NXP Semiconductors Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74LVC273PWDH	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		11.2 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	230 MHz	R-PDSO-G20		3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1.2 V						6.5 mm	LVC/LCX/Z
74LVC74D-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		3.3		50 pF	SMALL OUTLINE		6.5 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G14		3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1.2 V						8.65 mm	LVC/LCX/Z
74AHC1G79GV-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		15.5 ns			.95 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G5		5.5 V	1.1 mm	1.5 mm		TRUE	2 V						2.9 mm	AHC/VHC/H/U/V
74LV273PWDH	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		24 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V						6.5 mm	LV/LV-A/LVX/H
HEF4044BP	NXP Semiconductors	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4	BULK	5	5/15	50 pF	IN-LINE	DIP16,.3	185 ns		FF/Latches	2.54 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T16		15 V	4.2 mm	7.62 mm	Not Qualified	TRUE	3 V			e4			19.025 mm	4000/14000/40000
74AUP2G79DC	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		1.1			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		25.6 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	510 MHz	R-PDSO-G8	1	3.6 V	1 mm	2 mm	Not Qualified	TRUE	.8 V				30	260	2.3 mm	AUP/ULP/V
74AUP1G373GW-G	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1			1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08		1.7 Amp	FF/Latches	.635 mm	125 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G6					Not Qualified
74AHC259D-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS		1	TR	5	2/5.5	50 pF	SMALL OUTLINE	SOP16,.25	18.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e4			9.9 mm	AHC
5962-9060602FX	NXP Semiconductors	J-K FLIP-FLOP	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	2		TTL	MIL-STD-883	2		5			FLATPACK		7.5 ns				125 Cel		NEGATIVE EDGE	-55 Cel		DUAL	90 MHz	R-GDFP-F16		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V							F/FAST
5962-9060602FA	NXP Semiconductors	J-K FLIP-FLOP	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	2		TTL	MIL-STD-883	2		5			FLATPACK		7.5 ns				125 Cel		NEGATIVE EDGE	-55 Cel	TIN LEAD	DUAL	90 MHz	R-GDFP-F16		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V			e0				F/FAST
74HC273PW-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		225 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G20		6 V	1.1 mm	4.4 mm		TRUE	2 V						6.5 mm	HC/UH
74AHC273D	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		8	TUBE	5	2/5.5	50 pF	SMALL OUTLINE	SOP20,.4	21.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e4	30	260	12.8 mm	AHC
74AHC273D,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		8	TR	5	2/5.5	50 pF	SMALL OUTLINE	SOP20,.4	21.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e4	30	260	12.8 mm	AHC
74HC174PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		6		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		250 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			5 mm	HC/UH
74LV377PWDH-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		36 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V		WITH HOLD MODE				6.5 mm	LV/LV-A/LVX/H
74LVT74D	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	BICMOS		1		3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.25	5 ns	32 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.7 V	1 mA		e4	30	260	8.65 mm	LVT
HEF4013BTT	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	7000000 Hz	CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP14,.25	220 ns		FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G14	1	15 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V			e4	30	260	5 mm	4000/14000/40000
74HCT175PW	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		4		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	50 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	HCT
74AUP1G74GD-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS			TR		1.2/3.3	30 pF	SMALL OUTLINE	SOLCC8,.11,20		1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-N8					Not Qualified
74LV377DB,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	36 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V		WITH HOLD MODE	e4	30	260	7.2 mm	LV/LV-A/LVX/H
74HCT74DB,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	18000000 Hz	CMOS		1	TUBE	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	53 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	6.2 mm	HCT
5962-3836101BEX	NXP Semiconductors	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL		4		5			IN-LINE		39 ns				125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	20 MHz	R-GDIP-T16		5.5 V			Not Qualified	TRUE	4.5 V							LS
74HC259DB,118	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	255 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	6.2 mm	HC/UH
74LVC1G80GV-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		13 ns			.95 mm	125 Cel		POSITIVE EDGE	-40 Cel	PURE TIN	DUAL	200 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.5 mm		INVERTED	1.65 V						2.9 mm	LVC/LCX/Z
74HC174D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		6	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	50 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e4	30	260	9.9 mm	HC/UH
74LVC1G175GV-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		17 ns			.95 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-G6		5.5 V	1.1 mm	1.5 mm		TRUE	1.65 V						2.9 mm	LVC/LCX/Z
74HC75D-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE		190 ns			1.27 mm	125 Cel		HIGH LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	HC/UH
74LVC74APW-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		11.9 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	120 MHz	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm		COMPLEMENTARY	1.2 V						5 mm	LVC/LCX/Z
74AUP2G79DC-Q100H	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	1		1.1			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		25.6 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	510 MHz	R-PDSO-G8		3.6 V	1 mm	2 mm		TRUE	.8 V						2.3 mm	AUP/ULP/V
74LVC1G74DC-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		1.8			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		13.4 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-G8	1	5.5 V	1 mm	2 mm		COMPLEMENTARY	1.65 V						2.3 mm	LVC/LCX/Z
SSTV16857DGG,512	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				14		2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	2.8 ns		Other Logic ICs	.5 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	200 MHz	R-PDSO-G48	1	2.7 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.3 V			e4		260	12.5 mm	SSTV
74HCT175PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		50 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	17 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			5 mm	HCT
74AUP1G373GM,132	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	25.9 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL		R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e3	30	260	1.45 mm	AUP/ULP/V
74HCT112N,652	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS		2		5	5	50 pF	IN-LINE	DIP16,.3	60 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		5.5 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			21.6 mm	HCT
74AHC1G79GW-Q100H	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	AEC-Q100	1		5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	15.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G5		5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	2 V						2.05 mm	AHC/VHC/H/U/V
74HC73PW,118	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	240 ns	4 Amp	FF/Latches	.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V		MASTER SLAVE OPERATION	e4	30	260	5 mm	HC/UH
74AUP1G374GW-Q100H	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	AEC-Q100	1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	21.6 ns	1.7 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	510 MHz	R-PDSO-G6		3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V			e3			2 mm	AUP/ULP/V
74AHC273D-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	AEC-Q100	8	TR	5	2/5.5	50 pF	SMALL OUTLINE	SOP20,.4	21.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V						12.8 mm	AHC/VHC/H/U/V
74LVC109DB	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS		2		3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	7.5 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	225 MHz	R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2.7 V			e4	30	260	6.2 mm	LVC/LCX/Z
74LVC377DB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8		2.7	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	7.9 ns	24 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1.2 V		WITH HOLD MODE	e4	30	260	7.2 mm	LVC/LCX/Z
HEF4042BT	NXP Semiconductors	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	260 ns	.36 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V		PROGRAMMABLE TRIGGER TYPE				9.9 mm	4000/14000/40000
74HCT73N	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		2		5		50 pF	IN-LINE		57 ns			2.54 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V		MASTER SLAVE OPERATION				19.025 mm	HCT
74LV107PW-T	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		33 ns			.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V		MASTER SLAVE OPERATION				5 mm	LV/LV-A/LVX/H
HEF4076BT,653	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5			SMALL OUTLINE		305 ns			1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	4 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm		TRUE	3 V		WITH HOLD MODE; WITH DUAL OUTPUT ENABLE				9.9 mm	4000/14000/40000
74HCT112NB	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		2		5		50 pF	IN-LINE		60 ns			2.54 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V						19.025 mm	HCT
74AUP1G79GM-H	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.8			SMALL OUTLINE, VERY THIN PROFILE		25.6 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	510 MHz	R-PDSO-N6		3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V						1.45 mm	AUP/ULP/V
HEF40175BT,652	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	5000000 Hz	CMOS		4		5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	160 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	5 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e4	30	260	9.9 mm	4000/14000/40000
74AHCT1G79GW	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		1		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	11 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	70 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	4.5 V			e3	30	260	2.05 mm	AHCT/VHCT

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.