SQUARE Latches & Flip-Flops 1,754

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Length	Family
M74HC279C1R	STMicroelectronics	R-S LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	4		CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	33 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		WITH DUAL S INPUT FOR TWO FUNCTIONS	e3	8.9662 mm	HC/UH
T74LS76AC1	STMicroelectronics	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2		TTL			5	5		CHIP CARRIER	LDCC20,.4SQ		8 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20				Not Qualified			6 mA
M74HC107C1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	24000000 Hz	CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V			e0	8.9662 mm	HC/UH
T74LS174C1	STMicroelectronics	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		TTL		6	5		15 pF	CHIP CARRIER		30 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20	5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	26 mA			8.9662 mm	LS
M74HCT75C1R	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2		CMOS		2	5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V			e3	8.9662 mm	HCT
M74HC273C1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS		8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	45 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	22 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V			e0	8.9662 mm	HC/UH
T74LS173AC1	STMicroelectronics	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	4	30000000 Hz	TTL			5	5		CHIP CARRIER	LDCC20,.4SQ		24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20				Not Qualified			30 mA
T74LS113AC1	STMicroelectronics	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2		TTL		2	5		15 pF	CHIP CARRIER		20 ns			1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20	5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	8 mA			8.9662 mm	LS
M74HC76C1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	24000000 Hz	CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	36 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V			e0	8.9662 mm	HC/UH
M74HC174C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	29000000 Hz	CMOS		6	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	34 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	29 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V			e3	8.9662 mm	HC/UH
M74HC112C1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	24000000 Hz	CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	38 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V			e0	8.9662 mm	HC/UH
M74HC173C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	34000000 Hz	CMOS		4	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	36 ns	6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	34 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE; WITH DUAL OUTPUT ENABLE	e3	8.9662 mm	HC/UH
HCF4044BC1	STMicroelectronics	R-S LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		CMOS		4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	300 ns		FF/Latches	1.27 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	15 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	3 V			e3	8.9662 mm	4000/14000/40000
M74HCT174C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		6	5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ	35 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20	5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V			e3	8.9662 mm	HCT
M74HCT74C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	22000000 Hz	CMOS		1	5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	22 MHz	S-PQCC-J20	5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V			e3	8.9662 mm	HCT
M74HC73C1R	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	31000000 Hz	CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	31 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		MASTER SLAVE OPERATION	e3	8.9662 mm	HC/UH
M74HC107C1R	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	31000000 Hz	CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	31 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	MATTE TIN	QUAD	25 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		MASTER SLAVE OPERATION	e3	8.9662 mm	HC/UH
M74HC76C1R	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	31000000 Hz	CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	31 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	MATTE TIN	QUAD	25 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		MASTER SLAVE OPERATION	e3	8.9662 mm	HC/UH
M74HC173C1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		4	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE; WITH DUAL OUTPUT ENABLE	e0	8.9662 mm	HC/UH
M74HC113C1R	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	32000000 Hz	CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	31 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	MATTE TIN	QUAD	32 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V			e3	8.9662 mm	HC/UH
M74HC273C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	36 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V			e3	8.9662 mm	HC/UH
T74LS75C1	STMicroelectronics	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2		TTL		2	5	5	15 pF	CHIP CARRIER	LCC20,.35SQ	25 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		HIGH LEVEL	0 Cel		QUAD		S-PQCC-J20	5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	12 mA			8.9662 mm	LS
M74HC377C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	29000000 Hz	CMOS		8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	35 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	29 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE	e3	8.9662 mm	HC/UH
M74HCT7259C1R	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		CMOS		1	5	5	150 pF	CHIP CARRIER	LDCC20,.4SQ	49 ns	80 Amp	FF/Latches	1.27 mm	85 Cel	OPEN-DRAIN	LOW LEVEL	-40 Cel	TIN LEAD	QUAD		S-PQCC-J20	5.5 V	4.57 mm	8.965 mm	Not Qualified	INVERTED	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e0	8.965 mm	HCT
T74LS273C1	STMicroelectronics	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		TTL		8	5			CHIP CARRIER		27 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20	5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	27 mA			8.9662 mm	LS
HCF4042BC1	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		CMOS		4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	500 ns		FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	15 V	4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY	3 V		PROGRAMMABLE TRIGGER TYPE	e3	8.965 mm	4000/14000/40000
M74HC174C1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS		6	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	45 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	22 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V			e0	8.9662 mm	HC/UH
M74HC77C1R	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2		CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	25 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V			e3	8.9662 mm	HC/UH
T74LS107AC1	STMicroelectronics	J-K FLIP-FLOP	COMMERCIAL	NO LEAD	20	QCCN	SQUARE		PLASTIC/EPOXY	YES	2	30000000 Hz	TTL			5	5		CHIP CARRIER	LCC20,.35SQ		8 Amp	FF/Latches	1.27 mm	70 Cel		MASTER-SLAVE	0 Cel		QUAD		S-PQCC-N20				Not Qualified			6 mA
M74HC259C1	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		CMOS		1	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	QUAD		S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e0	8.9662 mm	HC/UH
HCF4027BC1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	3500000 Hz	CMOS		2	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	300 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3.5 MHz	S-PQCC-J20	15 V	4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY	3 V			e3	8.965 mm	4000/14000/40000
T74LS114AC1	STMicroelectronics	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		TTL		2	5		15 pF	CHIP CARRIER		20 ns			1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20	5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA	WITH INDIVIDUAL SET INPUTS		8.9662 mm	LS
M74HC375C1R	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2		CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	26 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V			e3	8.9662 mm	HC/UH
T74LS399C1	STMicroelectronics	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		TTL	2	4	5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	32 ns	8 Amp	Multiplexer/Demultiplexers	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	TIN LEAD	QUAD		S-PQCC-J20	5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	13 mA	FOUR 2:1 MUX FOLLOWED BY REGISTER	e0	8.9662 mm	LS
M74HCT273C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ	38 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20	5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V			e3	8.9662 mm	HCT
M74HC109C1	STMicroelectronics	J-KBAR FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	24000000 Hz	CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V			e0	8.9662 mm	HC/UH
T74LS378C1	STMicroelectronics	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		TTL		6	5			CHIP CARRIER		27 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20	5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	27 mA	WITH HOLD MODE		8.9662 mm	LS
T74LS379C1	STMicroelectronics	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	30000000 Hz	TTL		4	5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20	5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	16 mA	WITH HOLD MODE		8.9662 mm	LS
M74HC74C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	38000000 Hz	CMOS		1	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	38 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	25 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V			e3	8.9662 mm	HC/UH
HCF4724BC1	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		CMOS		1	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	400 ns		FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	15 V	4.57 mm	8.965 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e3	8.965 mm	4000/14000/40000
M74HC113C1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	26000000 Hz	CMOS		2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	34 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	26 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V			e0	8.9662 mm	HC/UH
M74HC175C1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		4	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V			e0	8.9662 mm	HC/UH
M74HC75C1	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2		CMOS		1	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	36 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	TIN LEAD	QUAD		S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V			e0	8.9662 mm	HC/UH
M54HC273KG	STMicroelectronics	D FLIP-FLOP		FLAT	20	DFP	SQUARE	50k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	1		CMOS		8				FLATPACK	FL20,.3				1.27 mm	125 Cel			-55 Cel		DUAL		S-CDFP-F20	6 V	2.33 mm	10.16 mm			2 V				10.16 mm	HC
HCF4076BC1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1	3000000 Hz	CMOS		4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	600 ns		FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	8 MHz	S-PQCC-J20	15 V	4.57 mm	8.965 mm	Not Qualified	TRUE	3 V		WITH HOLD MODE; WITH DUAL OUTPUT ENABLE	e3	8.965 mm	4000/14000/40000
T74LS256C1	STMicroelectronics	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	1		TTL		2	5		15 pF	CHIP CARRIER		24 ns			1.27 mm	70 Cel		LOW LEVEL	0 Cel		QUAD		S-PQCC-J20	5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	25 mA	TWO 1:4 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH		8.9662 mm	LS
T74LS74AC1	STMicroelectronics	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2		TTL		1	5		15 pF	CHIP CARRIER		40 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	25 MHz	S-PQCC-J20	5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	8 mA			8.9662 mm	LS
HCF4013BC1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	2	3500000 Hz	CMOS		1	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	300 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3.5 MHz	S-PQCC-J20	15 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	3 V			e3	8.9662 mm	4000/14000/40000

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.