NXP Semiconductors Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
HEF4044BP,652	NXP Semiconductors	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4	BULK	5	5/15	50 pF	IN-LINE	DIP16,.3	185 ns		FF/Latches	2.54 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V			e4			21.6 mm	4000/14000/40000
HEF4724BPN	NXP Semiconductors	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		1		5		50 pF	IN-LINE		230 ns			2.54 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				21.6 mm	4000/14000/40000
74AHCT259D-Q100J	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	13 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V						9.9 mm	AHCT/VHCT/VT
74HC109DB,112	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2	BULK	4.5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	265 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	6.2 mm	HC/UH
74AUP2G80GD,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	2	70000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.11,20	27.2 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.5 mm	2 mm	Not Qualified	TRUE	.8 V			e4	30	260	3 mm	AUP/ULP/V
74HCT109PW	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	18000000 Hz	CMOS		2		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	53 ns	6 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	HCT
74HCT377U	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD		DIE	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		8		5			UNCASED CHIP		48 ns				125 Cel		POSITIVE EDGE	-40 Cel		UPPER	18 MHz	R-XUUC-N	NOT APPLICABLE	5.5 V			Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED		HCT
74HCT174N	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		6		5	2/6	50 pF	IN-LINE	DIP16,.3	53 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		5.5 V	4.7 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e4			21.6 mm	HCT
SSTV16859EC-T	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1				13		2.5			GRID ARRAY, LOW PROFILE, FINE PITCH		2.8 ns			.8 mm	70 Cel		POSITIVE EDGE	0 Cel		BOTTOM	200 MHz	R-PBGA-B96		2.7 V	1.5 mm	5.5 mm	Not Qualified	TRUE	2.3 V						13.5 mm	SSTV
74HCT273PW,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	BULK	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	45 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4	30	260	6.5 mm	HCT
74HC73PW	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	240 ns	4 Amp	FF/Latches	.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V		MASTER SLAVE OPERATION	e4	30	260	5 mm	HC/UH
74AHCT1G79GW,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		11 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	70 MHz	R-PDSO-G5		5.5 V	1.1 mm	1.25 mm		TRUE	4.5 V			e3			2.05 mm	AHC/VHC/H/U/V
74HC175PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		4.5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		265 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4			5 mm	HC/UH
74LV175D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		3.3		50 pF	SMALL OUTLINE		45 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1 V						9.9 mm	LV/LV-A/LVX/H
74AUP2G80DC-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	70000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	27.2 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	510 MHz	R-PDSO-G8	1	3.6 V	1 mm	2 mm	Not Qualified	TRUE	.8 V			e4			2.3 mm	AUP/ULP/V
74LVC109D-T	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		3.3		50 pF	SMALL OUTLINE		7.5 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	225 MHz	R-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.7 V			e4			9.9 mm	LVC/LCX/Z
74LV259DB-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	60 ns	6 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V		1:8 DMUX FOLLOWED BY LATCH	e4			6.2 mm	LV/LV-A/LVX/H
74LVC1G74GD-Q100H	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS	AEC-Q100	1	TR	1.8	3.3		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.11,20	13.4 ns	24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-N8		5.5 V	.5 mm	2 mm	Not Qualified	COMPLEMENTARY	1.65 V		SEATED HGT-NOM				3 mm	LVC/LCX/Z
74HC75DB	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	190 ns	4 Amp	FF/Latches	.65 mm	125 Cel		HIGH LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	6.2 mm	HC/UH
74HCT73D-T	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE		57 ns			1.27 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V		MASTER SLAVE OPERATION				8.65 mm	HCT
74HC259D-Q100	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		5			SMALL OUTLINE		255 ns			1.27 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH				9.9 mm	HC/UH
74AUP1G80GW	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	27.2 ns	1.7 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	510 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	.8 V			e3	30	260	2.05 mm	AUP/ULP/V
74HC377DB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8		5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	48 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G20	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE	e4	30	260	7.2 mm	HC/UH
74HCT259DB,118	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	57 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	6.2 mm	HCT
5962-89724012A	NXP Semiconductors	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	UNSPECIFIED	YES	1		TTL	MIL-STD-883	8		5			CHIP CARRIER		9.5 ns				125 Cel	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD	110 MHz	S-XQCC-N20		5.5 V			Not Qualified	TRUE	4.5 V			e0				F/FAST
74AUP2G79GF	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		1.1			SMALL OUTLINE, VERY THIN PROFILE		25.6 ns			.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e3			1.35 mm	AUP/ULP/V
74HCT174D,652	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	BULK	5	5	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e4	30	260	9.9 mm	HCT
74HCT74PW,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	18000000 Hz	CMOS		1	TUBE	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	53 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	HCT
74AHCT74BQ-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	1		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		11 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD	80 MHz	R-PQCC-N14	1	5.5 V	1 mm	2.5 mm		COMPLEMENTARY	4.5 V						3 mm	AHCT/VHCT/VT
5962-3801701BFX	NXP Semiconductors	D FLIP-FLOP	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	1		TTL		6		5			FLATPACK		43 ns				125 Cel		POSITIVE EDGE	-55 Cel		DUAL	25 MHz	R-GDFP-F16		5.5 V			Not Qualified	TRUE	4.5 V							TTL/H/L
74AHC259PW-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS		1	TR	5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			5 mm	AHC
74HC74N-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	AEC-Q100	1		5			IN-LINE		265 ns			2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDIP-T14		6 V	4.2 mm	7.62 mm		COMPLEMENTARY	2 V						19.025 mm	HC/UH
HEF40174BDF	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		6		5		50 pF	IN-LINE		155 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	5 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V							4000/14000/40000
74AUP2G80GS	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		1.1			SMALL OUTLINE, VERY THIN PROFILE		27.2 ns			.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.35 mm	1 mm	Not Qualified	INVERTED	.8 V			e3			1.35 mm	AUP/ULP/V
74LV377N,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		8		3.3	3.3	50 pF	IN-LINE	DIP20,.3	36 ns	8 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T20		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	1 V		WITH HOLD MODE	e4			26.73 mm	LV/LV-A/LVX/H
5962-3834102B2X	NXP Semiconductors	J-KBAR FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL		2		5			CHIP CARRIER		10.5 ns				125 Cel		POSITIVE EDGE	-55 Cel		QUAD	70 MHz	S-CQCC-N20		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V							F/FAST
74AHCT377D	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	13.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	12.8 mm	AHCT/VHCT
74AUP1G175GM,132	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	21 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	410 MHz	R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e3	30	260	1.45 mm	AUP/ULP/V
74AUP2G80GM,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VQCCN	SQUARE	PLASTIC/EPOXY	YES	2	70000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	27.2 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	510 MHz	S-PQCC-N8	1	3.6 V	.5 mm	1.6 mm	Not Qualified	TRUE	.8 V			e4	30	260	1.6 mm	AUP/ULP/V
74HCT73NB	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		2		5		50 pF	IN-LINE		57 ns			2.54 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V		MASTER SLAVE OPERATION				19.025 mm	HCT
74HC107DB-T	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE, SHRINK PITCH		48 ns			.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4			6.2 mm	HC/UH
SSTVF16859DGG,512	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				13		2.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.5 ns			.5 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	210 MHz	R-PDSO-G64		2.7 V	1.2 mm	6.1 mm		TRUE	2.3 V			e4			17 mm	SSTV
74HC112NB	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		2		5		50 pF	IN-LINE		53 ns			2.54 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		6 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V						19.025 mm	HC/UH
74HC377DB,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	TUBE	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	48 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G20	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE	e4	30	260	7.2 mm	HC/UH
74AUP1G175GW-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS			TR		1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08		1.7 Amp	FF/Latches	.635 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G6					Not Qualified
74HCT109D,652	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	18000000 Hz	CMOS		2	BULK	5	5	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	6 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	18 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	9.9 mm	HCT
74LVC377PWDH-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		2.7			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		11.2 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	230 MHz	R-PDSO-G20		3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1.2 V		WITH HOLD MODE				6.5 mm	LVC/LCX/Z
74LVC273D,118	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS		8	TR	2.7	3.3	50 pF	SMALL OUTLINE	SOP20,.4	11.2 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1.2 V			e4	30	260	12.8 mm	LVC/LCX/Z

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.