NXP Semiconductors Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74AUP2G79GM,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VQCCN	SQUARE	PLASTIC/EPOXY	YES	2	70000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	25.6 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	510 MHz	S-PQCC-N8	1	3.6 V	.5 mm	1.6 mm	Not Qualified	TRUE	.8 V			e4	30	260	1.6 mm	AUP/ULP/V
74HC175PW-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	4		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		265 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm		COMPLEMENTARY	2 V						5 mm	HC/UH
HEF4724BTD	NXP Semiconductors	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5		50 pF	SMALL OUTLINE		230 ns			1.27 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				9.9 mm	4000/14000/40000
74LV174PWDH	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		6		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		31 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V						5 mm	LV/LV-A/LVX/H
74HC173PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		53 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE	e4			5 mm	HC/UH
74AHC259D-Q100	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		5			SMALL OUTLINE		19 ns			1.27 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		TRUE	2 V						9.9 mm	AHC/VHC/H/U/V
HEF4027BT-Q100,118	NXP Semiconductors	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	2		5			SMALL OUTLINE		210 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	15 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm		COMPLEMENTARY	3 V						9.9 mm	4000/14000/40000
74HC75NB	NXP Semiconductors	D LATCH	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		2		5		50 pF	IN-LINE		38 ns			2.54 mm	125 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDIP-T16		6 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V						19.025 mm	HC/UH
74AHC377-Q100	NXP Semiconductors	D FLIP-FLOP											AEC-Q100
74LVT74D,112	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	BICMOS		1		3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.25	5 ns	32 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.7 V	1 mA		e4	30	260	8.65 mm	LVT
74HCT259DB	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	57 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	6.2 mm	HCT
74LV174DB-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	TR	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	31 ns	6 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V			e4	30	260	5 mm	LV/LV-A/LVX/H
74LV259BQ-G	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	16	QCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TUBE	3.3	3.3	50 pF	CHIP CARRIER	LCC16,.1X.14,20		6 Amp	FF/Latches	.5 mm	125 Cel			-40 Cel		QUAD		R-PQCC-N16					Not Qualified
74LVC259DB-T	NXP Semiconductors	D LATCH	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		3.3			SMALL OUTLINE, SHRINK PITCH		5.8 ns			.65 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1.2 V		1:8 DMUX FOLLOWED BY LATCH				6.2 mm	LVC/LCX/Z
74HCT273D	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	45 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.8 mm	HCT
74HCT377D,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			SMALL OUTLINE		48 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm		TRUE	4.5 V		WITH HOLD MODE				12.8 mm	HCT
74LVC259D	NXP Semiconductors	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		3.3			SMALL OUTLINE		5.8 ns				85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		3.6 V			Not Qualified	TRUE	1.2 V		1:8 DMUX FOLLOWED BY LATCH					LVC/LCX/Z
74HC74DB,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	TUBE	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	265 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	6.2 mm	HC/UH
74AHCT74PW-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS	AEC-Q100	1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	11 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V						5 mm	AHCT/VHCT/VT
74LV175PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		3.3		50 pF	SMALL OUTLINE		45 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V						5 mm	LV/LV-A/LVX/H
74LV259PW	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	60 ns	6 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	5 mm	LV/LV-A/LVX/H
74HC273DB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8		5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	225 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G20	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	7.2 mm	HC/UH
74AHCT74PW/T3	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			5 mm	AHCT/VHCT/VT
74AHCT259D,118	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	12 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e4	30	260	9.9 mm	AHCT/VHCT
74LVC273DB-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		2.7			SMALL OUTLINE, SHRINK PITCH		11.2 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1.2 V			e4			7.2 mm	LVC/LCX/Z
74HC74DB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	TUBE	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	265 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	6.2 mm	HC/UH
74HCT175PW,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	17000000 Hz	CMOS		4	BULK	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	50 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	HCT
74LVC377PWDH	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		2.7			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		11.2 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	230 MHz	R-PDSO-G20		3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1.2 V		WITH HOLD MODE				6.5 mm	LVC/LCX/Z
74HCT259D,653	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	59 ns	.02 Amp	FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	9.9 mm	HCT
74HC73D	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	240 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		MASTER SLAVE OPERATION	e4	30	260	8.65 mm	HC/UH
SSTV16857DGV,112	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				14		2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.25,16	2.8 ns		Other Logic ICs	.4 mm	70 Cel		POSITIVE EDGE	0 Cel	Tin (Sn)	DUAL	200 MHz	R-PDSO-G48	1	2.7 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2.3 V			e3	30	260	9.7 mm	SSTV
74HCT173DB,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE, SHRINK PITCH		60 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		WITH HOLD MODE	e4			6.2 mm	HCT
74HCT112PW	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	60 ns	4 Amp	FF/Latches	.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	HCT
74HCT273U	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD		DIE	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		8		5			UNCASED CHIP		45 ns				125 Cel		POSITIVE EDGE	-40 Cel		UPPER	20 MHz	R-XUUC-N		5.5 V			Not Qualified	TRUE	4.5 V							HCT
74AHC74PW,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		1	TUBE	5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	19.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	AHC
74LV74PWDH-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		33 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	48 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V						5 mm	LV/LV-A/LVX/H
74LVC1G80GS,132	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1	TR	3.3	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	13 ns	24 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	S-PDSO-N6	1	5.5 V	.35 mm	1 mm	Not Qualified	INVERTED	1.65 V			e3	30	260	1 mm	LVC/LCX/Z
HEF4724BTD-T	NXP Semiconductors	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5		50 pF	SMALL OUTLINE		230 ns			1.27 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				9.9 mm	4000/14000/40000
74HCT109D-Q100	NXP Semiconductors	J-KBAR FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	AEC-Q100	2		5			SMALL OUTLINE		53 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		COMPLEMENTARY	4.5 V						9.9 mm	HCT
74HCT259DB,112	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	57 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	6.2 mm	HCT
74AHCT1G79GW-Q100,125	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		11 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G5		5.5 V	1.1 mm	1.25 mm		TRUE	4.5 V						2.05 mm	AHCT/VHCT/VT
74AHCT377PW,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	13.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	6.5 mm	AHCT/VHCT
74HC173D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		4	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	6 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE	e4	30	260	9.9 mm	HC/UH
74LV377D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3.3		50 pF	SMALL OUTLINE		36 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	1 V		WITH HOLD MODE	e4			12.8 mm	LV/LV-A/LVX/H
74LV174N,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		6		3.3	3.3	50 pF	IN-LINE	DIP16,.3	31 ns	6 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	1 V			e4			19.025 mm	LV/LV-A/LVX/H
74LVC1G74GS	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.8			SMALL OUTLINE, VERY THIN PROFILE		13.4 ns			.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-N8	1	5.5 V	.35 mm	1 mm	Not Qualified	COMPLEMENTARY	1.65 V			e3			1.35 mm	LVC/LCX/Z
74AHCT74PWDH	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		10.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V						5 mm	AHCT/VHCT
74HCT107D,652	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	24000000 Hz	CMOS		2		5	5	50 pF	SMALL OUTLINE	SOP14,.25	54 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	8.65 mm	HCT

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.