INDUSTRIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74HCT564DW3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	8		CMOS			5	5		SMALL OUTLINE	SOP20,.4		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20
SN74HC373N1	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	8			2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74AUP1G79DBVT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	220000000 Hz	CMOS	1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	24 ns	4 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.45 mm	1.6 mm	Not Qualified	TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2.9 mm	AUP/ULP/V
SN74HC375J4	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		CMOS	4			2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-XDIP-T16
SN74HC73N3	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		CMOS				2/6		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDIP-T14
SN74AHC74DBRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	75000000 Hz	CMOS	1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	17.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	6.2 mm	AHC/VHC/H/U/V
SN74HCT534NP3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8		CMOS			5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20
SN74HC563N1	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	8			2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74AC11109DR	Texas Instruments	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS	2		5			SMALL OUTLINE		12.7 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V						9.9 mm	AC
SN74HCT74D-00	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS	1		5		50 pF	SMALL OUTLINE		35 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	22 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V						8.65 mm	HCT
SN74HC114FHP4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC		YES	2		CMOS				2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		QUAD		S-XQCC-N20
CD4013BCJ	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	2		CMOS	1		5			IN-LINE		350 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-GDIP-T14		15 V	5.08 mm	7.62 mm		COMPLEMENTARY	3 V		LG-MAX				19.939 mm	4000/14000/40000
SN74HCT564JP4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	8		CMOS			5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T20
SN74HC109FN	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	2		CMOS				2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LVC112DR	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS	2		3.3			SMALL OUTLINE					1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.7 V						9.9 mm	LVC/LCX/Z
SN74HC574FN	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	8	24000000 Hz	CMOS				2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALVC74DR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS	1		1.8			SMALL OUTLINE					1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14		3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1.65 V						8.65 mm	ALVC/VCX/A
SN74HC379N	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	20000000 Hz	CMOS	4		5		50 pF	IN-LINE	DIP16,.3	200 ns	5.2 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	23 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC/UH
SN74ACT11109N	Texas Instruments	J-KBAR FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		CMOS	2		5			IN-LINE		9.1 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V						19.305 mm	ACT
SN74AHC273NSRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS	8	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP20,.3	19.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	12.6 mm	AHC/VHC/H/U/V
SN74ABT273N	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	150000000 Hz	BICMOS	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	7.3 ns	64 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDIP-T20	1	5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	30 mA		e4	NOT SPECIFIED	260	24.325 mm	ABT
SN74AHC174DBRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	80000000 Hz	CMOS	6	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	16.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	6.2 mm	AHC/VHC/H/U/V
SN74HC374FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	8		CMOS				2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74HC174DE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	6	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e4	30	260	9.9 mm	HC/UH
SN74HC563DW3	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8			2/6		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20
SN74HC77N	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	4			2/6	50 pF	IN-LINE	DIP14,.3		5.2 Amp	FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-PDIP-T14					Not Qualified
SN74ACT74NSR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	125000000 Hz	CMOS	1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.3	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V	.02 mA		e4	NOT SPECIFIED	260	10.2 mm	ACT
SN74HC7074FH	Texas Instruments		INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	CERAMIC		YES			CMOS						CHIP CARRIER	LCC28,.45SQ			FF/Latches	1.27 mm	85 Cel			-40 Cel		QUAD		S-XQCC-N28					Not Qualified
SN74HC109DR-00	Texas Instruments	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		44 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V						9.9 mm	HC/UH
SN74LV175ADRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS	4	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	27 ns	6 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	LV/LV-A/LVX/H
SN74HCT534N	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8	25000000 Hz	CMOS			5	5	50 pF	IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74LVC112APWLE	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS	2	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	7.1 ns	24 Amp	FF/Latches	.65 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G16		3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1.65 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	LVC/LCX/Z
SN74LV175ANSRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS	4	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.3	27 ns	6 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	10.2 mm	LV/LV-A/LVX/H
MM74HC259N/A+	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	1		5			IN-LINE		225 ns				85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		6 V				TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH					HC/UH
SN74HC112DTG4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	20000000 Hz	CMOS	2	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	155 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	HC/UH
SN74AUP1G74YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	PLASTIC/EPOXY		YES	1	40000000 Hz	CMOS	1	TR	1.2	0.8/3.6	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	27 ns	.02 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	180 MHz	R-PBGA-B8		3.6 V	.5 mm	.9 mm	Not Qualified	COMPLEMENTARY	.8 V						1.9 mm	AUP/ULP/V
SN74HC379J-00	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		CMOS	4		5		50 pF	IN-LINE		40 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-GDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		WITH HOLD MODE				19.56 mm	HC/UH
SN74HC379FN	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	4		CMOS						CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74LVTH273NSR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	BICMOS	8	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3	5.5 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	2.7 V	5 mA		e4	30	260	12.6 mm	LVT
SN74HC78J	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	2	25000000 Hz	CMOS				2/6	50 pF	IN-LINE	DIP14,.3		5.2 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-XDIP-T14					Not Qualified
SN74LV174ANSE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	6		2.5			SMALL OUTLINE		23 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4			10.2 mm	LV/LV-A/LVX/H
SN74LVC74PW	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS	1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	6.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G14		3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V						5 mm	LVC/LCX/Z
SN74LV273ADBLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS	8	TR	2.5	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	25 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	LV/LV-A/LVX/H
SN74LV174APWRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS	6	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	23 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	5 mm	LV/LV-A/LVX/H
SN74HC73N	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	25000000 Hz	CMOS				2/6	50 pF	IN-LINE	DIP14,.3		5.2 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDIP-T14					Not Qualified
SN74LV174ADBR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS	6	TR	2.5	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	23 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	LV/LV-A/LVX/H
SN74HC378N-10	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	6		5		50 pF	IN-LINE		40 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE				19.305 mm	HC/UH
SN74HC109NE4	Texas Instruments	J-KBAR FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	2	25000000 Hz	CMOS	2	TUBE	5	2/6	50 pF	IN-LINE	DIP16,.3	220 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		6 V	5.08 mm	6.35 mm	Not Qualified	COMPLEMENTARY	2 V	.04 mA	DUMMY VAL	e4			19.3 mm	HC

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.