Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74LCX112SJX	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		2.5			SMALL OUTLINE		9 ns			1.27 mm	85 Cel			NEGATIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G16		3.6 V	2.1 mm	5.3 mm		COMPLEMENTARY	2 V						10.2 mm	LVC/LCX/Z
MC74HC112ADTG	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2	TUBE	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		4 Amp	FF/Latches	.65 mm	125 Cel			NEGATIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
MC10EP451MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		6		3.3	-5.2		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.55 ns		Shift Registers	.5 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	10E
MC10H130FN	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		2					CHIP CARRIER	LDCC20,.4SQ	1.7 ns		FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD		S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY				e0		235	8.965 mm	10H
MC10E151FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.9 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	900 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	78 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
74HC74DR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	TR	3	2/6	50 pF	SMALL OUTLINE	SOP14,.25	150 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL		R-PDSO-G14		6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0			8.65 mm	HC/UH
MC10E150FNG	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	900 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	62 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10135FNR2	Onsemi	JBAR-KBAR FLIP-FLOP	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	5200000 Hz	ECL		2	TR		-5.2		CHIP CARRIER	LDCC20,.4SQ	4.5 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-30 Cel	TIN LEAD	QUAD	125 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		75 mA		e0		235	8.965 mm	10K
MC74HC259ADG	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	RAIL	3	2/6	50 pF	SMALL OUTLINE	SOP16,.25	125 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			LOW LEVEL	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e3	30	260	9.9 mm	HC/UH
74LVX273MX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS		1		2.7			SMALL OUTLINE		24 ns			1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G20		3.6 V	2.642 mm	7.493 mm		TRUE	2 V		INPUTS CAN BE DRIVEN BY 3V OR 5V COMPONENTS				12.8015 mm	LV/LV-A/LVX/H
MC10E154FN	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	5		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	91 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC74AC109M	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	100000000 Hz	CMOS		2	RAIL	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	10.2 mm	AC
MC74HC373AFL1	Onsemi	D LATCH	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR		2/6	50 pF	SMALL OUTLINE	SOP20,.3		6 Amp	FF/Latches	1.27 mm	125 Cel		3-STATE		-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G20					Not Qualified					e4
MC100EL51D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1800000000 Hz	ECL		1	RAIL	5	-4.5		SMALL OUTLINE	SOP8,.25	.565 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	36 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	4.9 mm	100EL
MC14013BDTEL	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS			TR		5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25			FF/Latches	.635 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified					e0
MC74ACT273DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	RAIL	5	5	50 pF	SMALL OUTLINE	SOP20,.4	12 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e3	30	260	12.8 mm	ACT
MC14013BDTR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	350 ns		FF/Latches	.65 mm	125 Cel			POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	7 MHz	R-PDSO-G14	1	18 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	3 V			e4	40	260	5 mm	4000/14000/40000
MC74LCX373TDT	Onsemi
MC14042BF	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	440 ns		FF/Latches	1.27 mm	125 Cel			HIGH LEVEL	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G16	3	18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4			10.2 mm	4000/14000/40000
MC74HCT74AN	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	20000000 Hz	CMOS		1	RAIL	5	5	50 pF	IN-LINE	DIP14,.3	36 ns	4 Amp	FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	20 MHz	R-PDIP-T14		5.5 V	4.69 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0	30	235	18.86 mm	HCT
MC100EP35DTR2G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.49 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	100E
MC10175L	Onsemi	D LATCH	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	1		ECL		5			-5.2		IN-LINE	DIP16,.3	4.3 ns		FF/Latches	2.54 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	-30 Cel	TIN LEAD	DUAL		R-CDIP-T16			5.08 mm	7.62 mm	Not Qualified	TRUE		107 mA		e0			19.495 mm	10K
MC100E452FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		5		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.85 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1100 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
SN74LS273DWR2	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	30000000 Hz	TTL		8	TR	5	5		SMALL OUTLINE	SOP20,.4	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel			POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	30 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	27 mA		e0		235	12.8 mm	LS
MC74HC273ADWR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	TR	3	2/6	50 pF	SMALL OUTLINE	SOP20,.4	220 ns	6 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e0		235	12.8 mm	HC/UH
MC74HCT74ADR2G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	36 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	20 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e3	30	260	8.65 mm	HCT
MC74HCT573AFEL	Onsemi																													NICKEL PALLADIUM GOLD													e4		260
MC10E212FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		3		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1.025 ns		Other Logic ICs	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10EP451FAR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		6		3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.55 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	10E
MC10153P	Onsemi	D LATCH	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		ECL		2					IN-LINE	DIP16,.3	5.6 ns		FF/Latches	2.54 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	-30 Cel	TIN LEAD	DUAL		R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE		83 mA		e0		235	19.175 mm	10K
MC100LVEL51MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2900000000 Hz	ECL		1	TR	3.3	-3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.52 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	DUAL	2800 MHz	S-XDSO-N8	1	3.8 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V		30	260	2 mm	100LVEL
MC14099BDW	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.4	400 ns		FF/Latches	1.27 mm	125 Cel			LOW LEVEL	-55 Cel	TIN LEAD	DUAL		R-PDSO-G16	1	18 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH	e0		235	10.3 mm	4000/14000/40000
MC10H131FN	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		2	RAIL				CHIP CARRIER	LDCC20,.4SQ	1.7 ns		FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin/Lead (Sn80Pb20)	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		62 mA		e0	30	235	8.965 mm	10H
SN74LS174DR2	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	30000000 Hz	TTL		6	TR	5	5		SMALL OUTLINE	SOP16,.25	30 ns	8 Amp	FF/Latches	1.27 mm	70 Cel			POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	30 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	26 mA		e0		235	9.9 mm	LS
MC74LCX74ML1	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS			TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.3		24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified					e0
MC74VHCT373ADTR2G	Onsemi	D LATCH	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		8 Amp	FF/Latches	.635 mm	85 Cel		3-STATE		-40 Cel		DUAL		R-PDSO-G20					Not Qualified
MC10H186FNG	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		6					CHIP CARRIER	LDCC20,.4SQ	3 ns		FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		121 mA	RESET ACTIVE ONLY WHEN CLOCK IS LOW	e3		260	8.965 mm	10H
MC100EP51DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.45 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
MC74AC259MEL	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	17 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	3	6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4		260	10.2 mm	AC
MC100LVEL29DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL		1	TR	3.3	-3.3		SMALL OUTLINE	SOP20,.4	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	1100 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
MC100EL35D	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	RAIL	5	+-5		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn80Pb20)	DUAL	1800 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0	30	235	4.9 mm	100EL
MC10E143FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9		5			CHIP CARRIER		1 ns			1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	10E
MC14175BD	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS		4		5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	400 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	6.5 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e0		235	9.9 mm	4000/14000/40000
MC74VHC74DTRG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		17.5 ns			.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14		5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4			5 mm	AHC/VHC
MC74HCT259ADR2G	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	32 ns	5.2 Amp	FF/Latches	1.27 mm	125 Cel			LOW LEVEL	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e3	30	260	9.9 mm	HCT
MC74VHC74DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		1	RAIL	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	17.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	40	260	5 mm	AHC/VHC
MC74AC273DWR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.4	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G20	1	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e0		235	12.8 mm	AC
MC74ACT377NG	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	125000000 Hz	CMOS		8		5	5	50 pF	IN-LINE	DIP20,.3	11 ns	24 Amp	FF/Latches	2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	125 MHz	R-PDIP-T20		5.5 V	4.57 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e3		260	26.415 mm	ACT

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.