Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC14598BCPG	Onsemi	D LATCH	MILITARY	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8		5	5/15	50 pF	IN-LINE	DIP18,.3	320 ns	1.2 Amp	FF/Latches	2.54 mm	125 Cel		3-STATE	HIGH LEVEL	-55 Cel	TIN	DUAL		R-PDIP-T18		18 V	4.57 mm	7.62 mm	Not Qualified	TRUE	3 V			e3		260	22.73 mm	4000/14000/40000
SN74LS174MEL	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		6		5			SMALL OUTLINE		30 ns			1.27 mm	70 Cel			POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G16		5.25 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.75 V			e4			10.2 mm	LS
MC10H131MELG	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		2	TR				SMALL OUTLINE	SOP16,.3	1.7 ns		FF/Latches	1.27 mm	75 Cel			POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	250 MHz	R-PDSO-G16			2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY		62 mA		e4		260	10.2 mm	10H
MC10186P	Onsemi	D FLIP-FLOP	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6		ECL		1					IN-LINE	DIP16,.3	4.5 ns		FF/Latches	2.54 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-30 Cel	TIN LEAD	DUAL	125 MHz	R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE		121 mA	COMMON RESET, RESET ACTIVE ONLY WHEN CLOCK IS LOW	e0		235	19.175 mm	10K
MC74ACT74N	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	125000000 Hz	CMOS		1		5	5	50 pF	IN-LINE	DIP14,.3	13 ns	24 Amp	FF/Latches	2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDIP-T14		5.5 V	4.69 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0	30	235	18.86 mm	ACT
MC14099BFEL	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	400 ns		FF/Latches	1.27 mm	125 Cel			LOW LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	3	18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH	e4		260	10.2 mm	4000/14000/40000
MC14076BDR2G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1800000 Hz	CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	600 ns		FF/Latches	1.27 mm	125 Cel		3-STATE	POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	6 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3	30	260	9.9 mm	4000/14000/40000
MC14013BCL	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2		CMOS		1			5/15	50 pF	IN-LINE	DIP14,.3			FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-XDIP-T14					Not Qualified	COMPLEMENTARY				e0				4000/14000/40000
MC74ACT273MELG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	12 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	3	5.5 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.5 V			e4		260	12.575 mm	ACT
MC10H186L	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	250000000 Hz	ECL		6					IN-LINE	DIP16,.3	3 ns		FF/Latches	2.54 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	250 MHz	R-GDIP-T16			5.08 mm	7.62 mm	Not Qualified	TRUE		121 mA	RESET ACTIVE ONLY WHEN CLOCK IS LOW	e0			19.49 mm	10H
MC74ACT377N	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	125000000 Hz	CMOS		8		5	5	50 pF	IN-LINE	DIP20,.3	11 ns	24 Amp	FF/Latches	2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDIP-T20		5.5 V	4.57 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e0		235	26.415 mm	ACT
MC74HC174AFEL	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	165 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	3	6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4		260	10.2 mm	HC/UH
MC10H175FNG	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		5	RAIL				CHIP CARRIER	LDCC20,.4SQ	2 ns		FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD		S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		107 mA		e3		260	8.965 mm	10H
MC10E431FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3	1000000000 Hz	ECL		1		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.85 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	132 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC74HC175AFELG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		4	TR	3	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP16,.3	225 ns	4 Amp	FF/Latches	.65 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	3	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
MC74AC377ML2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	75000000 Hz	CMOS			TR		3.3/5	50 pF	SMALL OUTLINE	SOP20,.3		12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified		3 V			e0
MC10EL35MNR4G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	1400000000 Hz	ECL		2	TR	5	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.7 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	1800 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3			2 mm	10EL
MC100EP35DTG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.49 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
MC74LCX74M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS		1	RAIL	2.5	3.3	50 pF	SMALL OUTLINE	SOP14,.3	8.4 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G14	3	3.6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	LVC/LCX/Z
MC74LCX74DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS		1	RAIL	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	8.4 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	LVC/LCX/Z
MC74AC174DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		6	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	12.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	100 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e0		235	9.9 mm	AC
MC74LCX74DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS		1	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	8.4 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	5 mm	LVC/LCX/Z
MC10E452FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		5		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.85 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
NC7SP74L8X	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	1	150000000 Hz	CMOS		1	TR	1.2	1.2/3.3	30 pF	CHIP CARRIER	LCC8,.06SQ,20	43 ns	.5 Amp	FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	250 MHz	S-XQCC-N8	1	3.6 V	.55 mm	1.6 mm	Not Qualified	COMPLEMENTARY	.9 V			e4	30	260	1.6 mm	P
MC74AC174DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		6	TR	5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	12.5 ns	12 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	100 MHz	R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e0			5 mm	AC
MC10EL31DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	10EL
MC74LVX74DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	50000000 Hz	CMOS		1	TR	2.7	3.3	50 pF	SMALL OUTLINE	SOP14,.25	22 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	80 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	8.65 mm	LV/LV-A/LVX/H
MC10H176FNR2G	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		6	TR				CHIP CARRIER	LDCC20,.4SQ	2.2 ns		FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		123 mA		e3		260	8.965 mm	10H
MC14027BFELG	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	1500000 Hz	CMOS		2	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	350 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	6.5 MHz	R-PDSO-G16	3	18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4		260	10.2 mm	4000/14000/40000
MC74ACT259N	Onsemi	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		1	RAIL	5	5	50 pF	IN-LINE	DIP16,.3	12.5 ns	24 Amp	FF/Latches	2.54 mm	85 Cel			LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDIP-T16		5.5 V	4.44 mm	7.62 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e0		235	19.175 mm	ACT
74LCX74SJX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		2.5			SMALL OUTLINE		8.4 ns				85 Cel			POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G14		3.6 V				COMPLEMENTARY	2 V							LVC/LCX/Z
MC100EP51DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.45 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
74LVX74SJ	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		2.7			SMALL OUTLINE		18.5 ns				85 Cel			POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G14		3.6 V				COMPLEMENTARY	2 V							LV/LV-A/LVX/H
MC10133FN	Onsemi	D LATCH	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		ECL		2					CHIP CARRIER		6 ns			1.27 mm	85 Cel		OPEN-EMITTER	HIGH LEVEL	-30 Cel	TIN LEAD	QUAD		S-PQCC-J20			4.57 mm	8.9662 mm	Not Qualified	TRUE				e0			8.9662 mm	10K
MC74HC74AFG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	RAIL	3	2/6	50 pF	SMALL OUTLINE	SOP14,.3	150 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	HC/UH
MC14042BCP	Onsemi	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	440 ns		FF/Latches	2.54 mm	125 Cel			HIGH LEVEL	-55 Cel	TIN LEAD	DUAL		R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e0		235	19.175 mm	4000/14000/40000
SN74LS175MEL	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		4		5			SMALL OUTLINE		25 ns			1.27 mm	70 Cel			POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G16		5.25 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.75 V			e4			10.2 mm	LS
MC10E154FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	5	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	91 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10EP31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.41 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	4.9 mm	10E
MC100LVEL51DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	TR	3.3	-3.3		SMALL OUTLINE	SOP8,.25	.52 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2800 MHz	R-PDSO-G8		3.8 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	4.9 mm	100LVEL
MC74VHC74ML1	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS			TR		2/5.5	50 pF	SMALL OUTLINE	SOP14,.3		8 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified					e0
MC100E431FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3	1000000000 Hz	ECL		1		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.85 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin (Sn)	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	152 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	40	260	11.505 mm	100E
MM74HCT273WMX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	21000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	46 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	21 MHz	R-PDSO-G20	3	5.5 V	2.642 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e3	30	260	12.8015 mm	HCT
MM74HC175MTCX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		4	TR		2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns	4 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	70 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
MC100EL31DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	RAIL	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	100EL
MC74LCX374DTEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	150000000 Hz	CMOS			TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		24 Amp	FF/Latches	.635 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC74VHC74DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.25	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	8.65 mm	AHC/VHC
MC10H175FNR2G	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		5	TR				CHIP CARRIER	LDCC20,.4SQ	2 ns		FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD		S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		107 mA		e3		260	8.965 mm	10H

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.