NXP Semiconductors Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74HC112N,652	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS		2		4.5	2/6	50 pF	IN-LINE	DIP16,.3	265 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V			e4			21.6 mm	HC/UH
74HC175D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		4.5		50 pF	SMALL OUTLINE		265 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	HC/UH
SSTV16859BS,151	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	NO LEAD	56	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1				13		2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.8 ns			.5 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	200 MHz	S-PQCC-N56		2.7 V	1 mm	8 mm	Not Qualified	TRUE	2.3 V						8 mm	SSTV
74HCT377DB-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		5			SMALL OUTLINE, SHRINK PITCH		48 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm		TRUE	4.5 V						7.2 mm	HCT
74HC175DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		4.5		50 pF	SMALL OUTLINE, SHRINK PITCH		265 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4			6.2 mm	HC/UH
74HCT174PW-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	6		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		53 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V						5 mm	HCT
74LV174D,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP16,.25	31 ns	6 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1 V			e4	30	260	9.9 mm	LV/LV-A/LVX/H
74HCT74N,652	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	18000000 Hz	CMOS		1	TUBE	5	5	50 pF	IN-LINE	DIP14,.3	53 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			19.025 mm	HCT
74LV377DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3.3		50 pF	SMALL OUTLINE, SHRINK PITCH		36 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V		WITH HOLD MODE	e4			7.2 mm	LV/LV-A/LVX/H
74HCT174NB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		6		5		50 pF	IN-LINE		53 ns			2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V						19.025 mm	HCT
HEF4043BTD	NXP Semiconductors	R-S LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	BULK	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	180 ns		FF/Latches	1.27 mm	85 Cel	3-STATE	HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V				40	260	9.9 mm	4000/14000/40000
HEF40174BTD	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	5000000 Hz	CMOS		6		5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	155 ns	.36 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	5 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e4		260	9.9 mm	4000/14000/40000
74AUP1G374GM-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	21.6 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN	DUAL	360 MHz	R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e3			1.45 mm	AUP/ULP/V
74AHC259PW-Q100	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		19 ns			.65 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.1 mm	4.4 mm		TRUE	2 V						5 mm	AHC/VHC/H/U/V
74LVT273PW-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	5.9 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2.7 V	12 mA		e4		260	6.5 mm	LVT
SSTV16859EC,518	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1				13		2.5			GRID ARRAY, LOW PROFILE, FINE PITCH		2.8 ns			.8 mm	70 Cel		POSITIVE EDGE	0 Cel		BOTTOM	200 MHz	R-PBGA-B96		2.7 V	1.5 mm	5.5 mm	Not Qualified	TRUE	2.3 V				NOT SPECIFIED	NOT SPECIFIED	13.5 mm	SSTV
74HCT7273D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			SMALL OUTLINE					1.27 mm	125 Cel	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4			12.8 mm	HCT
SSTVF16857DGV,112	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				14		2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.25,16	2.6 ns		Other Logic ICs	.4 mm	70 Cel		POSITIVE EDGE	0 Cel	Tin (Sn)	DUAL	210 MHz	R-PDSO-G48	1	2.7 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2.3 V			e3	30	260	9.7 mm	SSTV
74AHCT273BQ-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		11.5 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD	65 MHz	R-PQCC-N20	1	5.5 V	1 mm	2.5 mm		TRUE	4.5 V						4.5 mm	AHCT/VHCT/VT
74AHC273BQ-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8		5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		21.5 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD	100 MHz	R-PQCC-N20	1	5.5 V	1 mm	2.5 mm		TRUE	2 V						4.5 mm	AHC/VHC/H/U/V
74HCT377PW,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	48 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		WITH HOLD MODE	e4	30	260	6.5 mm	HCT
74HC273NB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8		5		50 pF	IN-LINE		45 ns			2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T20		6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	2 V						26.73 mm	HC/UH
74LV259DB	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	60 ns	6 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	6.2 mm	LV/LV-A/LVX/H
74HC112PW	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		4.5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns	4 Amp	FF/Latches	.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
74AHC1G79GW,165	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		15.5 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	70 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	2 V			e3			2.05 mm	AHC/VHC/H/U/V
74HCT174DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		6		5		50 pF	SMALL OUTLINE, SHRINK PITCH		53 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e4			6.2 mm	HCT
74AHCT74D,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS		1	TUBE	5	5	50 pF	SMALL OUTLINE	SOP14,.25	11 ns	8 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	8.65 mm	AHCT/VHCT
74HCT173PW	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		60 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		WITH HOLD MODE				5 mm	HCT
74LVT74PW,112	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	BICMOS		1		3.3	3.3	50 pF	SMALL OUTLINE	TSSOP14,.25	5 ns	32 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2.7 V	1 mA		e4	30	260	5 mm	LVT
74LVTH16374ABX,518	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL		60			PLASTIC/EPOXY	YES	16	150000000 Hz	CMOS				3.3	3.3	50 pF		SLGA60,8X12,20		64 Amp	FF/Latches		85 Cel	3-STATE	POSITIVE EDGE	-40 Cel					2				Not Qualified						30	260
74LV377PW	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	36 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V		WITH HOLD MODE	e4	30	260	6.5 mm	LV/LV-A/LVX/H
74HCT75DB	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE, SHRINK PITCH		45 ns			.65 mm	125 Cel		HIGH LEVEL	-40 Cel		DUAL	60 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V						6.2 mm	HCT
74AHC273BQ-Q100X	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	AEC-Q100	8	TR	5	2/5.5	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.1X.18,20	21.5 ns	8 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD	100 MHz	R-PQCC-N20		5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V						4.5 mm	AHC/VHC/H/U/V
74AHC259D-Q100J	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1	TR	5	2/5.5	50 pF	SMALL OUTLINE	SOP16,.25	19 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V						9.9 mm	AHC/VHC/H/U/V
74LV107PWDH-T	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		33 ns			.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V						5 mm	LV/LV-A/LVX/H
5962-9060602EA	NXP Semiconductors	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		TTL	MIL-STD-883	2		5			IN-LINE		7.5 ns				125 Cel		NEGATIVE EDGE	-55 Cel	TIN LEAD	DUAL	90 MHz	R-GDIP-T16		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V			e0				F/FAST
74HC107D-Q100J	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	2		5			SMALL OUTLINE		240 ns			1.27 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G14		6 V	1.75 mm	3.9 mm		COMPLEMENTARY	2 V						8.65 mm	HC/UH
74HCT75U	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD		DIE	RECTANGULAR	UNSPECIFIED	YES	2		CMOS		2		5			UNCASED CHIP		45 ns				125 Cel		HIGH LEVEL	-40 Cel		UPPER		R-XUUC-N		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V							HCT
SSTV16859EC	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		13		2.5	2.5,2.5/3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,32	2.8 ns		Other Logic ICs	.8 mm	70 Cel		POSITIVE EDGE	0 Cel	Tin/Lead (Sn63Pb37)	BOTTOM	200 MHz	R-PBGA-B96		2.7 V	1.5 mm	5.5 mm	Not Qualified	TRUE	2.3 V			e0			13.5 mm	SSTV
74AHC259PW,118	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS		1	TR	5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	5 mm	AHC
74HC112DB,112	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		4.5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	265 ns	4 Amp	FF/Latches	.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	6.2 mm	HC/UH
74AUP1G74GN,115	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE	SOLCC8,.04,12	23.3 ns	1.7 Amp	FF/Latches	.3 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	R-PDSO-N8	1	3.6 V	.35 mm	1 mm	Not Qualified	COMPLEMENTARY	.8 V			e3	30	260	1.2 mm	AUP/ULP/V
74LV74N	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	48000000 Hz	CMOS		1		3.3	3.3	50 pF	IN-LINE	DIP14,.3	33 ns	12 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	48 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	1 V			e4			19.025 mm	LV/LV-A/LVX/H
74AHCT74D-Q100	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	1		5			SMALL OUTLINE		11 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm		COMPLEMENTARY	4.5 V						8.65 mm	AHCT/VHCT/VT
74HC75D,652	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	190 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		HIGH LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	HC/UH
74HCT75DB-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE, SHRINK PITCH		45 ns			.65 mm	125 Cel		HIGH LEVEL	-40 Cel		DUAL	60 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V						6.2 mm	HCT
74HC74BQ	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	TR	5	2/6	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	265 ns	4 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	24 MHz	R-PQCC-N14	1	6 V	1 mm	2.5 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	3 mm	HC/UH
74AUP2G79DC-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	70000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	25.6 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	510 MHz	R-PDSO-G8	1	3.6 V	1 mm	2 mm	Not Qualified	TRUE	.8 V			e4			2.3 mm	AUP/ULP/V

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.