NXP Semiconductors Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
935175170118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			1		4.5			SMALL OUTLINE, SHRINK PITCH		265 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4			6.2 mm	HC/UH
SSTL16857	NXP Semiconductors	D LATCH	COMMERCIAL	GULL WING	48	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1					14		3.3			SMALL OUTLINE						70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G48		3.6 V			Not Qualified	TRUE	2.3 V							SSTL
74ABT273APW,118	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	250000000 Hz	BICMOS			8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.8 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	250 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	30 mA		e4	30	260	6.5 mm	ABT
54F173/BFA	NXP Semiconductors	D FLIP-FLOP	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL			4		5		50 pF	FLATPACK		11.5 ns			1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	80 MHz	R-CDFP-F16		5.5 V	2.159 mm	6.731 mm	Not Qualified	TRUE	4.5 V	37 mA	WITH HOLD MODE; WITH DUAL OUTPUT ENABLE					F/FAST
SSTUB32866EC/G,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS			25		1.8	1.8		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,32	1.5 ns		Other Logic ICs	.8 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE	0 Cel		BOTTOM	450 MHz	R-PBGA-B96	2	2 V	1.5 mm	5.5 mm	Not Qualified	COMPLEMENTARY	1.7 V						13.5 mm	32866
933715420653	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			2		5			SMALL OUTLINE		45 ns				125 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G16		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED		HCT
SSTUH32865ET	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	160	TFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS			28		1.8	1.8		GRID ARRAY, THIN PROFILE, FINE PITCH	BGA160,12X18,25	1.8 ns		Other Logic ICs	.65 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE	0 Cel	TIN LEAD	BOTTOM	450 MHz	R-PBGA-B160		1.9 V	1.2 mm	9 mm	Not Qualified	COMPLEMENTARY	1.7 V			e0			13 mm	SSTU
74ABT16273DL-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	BICMOS			8	TR	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	4 ns	64 Amp	FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	240 MHz	R-PDSO-G48	1	5.5 V	2.8 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4		260	15.875 mm	ABT
N74LVC109PW-T	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			2		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		7.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	225 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2.7 V						5 mm	LVC/LCX/Z
933824060005	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	NO LEAD		DIE	RECTANGULAR	UNSPECIFIED	YES	2		CMOS			1		5			UNCASED CHIP		240 ns				125 Cel		NEGATIVE EDGE	-40 Cel		UPPER	24 MHz	R-XUUC-N		6 V			Not Qualified	COMPLEMENTARY	2 V							HC/UH
74ABT377PWDH-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BICMOS			8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		7.3 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		WITH HOLD MODE				6.5 mm	ABT
935229880112	NXP Semiconductors	D FLIP-FLOP		GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2					1		5			SMALL OUTLINE		220 ns			1.27 mm			POSITIVE EDGE		NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G14	1		1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY				e4			8.65 mm	4000/14000/40000
935181620112	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			1		3.3			SMALL OUTLINE		70 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1 V						9.9 mm	LV/LV-A/LVX/H
N74F259N,602	NXP Semiconductors	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL			1		5	5	50 pF	IN-LINE	DIP16,.3	10 ns	20 Amp	FF/Latches	2.54 mm	70 Cel		LOW LEVEL	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	75 mA	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e4			19.025 mm	F/FAST
935174690112	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS			1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		255 ns			.65 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4			5 mm	HC/UH
935175150118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		53 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			5 mm	HCT
935007640602	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL			1		5			IN-LINE		6.5 ns			2.54 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	85 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V				40	245	19.025 mm	F/FAST
N74ALS273D-T	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL			8		5		50 pF	SMALL OUTLINE		11 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	65 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	29 mA					12.8 mm	ALS
935039720118	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL			4		5			SMALL OUTLINE		8.5 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	155 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V				40	260	9.9 mm	F/FAST
935182610118	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		70 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V			e4			5 mm	LV/LV-A/LVX/H
N74F399N	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	90000000 Hz	TTL		2	4		5	5	50 pF	IN-LINE	DIP16,.3	9 ns	20 Amp	Multiplexer/Demultiplexers	2.54 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	34 mA	FOUR 2:1 MUX FOLLOWED BY REGISTER	e4	40	260	19.025 mm	F/FAST
935170210118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			1		3.3			SMALL OUTLINE, SHRINK PITCH		56 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	56 MHz	R-PDSO-G14		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	LV/LV-A/LVX/H
SSTUG32868ET/G,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	176	TFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS			28		1.8			GRID ARRAY, THIN PROFILE, FINE PITCH		1.5 ns			.65 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE	0 Cel		BOTTOM	450 MHz	R-PBGA-B176	2	2 V	1.15 mm	6 mm	Not Qualified	COMPLEMENTARY	1.7 V						15 mm	32868
N74F50728D-T	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL			1		5		50 pF	SMALL OUTLINE		6.5 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	34 mA	CASCADED FLIP-FLOP REQUIRING 2 CLOCK CYCLES FOR INPUT TO ARRIVE AT OUTPUT				8.65 mm	F/FAST
54F175/B2A	NXP Semiconductors	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL			4		5		50 pF	CHIP CARRIER		10.5 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD	80 MHz	S-CQCC-N20		5.5 V	1.905 mm	8.89 mm	Not Qualified	COMPLEMENTARY	4.5 V	34 mA					8.89 mm	F/FAST
N74ALS112AD-T	NXP Semiconductors	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL			2		5		50 pF	SMALL OUTLINE		10.5 ns			1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		DUAL	35 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	4.5 mA					9.9 mm	ALS
N74F109D	NXP Semiconductors	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	90000000 Hz	TTL			2		5	5	50 pF	SMALL OUTLINE	SOP16,.25	9.2 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	17 mA		e4			9.9 mm	F/FAST
SSTUB32868ET/S	NXP Semiconductors	D FLIP-FLOP	OTHER	BALL	176	TFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1					28		1.8	1.8		GRID ARRAY, THIN PROFILE, FINE PITCH	BGA176,8X22,25	3 ns		Other Logic ICs	.65 mm	85 Cel		POSITIVE EDGE	0 Cel		BOTTOM	450 MHz	R-PBGA-B176	2	2 V	1.15 mm	6 mm	Not Qualified	TRUE	1.7 V						15 mm	32868
N74F259D-T	NXP Semiconductors	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL			1		5		50 pF	SMALL OUTLINE		10 ns				70 Cel		LOW LEVEL	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V	75 mA	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e4				F/FAST
N74ALS112AD	NXP Semiconductors	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL			2		5		50 pF	SMALL OUTLINE		10.5 ns			1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		DUAL	35 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	4.5 mA					9.9 mm	ALS
74F175AN	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL			4		5		50 pF	IN-LINE		9 ns			2.54 mm	70 Cel		POSITIVE EDGE	0 Cel	TIN/NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	31 mA		e3/e4			19.025 mm	F/FAST
54F398/BSA	NXP Semiconductors	D FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL			4		5			FLATPACK		10.5 ns				125 Cel		POSITIVE EDGE	-55 Cel		DUAL	120 MHz	R-CDFP-F20		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V		FOUR 2:1 MUX FOLLOWED BY REGISTER					F/FAST
935269741112	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			1		1.8			SMALL OUTLINE		6.2 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	300 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4			8.65 mm	ALVC/VCX/A
935085450118	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL			1		5			SMALL OUTLINE		7.5 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V						8.65 mm	F/FAST
N74LVC109PW	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			2		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		7.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	225 MHz	R-PDSO-G16		3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2.7 V						5 mm	LVC/LCX/Z
N74LV107N	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS			2		3.3		50 pF	IN-LINE		33 ns			2.54 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	1 V						19.025 mm	LV/LV-A/LVX/H
935025660602	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL			1		5			IN-LINE		7.5 ns			2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.025 mm	F/FAST
935037560623	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		TTL			1		5			SMALL OUTLINE		7.5 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			8.65 mm	F/FAST
935188360112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS			6		4.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		250 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			5 mm	HC/UH
S54F74F/883B	NXP Semiconductors	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	UNSPECIFIED	NO	2		TTL	MIL-STD-883 Class B		1	TUBE	5		50 pF	IN-LINE	DIP14,.3		20 Amp			125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL		R-XDIP-T14		5.5 V				COMPLEMENTARY	4.5 V	16 mA		e0				F/FAST
935208760112	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS			1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			5 mm	ABT
935271265518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1					13		2.5			GRID ARRAY, LOW PROFILE, FINE PITCH		2.8 ns			.8 mm	70 Cel		POSITIVE EDGE	0 Cel		BOTTOM	200 MHz	R-PBGA-B96		2.7 V	1.5 mm	5.5 mm	Not Qualified	TRUE	2.3 V				NOT SPECIFIED	NOT SPECIFIED	13.5 mm
N74ABT74DB-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS			1		5		50 pF	SMALL OUTLINE, SHRINK PITCH		4 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G14		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V	.05 mA					6.2 mm	ABT
BT16273DGG	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS			8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 ns			.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	240 MHz	R-PDSO-G48		5.5 V	1.2 mm	6.1 mm	Not Qualified	TRUE	4.5 V			e4			12.5 mm	ABT
935053560623	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL			8		5			SMALL OUTLINE		10 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4			12.8 mm	F/FAST
SSTUM32865ET/G,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	160	TFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1					28		1.8			GRID ARRAY, THIN PROFILE, FINE PITCH		1.4 ns			.65 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE	0 Cel		BOTTOM	450 MHz	R-PBGA-B160	2	2 V	1.15 mm	9 mm	Not Qualified	TRUE	1.7 V						13 mm	SSTU
54F259/BEA	NXP Semiconductors	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL			1		5			IN-LINE		11 ns			2.54 mm	125 Cel		LOW LEVEL	-55 Cel		DUAL		R-GDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH					F/FAST
935189200118	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			1		4.5			SMALL OUTLINE, SHRINK PITCH		265 ns			.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4			6.2 mm	HC/UH

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.