INDUSTRIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Length	Family
HCF4027BE	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	3500000 Hz	CMOS			3/15	50 pF	IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel		MASTER-SLAVE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16				Not Qualified				e0
M74HC73F1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2	24000000 Hz	CMOS	2	5	2/6	50 pF	IN-LINE	DIP14,.3	38 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-GDIP-T14	6 V	5 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e0		HC/UH
M74HC377F1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	24000000 Hz	CMOS	8	5	2/6	50 pF	IN-LINE	DIP20,.3	40 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-GDIP-T20	6 V	5 mm	7.62 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE	e0		HC/UH
M74HC77M1	STMicroelectronics	D LATCH	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2	5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	36 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G14	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e0	8.65 mm	HC/UH
M74HC113B1N	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	26000000 Hz	CMOS	2	5	2/6	50 pF	IN-LINE	DIP14,.3	34 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	26 MHz	R-PDIP-T14	6 V	5.1 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e0		HC/UH
M74HC112M1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	24000000 Hz	CMOS	2	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	38 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		e0	9.9 mm	HC/UH
M74HC76C1R	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	31000000 Hz	CMOS	2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	31 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	MATTE TIN	QUAD	25 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V	MASTER SLAVE OPERATION	e3	8.9662 mm	HC/UH
M74HC173C1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	4	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE; WITH DUAL OUTPUT ENABLE	e0	8.9662 mm	HC/UH
HCF4096BM	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3500000 Hz	CMOS			3/15	50 pF	SMALL OUTLINE	SOP14,.25			FF/Latches	1.27 mm	85 Cel		MASTER-SLAVE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14				Not Qualified				e0
M74HC113C1R	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	32000000 Hz	CMOS	2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	31 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	MATTE TIN	QUAD	32 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		e3	8.9662 mm	HC/UH
HCF4042BE	STMicroelectronics	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS	1		3/15	50 pF	IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel	TIN LEAD	DUAL		R-PDIP-T16				Not Qualified				e0
M74HC74M1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	22000000 Hz	CMOS	1	5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	22 MHz	R-PDSO-G14	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		e0	8.65 mm	HC/UH
HCF4027BF	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	2	3500000 Hz	CMOS			3/15	50 pF	IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel		MASTER-SLAVE	-40 Cel	TIN LEAD	DUAL		R-XDIP-T16				Not Qualified				e0
HCF40174BE	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6	3500000 Hz	CMOS			5/15	50 pF	IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16				Not Qualified				e0
M74HC259F1	STMicroelectronics	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS	1	5	2/6	50 pF	IN-LINE	DIP16,.3	41 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-GDIP-T16	6 V	5 mm	7.62 mm	Not Qualified	TRUE	2 V	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e0		HC/UH
M74HC73B1N	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	24000000 Hz	CMOS	2	5	2/6	50 pF	IN-LINE	DIP14,.3	38 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-PDIP-T14	6 V	5.1 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e0		HC/UH
HCF4095BE	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	3500000 Hz	CMOS			3/15	50 pF	IN-LINE	DIP14,.3			FF/Latches	2.54 mm	85 Cel		MASTER-SLAVE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T14				Not Qualified				e0
M74HC273C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	36 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		e3	8.9662 mm	HC/UH
M74HC109M1	STMicroelectronics	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	24000000 Hz	CMOS	2	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	41 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		e0	9.9 mm	HC/UH
M74HC377C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	29000000 Hz	CMOS	8	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	35 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	29 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE	e3	8.9662 mm	HC/UH
M74HCT7259C1R	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	1	5	5	150 pF	CHIP CARRIER	LDCC20,.4SQ	49 ns	80 Amp	FF/Latches	1.27 mm	85 Cel	OPEN-DRAIN	LOW LEVEL	-40 Cel	TIN LEAD	QUAD		S-PQCC-J20	5.5 V	4.57 mm	8.965 mm	Not Qualified	INVERTED	4.5 V	1:8 DMUX FOLLOWED BY LATCH	e0	8.965 mm	HCT
M74HC74B1N	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	22000000 Hz	CMOS	1	5	2/6	50 pF	IN-LINE	DIP14,.3	40 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	22 MHz	R-PDIP-T14	6 V	5.1 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e0		HC/UH
M74HC75B1N	STMicroelectronics	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	1	5	2/6	50 pF	IN-LINE	DIP16,.3	36 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		HIGH LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDIP-T16	6 V	5.1 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e0		HC/UH
HCF4042BC1	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	4	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	500 ns		FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	15 V	4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY	3 V	PROGRAMMABLE TRIGGER TYPE	e3	8.965 mm	4000/14000/40000
M74HC173M1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	4	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	41 ns	6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE; WITH DUAL OUTPUT ENABLE	e0	9.9 mm	HC/UH
M74HC174C1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS	6	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	45 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	22 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		e0	8.9662 mm	HC/UH
HCF4099BE	STMicroelectronics	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8		3/15	50 pF	IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16				Not Qualified				e0
M74HC279B1N	STMicroelectronics	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS	2	5	2/6	50 pF	IN-LINE	DIP16,.3	33 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDIP-T16	6 V	5.1 mm	7.62 mm	Not Qualified	TRUE	2 V	WITH DUAL S INPUT FOR TWO FUNCTIONS	e0		HC/UH
M74HC77C1R	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		CMOS	2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	25 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V		e3	8.9662 mm	HC/UH
HCF4076BF	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	4	3000000 Hz	CMOS			3/15	50 pF	IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-XDIP-T16				Not Qualified				e0
M74HC259C1	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	1	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	QUAD		S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	2 V	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e0	8.9662 mm	HC/UH
M74HC107B1N	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	24000000 Hz	CMOS	2	5	2/6	50 pF	IN-LINE	DIP14,.3	41 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-PDIP-T14	6 V	5.1 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e0		HC/UH
M74HC377M1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	40 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G20	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE	e0	12.8 mm	HC/UH
HCF4027BC1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	3500000 Hz	CMOS	2	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	300 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	3.5 MHz	S-PQCC-J20	15 V	4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY	3 V		e3	8.965 mm	4000/14000/40000
M74HC77B1N	STMicroelectronics	D LATCH	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	2	5	2/6	50 pF	IN-LINE	DIP14,.3	36 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		HIGH LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDIP-T14	6 V	5.1 mm	7.62 mm	Not Qualified	TRUE	2 V		e0		HC/UH
M74HC375C1R	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		CMOS	2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	26 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		e3	8.9662 mm	HC/UH
M74HC174F1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	22000000 Hz	CMOS	6	5	2/6	50 pF	IN-LINE	DIP16,.3	45 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	22 MHz	R-GDIP-T16	6 V	5 mm	7.62 mm	Not Qualified	TRUE	2 V		e0		HC/UH
M74HCT273C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ	38 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	24 MHz	S-PQCC-J20	5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V		e3	8.9662 mm	HCT
M74HC109C1	STMicroelectronics	J-KBAR FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	24000000 Hz	CMOS	2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		e0	8.9662 mm	HC/UH
M74HC375M1R	STMicroelectronics	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	26 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		e4	9.9 mm	HC/UH
M74HC112F1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2	24000000 Hz	CMOS	2	5	2/6	50 pF	IN-LINE	DIP16,.3	38 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-GDIP-T16	6 V	5 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e0		HC/UH
M74HC74F1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2	22000000 Hz	CMOS	1	5	2/6	50 pF	IN-LINE	DIP14,.3	40 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	22 MHz	R-GDIP-T14	6 V	5 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e0		HC/UH
M74HC74C1R	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	38000000 Hz	CMOS	1	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	38 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD	25 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		e3	8.9662 mm	HC/UH
HCF4724BC1	STMicroelectronics	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	1	5	3/15	50 pF	CHIP CARRIER	LDCC20,.4SQ	400 ns		FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	MATTE TIN	QUAD		S-PQCC-J20	15 V	4.57 mm	8.965 mm	Not Qualified	TRUE	3 V	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e3	8.965 mm	4000/14000/40000
M74HC113C1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	26000000 Hz	CMOS	2	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	34 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	26 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		e0	8.9662 mm	HC/UH
M74HC113F1	STMicroelectronics	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2	26000000 Hz	CMOS	2	5	2/6	50 pF	IN-LINE	DIP14,.3	34 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	26 MHz	R-GDIP-T14	6 V	5 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		e0		HC/UH
M74HC174M1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	22000000 Hz	CMOS	6	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	45 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	22 MHz	R-PDSO-G16	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e0	9.9 mm	HC/UH
M74HC175C1	STMicroelectronics	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	4	5	2/6	50 pF	CHIP CARRIER	LDCC20,.4SQ	41 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD	24 MHz	S-PQCC-J20	6 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	2 V		e0	8.9662 mm	HC/UH

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.