NXP Semiconductors Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
933669440652	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	4		4.5			IN-LINE		265 ns			2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V			e4			21.6 mm	HC/UH
N74LVC109DB-T	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		3.3		50 pF	SMALL OUTLINE, SHRINK PITCH		7.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	225 MHz	R-PDSO-G16		3.6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2.7 V						6.2 mm	LVC/LCX/Z
N74LVC109D-T	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		3.3		50 pF	SMALL OUTLINE		7.5 ns				85 Cel		POSITIVE EDGE	-40 Cel		DUAL	225 MHz	R-PDSO-G16		3.6 V			Not Qualified	COMPLEMENTARY	2.7 V							LVC/LCX/Z
935031380623	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL	1		5			SMALL OUTLINE		9.2 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			8.65 mm	F/FAST
SSTU32866EC/G	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	25		1.8	1.8		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,32	1.8 ns		Other Logic ICs	.8 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE	0 Cel		BOTTOM	450 MHz	R-PBGA-B96		1.9 V	1.5 mm	5.5 mm	Not Qualified	TRUE	1.7 V		14 BIT 1:2 CONFIGURATION ALSO POSSIBLE		NOT SPECIFIED	NOT SPECIFIED	13.5 mm	SSTU
933713380652	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		4.5			SMALL OUTLINE		265 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4			8.65 mm	HC/UH
935265474118	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS	1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		19 ns			.65 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			5 mm	AHC
935210640112	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		2.7			SMALL OUTLINE		11.2 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1.2 V			e4			12.8 mm	LVC/LCX/Z
74ABT16273ADGG-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS	8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G48		5.5 V	1.2 mm	6.1 mm	Not Qualified	TRUE	4.5 V						12.5 mm	ABT
74ABT16273ADGG	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS	8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G48		5.5 V	1.2 mm	6.1 mm	Not Qualified	TRUE	4.5 V						12.5 mm	ABT
935185820112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		45 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4			6.5 mm	HCT
935032360602	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL	1		5			IN-LINE		9.2 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.025 mm	F/FAST
SSTUA32866EC	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	14		1.8	1.8		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,32	1.8 ns		Other Logic ICs	.8 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE	0 Cel	TIN LEAD	BOTTOM	450 MHz	R-PBGA-B96		2 V	1.5 mm	5.5 mm	Not Qualified	COMPLEMENTARY	1.7 V			e0			13.5 mm	32866
100231F	NXP Semiconductors	D FLIP-FLOP	OTHER	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	1		ECL	3					IN-LINE		1.8 ns				85 Cel		POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	400 MHz	R-CDIP-T24						COMPLEMENTARY				e0				100K
74ABT16273DGG,518	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS	8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G48	1	5.5 V	1.2 mm	6.1 mm	Not Qualified	TRUE	4.5 V			e4			12.5 mm	ABT
933669130652	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	1		4.5			IN-LINE		265 ns			2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T14		6 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V			e4			19.025 mm	HC/UH
N74F379AD	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	155000000 Hz	TTL	4		5	5	50 pF	SMALL OUTLINE	SOP16,.25	8.5 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	155 MHz	R-PDSO-G16		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	42 mA	WITH HOLD MODE					F/FAST
74ABT5074D-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS	1		5			SMALL OUTLINE		4.5 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V		WITH METASTABLE IMMUNE CHARACTERISTICS				8.65 mm	ABT
935210640118	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		2.7			SMALL OUTLINE		11.2 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1.2 V			e4			12.8 mm	LVC/LCX/Z
935263079118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		19.5 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm		COMPLEMENTARY	2 V						5 mm	AHC/VHC/H/U/V
933715050653	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	6		5			SMALL OUTLINE		53 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e4			9.9 mm	HCT
N74ABT273AN	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		BICMOS	8		5		50 pF	IN-LINE		4.8 ns				85 Cel		POSITIVE EDGE	-40 Cel		DUAL	250 MHz	R-PDIP-T20		5.5 V			Not Qualified	TRUE	4.5 V	30 mA						ABT
74ABT74DB-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	BICMOS	1	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	4 ns	20 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V	.05 mA		e4	30	260	6.2 mm	ABT
935025650623	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL	1		5			SMALL OUTLINE		7.5 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			9.9 mm	F/FAST
935209340118	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5			SMALL OUTLINE		210 ns				85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	15 MHz	R-PDSO-G16	1	15 V			Not Qualified	COMPLEMENTARY	3 V			e4				4000/14000/40000
933714490652	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		4.5			SMALL OUTLINE		265 ns			1.27 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4			9.9 mm	HC/UH
74ABT377APW-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.9 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	250 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4		260	6.5 mm	ABT
74ABT5074DB	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS	1		5			SMALL OUTLINE, SHRINK PITCH		4.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G14		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V		WITH METASTABLE IMMUNE CHARACTERISTICS				6.2 mm	ABT
N74F1604D	NXP Semiconductors	D LATCH	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8		5			SMALL OUTLINE		15 ns			1.27 mm	70 Cel		LOW LEVEL	0 Cel		DUAL		R-PDSO-G28		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V						17.9 mm	F/FAST
N74ABT377D	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BICMOS	8		5		50 pF	SMALL OUTLINE		7.3 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE				12.8 mm	ABT
933372660652	NXP Semiconductors	D FLIP-FLOP		GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2			1		5			SMALL OUTLINE		220 ns			1.27 mm			POSITIVE EDGE		NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G14	1		1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY				e4			8.65 mm	4000/14000/40000
935198490118	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		60 ns			.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			5 mm	HCT
935031390602	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL	1		5			IN-LINE		9.2 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			19.025 mm	F/FAST
935269740112	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		1.8			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		6.2 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	300 MHz	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4			5 mm	ALVC/VCX/A
VC377PW	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		9.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-G20		3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1.2 V		WITH HOLD MODE				6.5 mm	LVC/LCX/Z
935208770112	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		BICMOS	1		5			IN-LINE		4 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			19.025 mm	ABT
935277198132	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1		1.8			SMALL OUTLINE, VERY THIN PROFILE		12.5 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-N6		5.5 V	.5 mm	1 mm		TRUE	1.65 V				NOT SPECIFIED	NOT SPECIFIED	1.45 mm	LVC/LCX/Z
935191070112	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		2.7			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		8.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1.2 V			e4			5 mm	LVC/LCX/Z
935052330623	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8		5			SMALL OUTLINE		10.5 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	120 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V		WITH HOLD MODE				12.8 mm	F/FAST
935272535151	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	56	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1			14		2.5			GRID ARRAY, VERY THIN PROFILE, FINE PITCH		2.8 ns			.65 mm	70 Cel		POSITIVE EDGE	0 Cel		BOTTOM	200 MHz	R-PBGA-B56		2.7 V	1 mm	4.5 mm	Not Qualified	TRUE	2.3 V				NOT SPECIFIED	NOT SPECIFIED	7 mm
N74F5074N,602	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL	1		5		50 pF	IN-LINE		6.5 ns			2.54 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	30 mA	WITH METASTABLE IMMUNE CHARACTERISTICS; MAX OUTPUT SKEW = 1.5NS	e4			19.025 mm	F/FAST
SSTUA32864EC/G	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	25		1.8	1.8		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,32	1.8 ns		Other Logic ICs	.8 mm	70 Cel		POSITIVE EDGE	0 Cel		BOTTOM	450 MHz	R-PBGA-B96	2	2 V	1.5 mm	5.5 mm	Not Qualified	TRUE	1.7 V						13.5 mm	SSTU
935067500112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8		3.3			IN-LINE		41 ns			2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T20		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	1 V			e4			26.73 mm	LV/LV-A/LVX/H
N74F379N	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4		5		50 pF	IN-LINE		9.5 ns				70 Cel		POSITIVE EDGE	0 Cel		DUAL	90 MHz	R-PDIP-T16		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	40 mA	WITH HOLD MODE					F/FAST
933779110602	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	6		5			SMALL OUTLINE		9.5 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	80 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V						9.9 mm	F/FAST
933824850005	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD		DIE	RECTANGULAR	UNSPECIFIED	YES	2		CMOS	2		5			UNCASED CHIP		190 ns				125 Cel		HIGH LEVEL	-40 Cel		UPPER		R-XUUC-N		6 V			Not Qualified	COMPLEMENTARY	2 V							HC/UH
74F379AD-T	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	4		5		50 pF	SMALL OUTLINE		8.5 ns				70 Cel		POSITIVE EDGE	0 Cel		DUAL	155 MHz	R-PDSO-G16		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V	42 mA	WITH HOLD MODE					F/FAST
74ALS112AN	NXP Semiconductors	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	35000000 Hz	TTL	2		5	5	50 pF	IN-LINE	DIP16,.3	10.5 ns	8 Amp	FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE	0 Cel		DUAL	35 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	4.5 mA					19.025 mm	ALS

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.