INDUSTRIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MM74HC175NX	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS	4		5		50 pF	IN-LINE	DIP16,.3	190 ns	4 Amp		2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel		DUAL	28 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm		COMPLEMENTARY	2 V						19.3 mm	HC/UH
MC74ACT74DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS	1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	13 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4		260	5 mm	ACT
MC10EL52DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1800000000 Hz	ECL	1	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.465 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	10EL
MC10EL51DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL	1	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.565 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	10EL
MC10EL31DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL	1	TR	5	-5.2		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC100EL35DR2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL	2	TR	5	+-5		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1800 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	4.9 mm	100EL
MC74ACT377DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	11 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e3	30	260	12.8 mm	ACT
MC100EL30DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL	3	TR	5	-4.5		SMALL OUTLINE	SOP20,.4	.82 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1200 MHz	R-PDSO-G20		5.7 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC10EP35D	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	2	RAIL	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.49 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	4.9 mm	10E
MC100LVEL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL	1	RAIL	3.3	-3.3		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2900 MHz	R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	38 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	4.9 mm	100LVEL
MC74ACT574ML2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	85000000 Hz	CMOS		TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3		24 Amp	FF/Latches	1.27 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC10EP131MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1	3000000000 Hz	ECL	4	TR	3.3	-5.2		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.6 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	QUAD		S-XQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V	120 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	10E
MC100EL52D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL	1	RAIL	5	-4.5		SMALL OUTLINE	SOP8,.25	.465 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	4.9 mm	100EL
MC74VHCT74AML2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS		TR	5	5	50 pF	SMALL OUTLINE	SOP14,.3		8 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified					e0
MC10EP31DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	1	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	10E
MC100EL35MNR4G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	1400000000 Hz	ECL	2	TR	5	+-5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.7 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	2 mm	100EL
MC10EP52DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL	1	RAIL	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn90Pb10)	DUAL		S-PDSO-G8		5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0	30	235	3 mm	10E
MC74AC377DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS	8	RAIL	5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	14.5 ns	12 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	AC
MC100EL35DT	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL	2	RAIL	5	+-5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.7 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1800 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	100EL
MC74LVX74MR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		2.7			SMALL OUTLINE		22 ns			1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	80 MHz	R-PDSO-G14		3.6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e0			10.2 mm	LV/LV-A/LVX/H
MC74LVX74MEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	50000000 Hz	CMOS	1	TR	2.7	3.3	50 pF	SMALL OUTLINE	SOP14,.3	22 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14	3	3.6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	LV/LV-A/LVX/H
MC74AC74ML2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	95000000 Hz	CMOS	1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.3	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	125 MHz	R-PDSO-G14		6 V			Not Qualified	COMPLEMENTARY	2 V			e0				AC
MC10EL35DG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL	2	RAIL	5	-5.2		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC10EL35DTR2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL	2	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.7 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1800 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	10EL
MC10EP451MNG	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	6		3.3	-5.2		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.55 ns		Shift Registers	.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	10E
MC74AC574ML1	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	60000000 Hz	CMOS		TR		3.3/5	50 pF	SMALL OUTLINE	SOP20,.3		12 Amp	FF/Latches	1.27 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified		3 V			e0
MM74HCT74SJX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5			SMALL OUTLINE		44 ns				85 Cel			POSITIVE EDGE	-40 Cel		DUAL	50 MHz	R-PDSO-G14		5.5 V				COMPLEMENTARY	4.5 V							HCT
NC7SP74K8X	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS	1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	43 ns	.5 Amp	FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	250 MHz	R-PDSO-G8	1	3.6 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.9 V			e3	30	260	2.3 mm	P
MC10EP451FAG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	6		3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.55 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	7 mm	10E
MC74AC259MELG	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	17 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4		260	10.2 mm	AC
MC100EL31DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL	1	TR	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	100EL
MC74AC574DTEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	60000000 Hz	CMOS		TR		3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		12 Amp	FF/Latches	.635 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified		3 V			e0
MC74AC374ML2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	60000000 Hz	CMOS		TR		3.3/5	50 pF	SMALL OUTLINE	SOP20,.3		12 Amp	FF/Latches	1.27 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified		3 V			e0
MC74ACT174DTEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	140000000 Hz	CMOS	6	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	11.5 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	140 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e0			5 mm	ACT
MC74AC374MR1	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	60000000 Hz	CMOS		TR		3.3/5	50 pF	SMALL OUTLINE	SOP20,.3		12 Amp	FF/Latches	1.27 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified		3 V			e0
MC100EP35DTR2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	2	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.49 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8		5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	100E
MC74AC273M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS	8		5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4			12.575 mm	AC
MM74HCT273NX	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS	1		5			IN-LINE		46 ns			2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm		TRUE	4.5 V						26.075 mm	HCT
MC100LVEL51DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL	1	TR	3.3	-3.3		SMALL OUTLINE	SOP8,.25	.52 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	2800 MHz	R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	4.9 mm	100LVEL
MC10EL51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL	1	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.565 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	10EL
MC74ACT175N	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	145000000 Hz	CMOS	4		5	5	50 pF	IN-LINE	DIP16,.3	12 ns	24 Amp	FF/Latches	2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	145 MHz	R-PDIP-T16		5.5 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0		235	19.175 mm	ACT
MC74ACT109DTR2	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS	2	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	13 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0			5 mm	ACT
MC74ACT74M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS	1		5	5	50 pF	SMALL OUTLINE	SOP14,.3	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14		5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			10.2 mm	ACT
MC100EL29DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL	1		5	-4.5		SMALL OUTLINE	SOP20,.4	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1100 MHz	R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC74HC74DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		TR		2/6		SMALL OUTLINE	SOP14,.25			FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified					e0
MC74LCX74SD	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS	1		3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	8 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	150 MHz	R-PDSO-G14		3.6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e0			6.2 mm	LVC/LCX/Z
MC10EL51DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL	1	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.565 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	10EL
MC10EP35DT	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	2	RAIL	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.49 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	10E

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.