NXP Semiconductors Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74LVC2G74GF	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.8			SMALL OUTLINE, VERY THIN PROFILE		13.4 ns			.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	R-PDSO-N8	1	5.5 V	.5 mm	1 mm	Not Qualified	COMPLEMENTARY	1.65 V			e3			1.35 mm	LVC/LCX/Z
74HC173D	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		4		5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	6 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE	e4	30	260	9.9 mm	HC/UH
HEF4042BT-T	NXP Semiconductors	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE		260 ns			1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V		PROGRAMMABLE TRIGGER TYPE				9.9 mm	4000/14000/40000
74HCT73PW-T	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		57 ns			.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V		MASTER SLAVE OPERATION				5 mm	HCT
74LVC109DB-T	NXP Semiconductors	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		3.3		50 pF	SMALL OUTLINE, SHRINK PITCH		7.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	225 MHz	R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2.7 V			e4			6.2 mm	LVC/LCX/Z
74AHCT273PW,118	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	11.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	65 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4	30	260	6.5 mm	AHCT/VHCT
74HCT174PW	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		6		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	53 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4	30	260	5 mm	HCT
74AHC74D	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		1	TUBE	5	2/5.5	50 pF	SMALL OUTLINE	SOP14,.25	19.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	8.65 mm	AHC
74HC75PW-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		190 ns			.65 mm	125 Cel		HIGH LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4			5 mm	HC/UH
74HCT112DB	NXP Semiconductors	J-K FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2		5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	60 ns	4 Amp	FF/Latches	.65 mm	125 Cel		NEGATIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	6.2 mm	HCT
HEF4044BPB	NXP Semiconductors	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4		5		50 pF	IN-LINE		185 ns			2.54 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V						21.6 mm	4000/14000/40000
74HC174DB	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		6		5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	50 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	6.2 mm	HC/UH
74HC259PW-Q100	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		255 ns			.65 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16	1	6 V	1.1 mm	4.4 mm		TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH				5 mm	HC/UH
74LV174D	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6		3.3	3.3	50 pF	SMALL OUTLINE	SOP16,.25	31 ns	6 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1 V			e4	30	260	9.9 mm	LV/LV-A/LVX/H
74LVT273D,118	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS		8	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.4	5.9 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2.7 V	12 mA		e4	30	260	12.8 mm	LVT
74HCT259NB	NXP Semiconductors	D LATCH	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		1		5		50 pF	IN-LINE		57 ns			2.54 mm	125 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		5.5 V	4.06 mm	7.62 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				19.09 mm	HCT
74HCT259DB-T	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5			SMALL OUTLINE, SHRINK PITCH		57 ns			.65 mm	125 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	60 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e4			6.2 mm	HCT
74HCT173PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		60 ns			.65 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		WITH HOLD MODE				5 mm	HCT
HEF4013BTD-T	NXP Semiconductors	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	7000000 Hz	CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE	SOP14,.25	220 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G14		15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e4			8.65 mm	4000/14000/40000
74AHCT273D,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	11.5 ns	8 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	65 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.8 mm	AHCT/VHCT
74HC75U	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD		DIE	RECTANGULAR	UNSPECIFIED	YES	2		CMOS		2		5			UNCASED CHIP		190 ns				125 Cel		HIGH LEVEL	-40 Cel		UPPER		R-XUUC-N		6 V			Not Qualified	COMPLEMENTARY	2 V							HC/UH
74AUP1G373GF,132	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	25.9 ns	1.7 Amp	FF/Latches	.35 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e3	30	260	1 mm	AUP/ULP/V
74LVC1G175GF,132	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS		1	TR	2.7	3.3	50 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	17 ns	24 Amp	FF/Latches	.35 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	200 MHz	S-PDSO-N6	1	5.5 V	.5 mm	1 mm	Not Qualified	TRUE	1.65 V			e3	30	260	1 mm	LVC/LCX/Z
74AUP1G373GM	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	25.9 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL		R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e3	30	260	1.45 mm	AUP/ULP/V
74HCT7273D	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		5	5	50 pF	SMALL OUTLINE	SOP20,.4		4 Amp	FF/Latches	1.27 mm	125 Cel	OPEN-DRAIN	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	12.8 mm	HCT
74AUP1G79GX	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	5	HVSON	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		1		1.1			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE		25.6 ns			.48 mm	125 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	510 MHz	S-PDSO-N5	1	3.6 V	.35 mm	.8 mm		TRUE	.8 V			e3			.8 mm	AUP/ULP/V
74HC273BQ	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8		5	2/6	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20/24,.14X.18,20	225 ns	4 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	24 MHz	R-PQCC-N20	1	6 V	1 mm	2.5 mm	Not Qualified	TRUE	2 V			e4	30	260	4.5 mm	HC/UH
74HCT259BQ-Q100,11	NXP Semiconductors	D LATCH	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1	TR	5	5	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	57 ns		FF/Latches	.5 mm	125 Cel		LOW LEVEL	-40 Cel		QUAD		R-PQCC-N16		5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH				3.5 mm	HCT
74LVC74APW-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	120000000 Hz	CMOS	AEC-Q100	1	TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	11.9 ns	24 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	120 MHz	R-PDSO-G14		3.6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1.2 V						5 mm	LVC/LCX/Z
74HCT273BQ	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	20	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		5	5	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20/24,.14X.18,20	45 ns	4 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	20 MHz	R-PQCC-N20	1	5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	4.5 V			e4	30	260	4.5 mm	HCT
5962-9091001MRA	NXP Semiconductors	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL	MIL-STD-883	8		5			IN-LINE		10.5 ns			2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	85 MHz	R-GDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		WITH HOLD MODE	e0			24.51 mm	F/FAST
74HC174PW	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		6		5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	50 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	5 mm	HC/UH
74HC174PW-Q100J	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	AEC-Q100	6	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	250 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V						5 mm	HC/UH
74LVC2G74GM-G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	8	QCCN	SQUARE	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS			TR	3.3	3.3		CHIP CARRIER	LCC8,.06SQ,20		24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-N8					Not Qualified
74AHCT377-Q100	NXP Semiconductors	D FLIP-FLOP											AEC-Q100
74HC259DB,112	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	255 ns	4 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	6.2 mm	HC/UH
74AHC259PW,112	NXP Semiconductors	D LATCH	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS		1	TUBE	5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.5 ns	8 Amp	FF/Latches	.65 mm	125 Cel		LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	5 mm	AHC
74AHC273PWDH	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		21.5 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			6.5 mm	AHC
74AUP1G374GM,132	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	21.6 ns	1.7 Amp	FF/Latches	.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	360 MHz	R-PDSO-N6	1	3.6 V	.5 mm	1 mm	Not Qualified	TRUE	.8 V			e3	30	260	1.45 mm	AUP/ULP/V
74LV74PWDH	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		33 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	48 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V						5 mm	LV/LV-A/LVX/H
HEF4013BP,653	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		1		5			IN-LINE		220 ns			2.54 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T14		15 V	4.2 mm	7.62 mm		COMPLEMENTARY	3 V						19.025 mm	4000/14000/40000
74HC175PW,112	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		4	BULK	4.5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	265 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
74LVC2G74DC/G	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	175000000 Hz	CMOS			TR	3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20		24 Amp	FF/Latches	.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G8					Not Qualified
74HC273PW-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		225 ns			.65 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G20	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			6.5 mm	HC/UH
74AUP1G74GX	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	BUTT	8	HVBCC	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		1.1			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		23.3 ns				125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	BOTTOM	510 MHz	R-PBCC-B8	1	3.6 V	.35 mm	.8 mm		COMPLEMENTARY	.8 V			e4	30	260	1.35 mm	AUP/ULP/V
SSTV16859BS,118	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	NO LEAD	56	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1				13		2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.8 ns			.5 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	200 MHz	S-PQCC-N56		2.7 V	1 mm	8 mm	Not Qualified	TRUE	2.3 V				40	260	8 mm	SSTV
5962-9314801MRA	NXP Semiconductors	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		BICMOS	MIL-STD-883	8		5			IN-LINE		7.6 ns				125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	150 MHz	R-GDIP-T20		5.5 V			Not Qualified	TRUE	4.5 V			e0				ABT
74HCT175D-T	NXP Semiconductors	D FLIP-FLOP	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE		50 ns			1.27 mm	125 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	17 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			9.9 mm	HCT

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.