Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74HC74DTR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS	1	TR	3	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	150 ns	4 Amp	FF/Latches	.65 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL		R-PDSO-G14		6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e0			5 mm	HC/UH
MC10EP31MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	3000000000 Hz	ECL	1	TR	3.3	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.41 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		S-XDSO-N8	1	5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e4	30	260	2 mm	10E
MC74HC74AFELG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS	1	TR	3	2/6	50 pF	SMALL OUTLINE	SOP14,.3	150 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	HC/UH
MC10H175MG	Onsemi	D LATCH	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL	5	RAIL				SMALL OUTLINE	SOP16,.3	2 ns		FF/Latches	1.27 mm	75 Cel			LOW LEVEL	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16			2.05 mm	5.275 mm	Not Qualified	TRUE		107 mA		e4		260	10.2 mm	10H
MM74HCT574NX	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8	TR	5		50 pF	IN-LINE	DIP20,.3	38 ns	6 Amp		2.54 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm		TRUE	4.5 V	2 mA					26.075 mm	HCT
MM74HCT273SJX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	21000000 Hz	CMOS	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	46 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	21 MHz	R-PDSO-G20	1	5.5 V	2.1 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e3	30	260	12.6 mm	HCT
MC74LCX74DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS	1	RAIL	2.5	3.3	50 pF	SMALL OUTLINE	SOP14,.25	8.4 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	8.65 mm	LVC/LCX/Z
MC100E150FN	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	6		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	900 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	72 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC74AC273MELG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS	8	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.3	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4		260	12.575 mm	AC
MC74HCT273ADTR2G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	35 ns	4 Amp	FF/Latches	.65 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4	30	260	6.5 mm	HCT
MC100E431FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3	1000000000 Hz	ECL	1	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.85 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	152 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	100E
MC74HC175N	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4	20000000 Hz	CMOS				2/6	50 pF	IN-LINE	DIP16,.3		4 Amp	FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL		R-PDIP-T16					Not Qualified					e0		235
MC74LCX74DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS	1	RAIL	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	8.4 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	40	260	5 mm	LVC/LCX/Z
MC100E431FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3	1000000000 Hz	ECL	1		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.85 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin/Lead (Sn80Pb20)	QUAD	1100 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	152 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0	30	235	11.505 mm	100E
MC74ACT74DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS	1		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	13 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4		260	5 mm	ACT
MC100EL52MNR4	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2200000000 Hz	ECL	1	TR	5	-4.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.465 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			2 mm	100EL
MC100EP31DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL	1	TR	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.41 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e0		235	4.9 mm	100E
MC100E151FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL	6	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.9 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	900 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC100LVEL30DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL	3		3.3	-3.3		SMALL OUTLINE	SOP20,.4	.82 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1200 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	12.8 mm	100LVEL
MC74VHC74D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	RAIL	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.25	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	8.65 mm	AHC/VHC
74LCX74SJ	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS	1	RAIL	2.5	3.3	50 pF	SMALL OUTLINE	SOP14,.3	8.4 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	2.1 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	10.2 mm	LVC/LCX/Z
MC14174BFR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS	6	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	400 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	6.5 MHz	R-PDSO-G16		18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V			e0			10.2 mm	4000/14000/40000
DM74ALS273MSAX	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		TTL	1	TR	5		50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	15 ns			.65 mm	70 Cel			POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDSO-G20		5.5 V	1.8 mm	5.3 mm		TRUE	4.5 V	29 mA					7.4 mm	ALS
MC10E452FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL	5		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.85 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1100 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC74LCX74D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS	1	RAIL	2.5	3.3	50 pF	SMALL OUTLINE	SOP14,.25	8.4 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	8.65 mm	LVC/LCX/Z
MC74HCT74ADR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS	1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	36 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	20 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0		235	8.65 mm	HCT
MC74ACT74DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS	1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	13 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	ACT
MC10H186P	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	250000000 Hz	ECL	6					IN-LINE	DIP16,.3	3 ns		FF/Latches	2.54 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin/Lead (Sn80Pb20)	DUAL	250 MHz	R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE		121 mA	RESET ACTIVE ONLY WHEN CLOCK IS LOW	e0	30	235	19.175 mm	10H
MC74VHC74M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1		3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.3	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14		5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4			10.2 mm	AHC/VHC
MC10131P	Onsemi	D FLIP-FLOP	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	125000000 Hz	ECL	1			-5.2		IN-LINE	DIP16,.3	4.5 ns		FF/Latches	2.54 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-30 Cel	TIN LEAD	DUAL	125 MHz	R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY		62 mA	WITH ADDITIONAL COMMON CLOCK	e0	30	235	19.175 mm	10K
MC74HCT273ADWR2G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR	5	5		SMALL OUTLINE	SOP20,.4	35 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	20 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e3	30	260	12.8 mm	HCT
MC74HC112AFELG	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		TR		2/6	50 pF	SMALL OUTLINE	SOP16,.3		4 Amp	FF/Latches	1.27 mm	125 Cel			NEGATIVE EDGE	-55 Cel		DUAL		R-PDSO-G16					Not Qualified
MC74HC273AFR1	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		3			SMALL OUTLINE		220 ns			1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G20		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4			12.575 mm	HC/UH
MC74VHC74DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	17.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	40	260	5 mm	AHC/VHC
MC74HC573ADTEL	Onsemi	D LATCH	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR		2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		6 Amp	FF/Latches	.635 mm	125 Cel		3-STATE		-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC74VHCT74AMR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5			SMALL OUTLINE		10 ns			1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	80 MHz	R-PDSO-G14		5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0			10.2 mm	AHCT/VHCT
SN74LS273MEL	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	30000000 Hz	TTL	8	TR	5	5		SMALL OUTLINE	SOP20,.3	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel			POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G20	1	5.25 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.75 V	27 mA		e4			12.575 mm	LS
MC14044BDR2	Onsemi	R-S LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	350 ns	.88 Amp	FF/Latches	1.27 mm	125 Cel		3-STATE	LOW LEVEL	-55 Cel	TIN LEAD	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e0		235	9.9 mm	4000/14000/40000
MM74HC175SJ	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	4		5		50 pF	SMALL OUTLINE	SOP16,.3	190 ns	4 Amp		1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		DUAL	28 MHz	R-PDSO-G16		6 V	2.1 mm	5.3 mm		COMPLEMENTARY	2 V						10.1 mm	HC/UH
MC74HCT273ANG	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS	8	RAIL	5	5	50 pF	IN-LINE	DIP20,.3	35 ns	4 Amp	FF/Latches	2.54 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	20 MHz	R-PDIP-T20		5.5 V	4.57 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e3		260	26.415 mm	HCT
MC100EL51DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1800000000 Hz	ECL	1	TR	5	-4.5		SMALL OUTLINE	SOP8,.25	.565 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	36 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	4.9 mm	100EL
MC74ACT74MEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS	1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.3	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	3	5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4		260	10.2 mm	ACT
MC10EL35DR2G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL	2	TR	5	-5.2		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	4.9 mm	10EL
MC74AC273NG	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	75000000 Hz	CMOS	8	RAIL	5	3.3/5	50 pF	IN-LINE	DIP20,.3	14.5 ns	12 Amp	FF/Latches	2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin (Sn)	DUAL	125 MHz	R-PDIP-T20		6 V	4.57 mm	7.62 mm	Not Qualified	TRUE	2 V			e3	40	260	26.415 mm	AC
MC100LVEL31DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL	1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2900 MHz	S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	38 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	3 mm	100LVEL
MM74HCT74NX	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	1	TR	5		50 pF	IN-LINE	DIP14,.3	44 ns				85 Cel			POSITIVE EDGE	-40 Cel		DUAL	21 MHz	R-PDIP-T14		5.5 V				COMPLEMENTARY	4.5 V							HCT
MC100LVEL51DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL	1	RAIL	3.3	-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.52 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2800 MHz	S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	3 mm	100LVEL
MC10EL31DTG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL	1	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	10EL

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.