Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MM74HC273SJX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	21000000 Hz	CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP20,.3	170 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	24 MHz	R-PDSO-G20	1	6 V	2.1 mm	5.3 mm	Not Qualified	TRUE	2 V	.16 mA		e3	30	260	12.6 mm	HC/UH
MC100EP131MNG	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1	3000000000 Hz	ECL	4	TRAY	3.3	-4.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.6 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	QUAD		S-XQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V	130 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
MC100EP52DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL	1	TUBE	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
MC14174BCPG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	2000000 Hz	CMOS	6	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	400 ns		FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	6.5 MHz	R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	TRUE	3 V			e3		260	19.175 mm	4000/14000/40000
MC14175BDG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	4		5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	400 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	6.5 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e3	30	260	9.9 mm	4000/14000/40000
MC74HC112ADR2G	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS	2	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25		4 Amp	FF/Latches	1.27 mm	125 Cel			NEGATIVE EDGE	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	9.9 mm	HC/UH
MC74HC174ANG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS	6	RAIL	5	2/6	50 pF	IN-LINE	DIP16,.3	165 ns	4 Amp	FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	24 MHz	R-PDIP-T16		6 V	4.44 mm	7.62 mm	Not Qualified	TRUE	2 V			e3	40	260	19.175 mm	HC/UH
NC7SZ74L8X-L22185	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	1	175000000 Hz	CMOS	1	TR	1.8	3.3	15 pF	CHIP CARRIER	LCC8,.06SQ,20	13 ns	32 Amp	FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	250 MHz	S-XQCC-N8	1	5.5 V	.55 mm	1.6 mm	Not Qualified	COMPLEMENTARY	1.65 V	50 mA		e4	NOT SPECIFIED	NOT SPECIFIED	1.6 mm	LVC/LCX/Z
NC7SZ74L8X_F113	Onsemi	D FLIP-FLOP		NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	1		CMOS	1	TR	1.8		50 pF	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	13 ns	32 Amp		.5 mm	85 Cel			POSITIVE EDGE	-40 Cel		QUAD		S-XQCC-N8		5.5 V	.55 mm	1.6 mm		COMPLEMENTARY	1.65 V	50 mA					1.6 mm	LVC/LCX/Z
74VHC175SJX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS	4	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP16,.3	17 ns	8 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	2.1 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	10.2 mm	AHC/VHC
74VHC74MTCX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	17.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	AHC/VHC/H/U/V
NC7SZ175P6	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS	1		1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	16.5 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	175 MHz	R-PDSO-G6	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	TRUE	1.65 V			e3	30	260	2 mm	LVC/LCX/Z
74LCX112MTCX	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS	2	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	9 ns	24 Amp	FF/Latches	.65 mm	85 Cel			NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	LVC/LCX/Z
74LVX273MTC	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	8		2.7	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	24 ns	4 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	LV/LV-A/LVX/H
MC100E151FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL	6		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.9 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	900 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	100E
MC10EP51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	1	RAIL	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.37 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	10E
MC10EP52MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	4000000000 Hz	ECL	1	TR	3.3	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.38 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	DUAL		S-XDSO-N8	1	5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V		30	260	2 mm	10E
MC74ACT259DG	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1	RAIL	5	5	50 pF	SMALL OUTLINE	SOP16,.25	12.5 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			LOW LEVEL	-40 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e3	30	260	9.9 mm	ACT
MC74HC175ADG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	20000000 Hz	CMOS	1	RAIL	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	225 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	9.9 mm	HC/UH
MC74HCT74ANG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS	1	RAIL	5	5	50 pF	IN-LINE	DIP14,.3	36 ns	4 Amp	FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	20 MHz	R-PDIP-T14		5.5 V	4.69 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e3		260	18.86 mm	HCT
MC74LCX74DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS	1	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP14,.25	8.4 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	8.65 mm	LVC/LCX/Z
74VHC74SJX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.3	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	2.1 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	10.2 mm	AHC/VHC/H/U/V
MC14043BCP	Onsemi	R-S LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	4	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	350 ns		FF/Latches	2.54 mm	125 Cel		3-STATE	HIGH LEVEL	-55 Cel	Tin/Lead (Sn80Pb20)	DUAL		R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	TRUE	3 V			e0	30	235	19.175 mm	4000/14000/40000
MC74VHC74DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.25	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	8.65 mm	AHC/VHC
NC7SV74K8X	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS	1	TR	1.1	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	9.9 ns	2 Amp	FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	250 MHz	R-PDSO-G8	1	3.6 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	.9 V			e3	30	260	2.3 mm	AUP/ULP/V
74VHC74MTC	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	RAIL	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	17.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	AHC/VHC/H/U/V
MC100E143FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	9		5			CHIP CARRIER		1 ns			1.27 mm	85 Cel			POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100EL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL	1	TUBE	5	-4.5		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC100EP451FA	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	6		3.3	-4.5		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.55 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn80Pb20)	QUAD		S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0	30	235	7 mm	100E
MC100EP451MNG	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	6		3.3	-4.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.55 ns		Shift Registers	.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
MC100EP52DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL	1	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
MC10EL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL	1	TUBE	5	-5.2		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC74AC273DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS	8	RAIL	5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.4	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G20	3	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e3	30	260	12.8 mm	AC
MC74AC74DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	95000000 Hz	CMOS	1	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	8.65 mm	AC
MC74VHC74DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	RAIL	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	17.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	AHC/VHC
MM74HCT273N	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS	1		5			IN-LINE		46 ns			2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm		TRUE	4.5 V						26.075 mm	HCT
MM74HCT74MTCX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	21000000 Hz	CMOS	1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	44 ns	4 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	21 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	HCT
MC14013BCP	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	2000000 Hz	CMOS	1	RAIL	5	5/15	50 pF	IN-LINE	DIP14,.3	350 ns		FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	7 MHz	R-PDIP-T14		18 V	4.69 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e0	30	235	18.86 mm	4000/14000/40000
MC74AC174MEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	6	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	12.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4			10.2 mm	AC
MC74AC174ML1	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	6	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	12.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	100 MHz	R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e0			10.2 mm	AC
MM74HCT74MX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	21000000 Hz	CMOS	1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	44 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	21 MHz	R-PDSO-G14	1	5.5 V	1.753 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	8.625 mm	HCT
74VHC74M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	RAIL	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.25	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	8.625 mm	AHC/VHC/H/U/V
MM74HCT273WM	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	21000000 Hz	CMOS	8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	46 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	21 MHz	R-PDSO-G20	3	5.5 V	2.642 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e3	30	260	12.8015 mm	HCT
MC14013BD	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS	1	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP14,.25	350 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	7 MHz	R-PDSO-G14	1	18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e0		235	8.65 mm	4000/14000/40000
MC14027BFR1	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	1500000 Hz	CMOS	2	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	350 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	6.5 MHz	R-PDSO-G16		18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4			10.2 mm	4000/14000/40000
MC74AC175DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	139000000 Hz	CMOS	4		5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	187 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	9.9 mm	AC
MC74HC174AN	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS	6	RAIL	4.5	2/6	50 pF	IN-LINE	DIP16,.3	165 ns	4 Amp	FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	24 MHz	R-PDIP-T16		6 V	4.44 mm	7.62 mm	Not Qualified	TRUE	2 V			e0	30	235	19.175 mm	HC/UH
MC74HC74N	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	1		5			IN-LINE						125 Cel			POSITIVE EDGE	-55 Cel		DUAL		R-PDIP-T14		6 V				COMPLEMENTARY	2 V							HC/UH

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.