COMMERCIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS377NSRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	30000000 Hz	TTL	8	TR	5	5		SMALL OUTLINE	SOP20,.3	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G20	1	5.25 V	2 mm	5.3 mm	Not Qualified	TRUE	4.75 V	28 mA		e4	30	260	12.6 mm	LS
SN74276N	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4		5		15 pF	IN-LINE	DIP20,.3	30 ns		FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	35 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	81 mA	SEPARATE CLOCK FOR EACH BIT		NOT SPECIFIED	NOT SPECIFIED	25.4 mm	TTL/H/L
SN74ALS991DWR	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8		5		50 pF	SMALL OUTLINE		23 ns			1.27 mm	70 Cel		HIGH LEVEL		DUAL		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	INVERTED	4.5 V	75 mA	WITH READ-BACK				12.8 mm	ALS
SN74AS879NTP1	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL						IN-LINE	DIP24,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T24					Not Qualified
SN74SSTU32866AGKER	Texas Instruments	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	25		1.8	1.8		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,32	2.5 ns		Other Logic ICs	.8 mm	70 Cel		POSITIVE EDGE		BOTTOM	500 MHz	R-PBGA-B96		1.9 V	1.4 mm	5.5 mm	Not Qualified	TRUE	1.7 V						13.5 mm	SSTU
SN74ALS843JT	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO	1		TTL	9		5	5		IN-LINE	DIP24,.3		24 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-XDIP-T24					Not Qualified
SN74ALS74ANE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	34000000 Hz	TTL	1	TUBE	5	5	50 pF	IN-LINE	DIP14,.3	18 ns	8 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	34 MHz	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	4 mA		e4			19.305 mm	ALS
SN74ALS991NP3	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8					IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-PDIP-T20
SN74LS173N	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		TTL			5	5		IN-LINE	DIP16,.3		24 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS114AN-10	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	2		5		50 pF	IN-LINE		19 ns			2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	30 MHz	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	4.5 mA	WITH INDIVIDUAL SET INPUTS				19.305 mm	ALS
SN74F114D	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	90000000 Hz	TTL	2		5	5	50 pF	SMALL OUTLINE	SOP14,.25	8.5 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE		DUAL	90 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	19 mA	WITH INDIVIDUAL SET INPUTS		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	F/FAST
SN74LS74NP3	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDIP-T14											NOT SPECIFIED	NOT SPECIFIED
SN74S175D	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	TTL	4	TUBE	5	5	15 pF	SMALL OUTLINE	SOP16,.25	17 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	75 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	96 mA		e4	NOT SPECIFIED	260	9.9 mm	S
SN74ALS846JT4	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO	1		TTL	8					IN-LINE	DIP24,.3		24 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-XDIP-T24
SN74AS846NTP1	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8					IN-LINE	DIP24,.3			FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-PDIP-T24					Not Qualified
SN74AS109ADRE4	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL	2	TR	5		50 pF	SMALL OUTLINE	SOP16,.25	9 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL	105 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	17 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
5962-00-420-1677	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL			5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		MASTER-SLAVE		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AS534J4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		TTL			5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-XDIP-T20
CD74FCT273EE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	70000000 Hz	BICMOS	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	13 ns	48 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	70 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V			e4			25.4 mm	FCT
5962-01-302-9133	Texas Instruments	R-S LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		TTL	1	TUBE	5	5		IN-LINE	DIP16,.3		8 Amp	FF/Latches	2.54 mm	70 Cel				DUAL		R-PDIP-T16					Not Qualified			7 mA
5962-01-158-3471	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	2		TTL			5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL		R-XDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74S74NP1	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDIP-T14					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS174JP4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	6		TTL			5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-XDIP-T16
SN74116N1	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL	4		5	5		IN-LINE	DIP24,.6			FF/Latches	2.54 mm	70 Cel				DUAL		R-PDIP-T24					Not Qualified
SN74AS114N1	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL						IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL		R-PDIP-T14					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LS375DRG4	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL	2	TR	5	5		SMALL OUTLINE	SOP16,.25	30 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	12 mA	DUMMY VAL		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74LS174NE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	30000000 Hz	TTL	6	TUBE	5	5	15 pF	IN-LINE	DIP16,.3	30 ns	8 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	26 mA		e4			19.305 mm	LS
SN74AS175FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		TTL			5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		QUAD		S-PQCC-J20
SN74ALS114AFN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL			5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE		QUAD		S-PQCC-J20
SN74F175N3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4	100000000 Hz	TTL	1		5	5		IN-LINE	DIP16,.3	9.5 ns	20 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL	100 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	34 mA			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	F/FAST
SN74LS273JP4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		TTL			5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-XDIP-T20
SN74AS29823DWP3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	9		TTL						SMALL OUTLINE	SOP24,.4			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDSO-G24											NOT SPECIFIED	NOT SPECIFIED
SN74ALS109ADP3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL			5	5		SMALL OUTLINE	SOP16,.25			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDSO-G16
SN74F273DW-00R	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8		5			SMALL OUTLINE					1.27 mm	70 Cel		POSITIVE EDGE		DUAL	145 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V						12.8 mm	F/FAST
SN74F113D-00	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL	2		5			SMALL OUTLINE		7 ns			1.27 mm	70 Cel		NEGATIVE EDGE		DUAL	125 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V						8.65 mm	F/FAST
SN74ALS574N3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		TTL			5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T20
SN74F112N-10	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL	2		5			IN-LINE		7.5 ns			2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	130 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V						19.305 mm	F/FAST
SN74SSTV16857DGVRG	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	14		2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.25,16	2.8 ns		Other Logic ICs	.4 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	200 MHz	R-PDSO-G48	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2.3 V			e4	30	260	9.7 mm	SSTV
SN74ALS374N1	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		TTL			5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T20					Not Qualified
SN74S114D3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL			5	5		SMALL OUTLINE	SOP14,.25			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE		DUAL		R-PDSO-G14
SN74LS112N	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL	2		5	5		IN-LINE	DIP16,.3	20 ns		FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	30 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74ALS577FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL			5	5		CHIP CARRIER	LDCC28,.5SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		QUAD		S-PQCC-J28
SN74S174DR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	6	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.25	17 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL	75 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	144 mA					9.9 mm	S
SN74LS375NP1	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4		5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel				DUAL		R-PDIP-T16					Not Qualified
SN74LS375NP3	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4		5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel				DUAL		R-PDIP-T16
SN74ALS876JT	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO	2		TTL			5	5		IN-LINE	DIP24,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-XDIP-T24					Not Qualified
SN74175DR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	4		5			SMALL OUTLINE		35 ns			1.27 mm	70 Cel		POSITIVE EDGE		DUAL	25 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V						9.9 mm	TTL/H/L
SN74ALS577JT	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO	8		TTL			5	5		IN-LINE	DIP24,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-XDIP-T24					Not Qualified

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.