NXP Semiconductors Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74HCT377DB-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS	AEC-Q100	8	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	48 ns	.02 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V						7.2 mm	HCT
74LVC1G80GF	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1	TR	3.3	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	13 ns	24 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	200 MHz	S-PDSO-N6	1	5.5 V	.5 mm	1 mm	Not Qualified	INVERTED	1.65 V			e3	30	260	1 mm	LVC/LCX/Z
74HCT259BQ-Q100	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		57 ns			.5 mm	125 Cel		LOW LEVEL	-40 Cel		QUAD		R-PQCC-N16	1	5.5 V	1 mm	2.5 mm		TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH				3.5 mm	HCT
HEF4724BPB	NXP Semiconductors	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		1		5		50 pF	IN-LINE		230 ns			2.54 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				21.6 mm	4000/14000/40000
74AUP1G74GF	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.1			SMALL OUTLINE, VERY THIN PROFILE		23.3 ns			.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.5 mm	1 mm	Not Qualified	COMPLEMENTARY	.8 V			e3			1.35 mm	AUP/ULP/V
74AUP1G175GM,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	21 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	410 MHz	R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e3	30	260	1.45 mm	AUP/ULP/V
74HC112D	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	265 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	HC/UH
74AUP1G80GM-H	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.2			SMALL OUTLINE, VERY THIN PROFILE		27.2 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	510 MHz	R-PDSO-N6		3.6 V	.5 mm	1 mm	Not Qualified	INVERTED	.8 V						1.45 mm	AUP/ULP/V
74LVT273BQ,115	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.1X.18,20	6.3 ns	64 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	150 MHz	R-PQCC-N20	1	3.6 V	1 mm	2.5 mm	Not Qualified	TRUE	2.7 V			e4	30	260	4.5 mm	LVT
74AHC273PW/T3	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		21.5 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			6.5 mm	AHC/VHC/H/U/V
74LVT74PWDH	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS		1		3.3		50 pF	SMALL OUTLINE		5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G14		3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2.7 V	1 mA					5 mm	LVT
74AUP1G373GW	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	25.9 ns	1.7 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL		R-PDSO-G6	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V			e3	30	260	2 mm	AUP/ULP/V
74AUP1G80GN,132	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	SON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE	SOLCC6,.04,12	27.2 ns	1.7 Amp	FF/Latches	.3 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N6	1	3.6 V	.35 mm	.9 mm	Not Qualified	INVERTED	.8 V			e3	30	260	1 mm	AUP/ULP/V
74LVC273PW-Q100	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		22.2 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G20		3.6 V	1.1 mm	4.4 mm		TRUE	1.65 V						6.5 mm	LVC/LCX/Z
74AUP1G80GM-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.2			SMALL OUTLINE, VERY THIN PROFILE		27.2 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	INVERTED	.8 V			e3			1.45 mm	AUP/ULP/V
74HCT112D-T	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE		60 ns			1.27 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			9.9 mm	HCT
74AHCT74PW,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	11 ns	8 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	AHCT/VHCT
74LVT74D,118	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	BICMOS		1	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.25	5 ns	32 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.7 V	1 mA		e4	30	260	8.65 mm	LVT
74LVC1G74GD-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		1.8			SMALL OUTLINE, VERY THIN PROFILE		13.4 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-N8		5.5 V	.5 mm	2 mm		COMPLEMENTARY	1.65 V		SEATED HGT-NOM				3 mm	LVC/LCX/Z
SSTVF16859EC	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1				13		2.5	2.5		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,32	2.5 ns		Other Logic ICs	.8 mm	70 Cel		POSITIVE EDGE	0 Cel		BOTTOM	210 MHz	R-PBGA-B96		2.7 V	1.5 mm	5.5 mm	Not Qualified	TRUE	2.3 V						13.5 mm	SSTV
74LVT16273ADL	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS		8		3.3			SMALL OUTLINE, SHRINK PITCH		3.6 ns			.635 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G48		3.6 V	2.8 mm	7.5 mm	Not Qualified	TRUE	2.7 V	5 mA					15.875 mm	LVT
74AUP1G374GS	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1		1.1			SMALL OUTLINE, VERY THIN PROFILE		21.6 ns			.35 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN	DUAL	360 MHz	S-PDSO-N6	1	3.6 V	.35 mm	1 mm	Not Qualified	TRUE	.8 V			e3			1 mm	AUP/ULP/V
74HC107PW-Q100	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	2		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		240 ns			.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G14		6 V	1.1 mm	4.4 mm		COMPLEMENTARY	2 V						5 mm	HC/UH
74LVC1G79GM,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	12.5 ns	24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-N6	1	5.5 V	.5 mm	1 mm	Not Qualified	TRUE	1.65 V			e3	30	260	1.45 mm	LVC/LCX/Z
74AUP1G80GM,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	27.2 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	510 MHz	R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	INVERTED	.8 V			e3	30	260	1.45 mm	AUP/ULP/V
74HCT112DB,112	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	60 ns	4 Amp	FF/Latches	.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	6.2 mm	HCT
74AHC74D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		1	TR	5	2/5.5	50 pF	SMALL OUTLINE	SOP14,.25	19.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4			8.65 mm	AHC
74LVC109D,112	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS		2		3.3	3.3	50 pF	SMALL OUTLINE	SOP16,.25	7.5 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	225 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.7 V			e4	30	260	9.9 mm	LVC/LCX/Z
74LV273D,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.4	24 ns	6 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1 V			e4	30	260	12.8 mm	LV/LV-A/LVX/H
SSTVF16859BS,151	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	NO LEAD	56	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1				13		2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.5 ns			.5 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	QUAD	210 MHz	S-PQCC-N56	1	2.7 V	1 mm	8 mm	Not Qualified	TRUE	2.3 V			e4			8 mm	SSTV
5962-8855001RX	NXP Semiconductors	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL		8		5			IN-LINE		11 ns			2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	95 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V						24.51 mm	F/FAST
74HCT273PW-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		45 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V						6.5 mm	HCT
SSTV16857DGG-T	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				14		2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	2.8 ns		Other Logic ICs	.5 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	200 MHz	R-PDSO-G48	1	2.7 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.3 V			e4			12.5 mm	SSTV
74AUP1G79GF	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	25.6 ns	1.7 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	510 MHz	S-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e3	30	260	1 mm	AUP/ULP/V
74HC273BQ,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		225 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	24 MHz	R-PQCC-N20	1	6 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V			e4	30	260	4.5 mm	HC/UH
74HC377U	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD		DIE	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		8		5			UNCASED CHIP		240 ns				125 Cel		POSITIVE EDGE	-40 Cel		UPPER	24 MHz	R-XUUC-N		6 V			Not Qualified	TRUE	2 V							HC/UH
74HC107D	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	48 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	8.65 mm	HC/UH
SSTV16857DGV-T	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				14		2.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.8 ns			.4 mm	70 Cel		POSITIVE EDGE	0 Cel	TIN	DUAL	200 MHz	R-PDSO-G48		2.7 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2.3 V			e3			9.7 mm	SSTV
HEF40174BD	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	5000000 Hz	CMOS		6		5	5/15	50 pF	IN-LINE	DIP16,.3	155 ns	.36 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	5 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V							4000/14000/40000
74LV175DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		3.3		50 pF	SMALL OUTLINE		45 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1 V						6.2 mm	LV/LV-A/LVX/H
HEF4044BTD-T	NXP Semiconductors	R-S LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	185 ns		FF/Latches	1.27 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V				40	260	9.9 mm	4000/14000/40000
74HCT7273D,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4		4 Amp	FF/Latches	1.27 mm	125 Cel	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.8 mm	HCT
74HC173DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE, SHRINK PITCH		53 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE	e4			6.2 mm	HC/UH
SSTV16857DGG,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				14		2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	2.8 ns		Other Logic ICs	.5 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	200 MHz	R-PDSO-G48	1	2.7 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.3 V			e4			12.5 mm	SSTV
74HCT109D,653	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	18000000 Hz	CMOS		2	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	6 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	9.9 mm	HCT
SSTV16857DGB	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	48	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				14		2.5			SMALL OUTLINE		3.5 ns				70 Cel		POSITIVE EDGE	0 Cel		DUAL	200 MHz	R-PDSO-G48		2.7 V			Not Qualified	TRUE	2.3 V							SSTV
74HC109DB,118	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2	TR	4.5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	265 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	6.2 mm	HC/UH
74LV74DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		3.3		50 pF	SMALL OUTLINE, SHRINK PITCH		33 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	48 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1 V			e4			6.2 mm	LV/LV-A/LVX/H

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.