INDUSTRIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74LCX74MX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS	1	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP14,.25	8.4 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	8.625 mm	LVC/LCX/Z
CD4027BCN	National Semiconductor	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	2500000 Hz	CMOS	2		5	3/15	50 pF	IN-LINE	DIP16,.3	400 ns		FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	2.5 MHz	R-PDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e0			19.305 mm	4000/14000/40000
MM74HCT74M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	21000000 Hz	CMOS	1	RAIL	5	5	50 pF	SMALL OUTLINE	SOP14,.25	44 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	21 MHz	R-PDSO-G14	1	5.5 V	1.753 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	8.625 mm	HCT
SN74HC174N	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	25000000 Hz	CMOS	6	TUBE	5	2/6	50 pF	IN-LINE	DIP16,.3	200 ns	5.2 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDIP-T16		6 V	5.08 mm	6.35 mm	Not Qualified	TRUE	2 V	.08 mA		e4			19.3 mm	HC
SN74HC175DRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	4	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	190 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	HC/UH
SN74HC175DRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	4	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	190 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	HC/UH
SN74HC259NE4	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	1		CMOS	8	TUBE	5	2/6	50 pF	IN-LINE	DIP16,.3	165 ns	5.2 Amp	FF/Latches	2.54 mm	85 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T16		6 V	5.08 mm	6.35 mm	Not Qualified	TRUE	2 V	.08 mA	1:8 DMUX FOLLOWED BY LATCH	e4			19.3 mm	HC
SN74HCT273DWRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	42 ns	4 Amp	FF/Latch	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.8 mm	HCT
SN74LV175ANSR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS	4	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.3	27 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V	.02 mA		e4	NOT SPECIFIED	260	10.2 mm	LV/LV-A/LVX/H
HEF4027BP	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	4000000 Hz	CMOS	2		5	5/15	50 pF	IN-LINE	DIP16,.3	210 ns	.36 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	4 MHz	R-PDIP-T16		15 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e4			19.025 mm	4000/14000/40000
MC74AC273DW	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	75000000 Hz	CMOS	8	RAIL	5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.4	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn80Pb20)	DUAL	125 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e0	30	235	12.8 mm	AC
MC74AC377DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	75000000 Hz	CMOS	8		5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.4	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn) - annealed	DUAL	125 MHz	R-PDSO-G20	3	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e3	40	260	12.8 mm	AC
SN74AHC273DWRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	70000000 Hz	CMOS	8	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP20,.4	19.5 ns	8 Amp	FF/Latch	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e4	30	260	12.8 mm	AHC/VHC/H/U/V
SN74HCT273DWRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	42 ns	4 Amp	FF/Latch	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.8 mm	HCT
SN74HCT74PWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	22000000 Hz	CMOS	1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	35 ns	4 Amp	FF/Latch	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V	.04 mA		e4	30	260	5 mm	HCT
SN74LV175AD	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	45000000 Hz	CMOS	4	TUBE	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	27 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V	.02 mA		e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
74LCX74BQX	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	14	HVQCCN	RECTANGULAR	UNSPECIFIED		YES	2	150000000 Hz	CMOS	1	TR	2.5	3.3	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	8.4 ns	24 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	150 MHz	R-XQCC-N14	1	3.6 V	.8 mm	2.5 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	3 mm	LVC/LCX/Z
HEF4027BP,652	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	4000000 Hz	CMOS	2		5	5/15	50 pF	IN-LINE	DIP16,.3	210 ns	.36 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	4 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e3			21.6 mm	4000/14000/40000
MC100EP51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL	1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.45 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
MC100EP31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL	1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.41 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	4.9 mm	100E
MC100EP51DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL	1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.45 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
MM74HC273SJX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	21000000 Hz	CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP20,.3	170 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	24 MHz	R-PDSO-G20	1	6 V	2.1 mm	5.3 mm	Not Qualified	TRUE	2 V	.16 mA		e3	30	260	12.6 mm	HC/UH
SY10EP51VKG	Microchip Technology	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1		ECL	1	TUBE	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.37 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	3000 MHz	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4	40	260	3 mm	10E
TC74HC279AF	Toshiba	R-S LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	4		CMOS	2		4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	165 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16		6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V			e0			10.3 mm	HC/UH
MC100EP131MNG	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED		YES	1	3000000000 Hz	ECL	4	TRAY	3.3	-4.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.6 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-XQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V	130 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
MC100EP52DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	4000000000 Hz	ECL	1	TUBE	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
NC7SZ74L8X-L22185	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED		YES	1	175000000 Hz	CMOS	1	TR	1.8	3.3	15 pF	CHIP CARRIER	LCC8,.06SQ,20	13 ns	32 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	250 MHz	S-XQCC-N8	1	5.5 V	.55 mm	1.6 mm	Not Qualified	COMPLEMENTARY	1.65 V	50 mA		e4	NOT SPECIFIED	NOT SPECIFIED	1.6 mm	LVC/LCX/Z
SN74HC273DWE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	21000000 Hz	CMOS	8	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		DUMMY VAL	e4	30	260	12.8 mm	HC/UH
SN74HC273DWG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	21000000 Hz	CMOS	8	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		DUMMY VAL	e4	30	260	12.8 mm	HC/UH
SN74HC377DWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	200 ns	5.2 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	23 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V	.08 mA	WITH HOLD MODE	e4	NOT SPECIFIED	260	12.8 mm	HC/UH
SN74HC377DWRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP20,.4	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE	e4	30	260	12.8 mm	HC/UH
SN74LVC2G74DCU	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	1		1.8			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		14.4 ns			.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-G8		5.5 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	1.65 V				NOT SPECIFIED	NOT SPECIFIED	2.3 mm	LVC/LCX/Z
SN74LVC2G80DCURE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	160000000 Hz	CMOS	1	TR	1.8	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	13.9 ns	24 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	.9 mm	2 mm	Not Qualified	INVERTED	1.65 V			e4	30	260	2.3 mm	LVC/LCX/Z
74AC74PC	National Semiconductor	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	95000000 Hz	CMOS	1		3.3	3.3/5	50 pF	IN-LINE	DIP14,.3	14.5 ns	12 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	125 MHz	R-PDIP-T14		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V			e0			19.18 mm	AC
74VHC175SJX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	75000000 Hz	CMOS	4	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP16,.3	17 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	2.1 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	10.2 mm	AHC/VHC
74VHC74MTCX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	75000000 Hz	CMOS	1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	17.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	AHC/VHC/H/U/V
HEF4027BPN	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	4000000 Hz	CMOS	2		5	5/15	50 pF	IN-LINE	DIP16,.3	210 ns	.36 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	4 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e3			21.6 mm	4000/14000/40000
HEF4043BP	NXP Semiconductors	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS	4	BULK	5	5/15	50 pF	IN-LINE	DIP16,.3	180 ns		FF/Latches	2.54 mm	85 Cel	3-STATE	HIGH LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T16		15 V	4.2 mm	7.62 mm	Not Qualified	TRUE	3 V			e4			19.025 mm	4000/14000/40000
NC7SZ175P6	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	150000000 Hz	CMOS	1		1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	16.5 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	175 MHz	R-PDSO-G6	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V			e3	30	260	2 mm	LVC/LCX/Z
SN74AUC74RGYR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	PLASTIC/EPOXY		YES	2	225000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14/18,.14SQ,20	4 ns	9 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	350 MHz	S-PQCC-N14	2	2.7 V	1 mm	3.5 mm	Not Qualified	COMPLEMENTARY	.8 V	.01 mA		e4	30	260	3.5 mm	AUC
SN74HC259NSRE4	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	165 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	10.2 mm	HC/UH
SN74HC259NSRG4	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	165 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	10.2 mm	HC/UH
SN74LVC1G79DBVRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS	1	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	20.5 ns	24 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	TRUE	1.65 V			e4	30	260	2.9 mm	LVC/LCX/Z
TC74HC74AF(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	25000000 Hz	CMOS		TUBE		2/6	50 pF	SMALL OUTLINE	SOP14,.3		4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14	1				Not Qualified						40	260
74LCX112MTCX	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	150000000 Hz	CMOS	2	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	9 ns	24 Amp	FF/Latches	.65 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	LVC/LCX/Z
74LVX273MTC	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS	8		2.7	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	24 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	LV/LV-A/LVX/H
HEF4027BPB	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		CMOS	2		5		50 pF	IN-LINE		210 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	4 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V						21.6 mm	4000/14000/40000
MC10EP51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY		YES	1	3000000000 Hz	ECL	1	RAIL	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.37 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	10E

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.