NXP Semiconductors Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74HC259PW,118	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	255 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	5 mm	HC/UH
5962-8855001SX	NXP Semiconductors	D FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		TTL		8		5			FLATPACK		11 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		DUAL	95 MHz	R-GDFP-F20		5.5 V	2.286 mm	6.731 mm	Not Qualified	TRUE	4.5 V							F/FAST
74LV259PWDH-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		60 ns			.65 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V		1:8 DMUX FOLLOWED BY LATCH				5 mm	LV/LV-A/LVX/H
74HC259BQ-Q100	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		255 ns			.5 mm	125 Cel		LOW LEVEL	-40 Cel		QUAD		R-PQCC-N16	1	6 V	1 mm	2.5 mm		TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH				3.5 mm	HC/UH
74LVC74AD-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	120000000 Hz	CMOS	AEC-Q100	1	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.25	11.9 ns	24 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	120 MHz	R-PDSO-G14		3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1.2 V						8.65 mm	LVC/LCX/Z
74LV74D-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	48000000 Hz	CMOS	AEC-Q100	1	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.25	56 ns	6 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	56 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1 V						8.65 mm	LV/LV-A/LVX/H
74HC75PW,118	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns	4 Amp	FF/Latches	.65 mm	125 Cel		HIGH LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
HEF4042BTD-T	NXP Semiconductors	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE		260 ns			1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V		PROGRAMMABLE TRIGGER TYPE				9.9 mm	4000/14000/40000
74AHC377PW-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		20 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm		TRUE	2 V						6.5 mm	AHC/VHC/H/U/V
74LVC1G80GV	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	13 ns	24 Amp	FF/Latches	.95 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	200 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.5 mm	Not Qualified	INVERTED	1.65 V			e3	30	260	2.9 mm	LVC/LCX/Z
HEF40175BP,652	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	5000000 Hz	CMOS		4	BULK	5	5/15	50 pF	IN-LINE	DIP16,.3	160 ns		FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	5 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e4			21.6 mm	4000/14000/40000
74HCT74BQ-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	1		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		53 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD	18 MHz	R-PQCC-N14	1	5.5 V	1 mm	2.5 mm		COMPLEMENTARY	4.5 V						3 mm	HCT
74HC259DB-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5			SMALL OUTLINE, SHRINK PITCH		255 ns			.65 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4			6.2 mm	HC/UH
5962-9091001MSA	NXP Semiconductors	D FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		TTL	MIL-STD-883	8		5			FLATPACK		10.5 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	85 MHz	R-GDFP-F20		5.5 V	2.286 mm	6.731 mm	Not Qualified	TRUE	4.5 V		WITH HOLD MODE	e0				F/FAST
74HCT74D/S242,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		5			SMALL OUTLINE		53 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		COMPLEMENTARY	4.5 V			e4			8.65 mm	HCT
74LVC74ABQ	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	2	120000000 Hz	CMOS		1	TR	2.7	3.3	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	7.5 ns	24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	120 MHz	R-PQCC-N14	1	3.6 V	1 mm	2.5 mm	Not Qualified	COMPLEMENTARY	1.2 V			e4	30	260	3 mm	LVC/LCX/Z
74LVT74PWDH-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		BICMOS		1		3.3		50 pF	SMALL OUTLINE		5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G14		3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2.7 V	1 mA					5 mm	LVT
74LVC273PW,112	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS		8	TUBE	2.7	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	11.2 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1.2 V			e4	30	260	6.5 mm	LVC/LCX/Z
74HCT75N	NXP Semiconductors	D LATCH	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		2		5		50 pF	IN-LINE		45 ns			2.54 mm	125 Cel		HIGH LEVEL	-40 Cel		DUAL	60 MHz	R-PDIP-T16		5.5 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V						21.6 mm	HCT
HEF40174BPN	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	5000000 Hz	CMOS		6		5	5/15	50 pF	IN-LINE	DIP16,.3	155 ns	.36 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	5 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V			e3			21.6 mm	4000/14000/40000
74AHC273BQ,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		8	TR	5	2/5.5	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.1X.18,20	21.5 ns	8 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	100 MHz	R-PQCC-N20	1	5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V			e4	30	260	4.5 mm	AHC/VHC/H/U/V
74LV109N	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		2		3.3		50 pF	IN-LINE		70 ns			2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	77 MHz	R-PDIP-T16		3.6 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	1 V						19.025 mm	LV/LV-A/LVX/H
HEF4044BD	NXP Semiconductors	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		4		5	5/15	50 pF	IN-LINE	DIP16,.3	185 ns	.36 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel		DUAL		R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V							4000/14000/40000
74LVC1G80GN	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	SON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		3.3			SMALL OUTLINE		13 ns			.3 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-N6	1	5.5 V	.35 mm	.9 mm	Not Qualified	INVERTED	1.65 V			e3			1 mm	LVC/LCX/Z
74LVC377DB,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	2.7	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	7.9 ns	24 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1.2 V		WITH HOLD MODE	e4	30	260	7.2 mm	LVC/LCX/Z
74HCT74PW-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		53 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm		COMPLEMENTARY	4.5 V			e4			5 mm	HCT
74LVC273D-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		2.7			SMALL OUTLINE		11.2 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1.2 V			e4			12.8 mm	LVC/LCX/Z
74LVC2G74GT-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS			TR	3.3	3.3		SMALL OUTLINE	SOLCC8,.04,20		24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-N8					Not Qualified
74HC273PW	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	225 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G20	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	HC/UH
HEF4044BT,653	NXP Semiconductors	R-S LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	185 ns		FF/Latches	1.27 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e4	30	260	9.9 mm	4000/14000/40000
74AUP2G80GT-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	2	70000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,20	27.2 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e4			1.95 mm	AUP/ULP/V
74LVT273BQ	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.1X.18,20		64 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD		R-PQCC-N20	1	3.6 V	1 mm	2.5 mm	Not Qualified	TRUE	2.7 V				30	260	4.5 mm	LVT
74LV174PWDH-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		6		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		31 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V						5 mm	LV/LV-A/LVX/H
74HCT74PW	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	18000000 Hz	CMOS		1	TUBE	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	53 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	HCT
SSTVF16859BS,157	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	NO LEAD	56	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1				13		2.5	2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.31SQ,20	2.5 ns		Other Logic ICs	.5 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	210 MHz	S-PQCC-N56	1	2.7 V	1 mm	8 mm	Not Qualified	TRUE	2.3 V			e4	30	260	8 mm	SSTV
74AHC273PW-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	AEC-Q100	8	TR	5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	21.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V						6.5 mm	AHC/VHC/H/U/V
74HCT174DB,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	BULK	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	53 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e4	30	260	6.2 mm	HCT
74LVC1G79GW-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12.5 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V			e3			2.05 mm	LVC/LCX/Z
74HCT75PW	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		45 ns			.65 mm	125 Cel		HIGH LEVEL	-40 Cel		DUAL	60 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V						5 mm	HCT
HEF40174BP,652	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	5000000 Hz	CMOS		6		5	5/15	50 pF	IN-LINE	DIP16,.3	155 ns	.36 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	5 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V			e3			21.6 mm	4000/14000/40000
74HCT109N	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	18000000 Hz	CMOS		2		5	5	50 pF	IN-LINE	DIP16,.3	53 ns	6 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDIP-T16		5.5 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			21.6 mm	HCT
74LVC2G74GM	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS		1	TR	1.8	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC8,.06SQ,20	13.4 ns	24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	200 MHz	S-PQCC-N8	1	5.5 V	.5 mm	1.6 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4	30	260	1.6 mm	LVC/LCX/Z
HEF4043BD	NXP Semiconductors	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		4		5	5/15	50 pF	IN-LINE	DIP16,.3	180 ns	.36 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	HIGH LEVEL	-40 Cel		DUAL		R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V							4000/14000/40000
74AUP1G373GW-Q100	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		1.1			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		25.9 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G6	1	3.6 V	1.1 mm	1.25 mm		TRUE	.8 V			e3	30	260	2 mm	AUP/ULP/V
HEF4044BDF	NXP Semiconductors	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		4		5		50 pF	IN-LINE		185 ns			2.54 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel		DUAL		R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V							4000/14000/40000
74HCT75NB	NXP Semiconductors	D LATCH	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		2		5		50 pF	IN-LINE		45 ns			2.54 mm	125 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V						19.025 mm	HCT
74LV74N,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	48000000 Hz	CMOS		1	BULK	3.3	3.3	50 pF	IN-LINE	DIP14,.3	33 ns	6 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	48 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	1 V			e4			19.025 mm	LV/LV-A/LVX/H
74LVC109D	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS		2		3.3	3.3	50 pF	SMALL OUTLINE	SOP16,.25	7.5 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	225 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.7 V			e4	30	260	9.9 mm	LVC/LCX/Z

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.