Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC74HC175ADTEL	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	6000000 Hz	CMOS			TR		2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		2.4 Amp	FF/Latches	.635 mm	125 Cel		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified					e0
MC10E451FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1.05 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin/Lead (Sn80Pb20)	QUAD	1100 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	101 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0	30	235	11.505 mm	10E
MC10EL51DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1	TUBE	5	-5.2		SMALL OUTLINE	SOP8,.25	.565 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC10EL51DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE	SOP8,.25	.565 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC10EL31DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	10EL
MC10231FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	200000000 Hz	ECL		1			-5.2		CHIP CARRIER	LDCC20,.4SQ	3.3 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-30 Cel	TIN LEAD	QUAD	200 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		72 mA		e0		235	8.965 mm	10K
NL17SZ74MU3TCG	Onsemi	D FLIP-FLOP	MILITARY	NO LEAD	8	VSON	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		1	TR	2.3		50 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,14	13 ns	32 Amp		.35 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	250 MHz	R-XDSO-N8	1	5.5 V	.55 mm	1 mm		COMPLEMENTARY	1.65 V	100 mA					1.45 mm	LVC/LCX/Z
MC14174BDG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS		6	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	400 ns		FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	6.5 MHz	R-PDSO-G16		18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3			9.9 mm	4000/14000/40000
MC100LVEL51D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE	SOP8,.25	.52 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2800 MHz	R-PDSO-G8		3.8 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	4.9 mm	100LVEL
MC100EP52DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	100E
NC7SV74L8X	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	1	150000000 Hz	CMOS		1	TR		1.2/3.3	30 pF	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	9.9 ns	2 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	250 MHz	S-XQCC-N8	1	3.6 V	.55 mm	1.6 mm	Not Qualified	COMPLEMENTARY	.9 V			e4	30	260	1.6 mm	AUP/ULP/V
SN74LS259ML1	Onsemi	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		8	TR	5	5		SMALL OUTLINE	SOP16,.3		8 Amp	FF/Latches	1.27 mm	70 Cel			0 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified			36 mA		e0
MC74AC259D	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	RAIL	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	17 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e0		235	9.9 mm	AC
MC74HCT273AN	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		8	RAIL	5	5	50 pF	IN-LINE	DIP20,.3	35 ns	4 Amp	FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	20 MHz	R-PDIP-T20		5.5 V	4.57 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e0	30	235	26.415 mm	HCT
74HC74DTR2G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	TR	3	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	150 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G14	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
MC100EP31DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	3 mm	100E
MC14043BDR2	Onsemi	R-S LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	350 ns	.88 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE	HIGH LEVEL	-55 Cel	TIN LEAD	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e0		235	9.9 mm	4000/14000/40000
MC100EL31DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.59 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	100EL
MC14027BCL	Onsemi	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	2	1500000 Hz	CMOS			RAIL		5/15	50 pF	IN-LINE	DIP16,.3			FF/Latches	2.54 mm	125 Cel		MASTER-SLAVE	-55 Cel		DUAL		R-XDIP-T16					Not Qualified
MC100LVEL51MNR4	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2900000000 Hz	ECL		1	TR	3.3	-3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.52 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2800 MHz	S-XDSO-N8		3.8 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0			2 mm	100LVEL
MC100EP52D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.38 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	4.9 mm	100E
MC14027BCP	Onsemi	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	1500000 Hz	CMOS		2	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	350 ns		FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	6.5 MHz	R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e0	30	235	19.175 mm	4000/14000/40000
MC10E156FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10EP131FA	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		4	TRAY	3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		FF/Latches	.8 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD		S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	120 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	10E
MC74ACT174MEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	140000000 Hz	CMOS		6	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.3	11.5 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	140 MHz	R-PDSO-G16		5.5 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.5 V			e4		260	10.2 mm	ACT
MC100EP35DR2G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	TR	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.49 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
MC74ACT574ML1	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	85000000 Hz	CMOS			TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3		24 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC74AC377NG	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	75000000 Hz	CMOS		8		5	3.3/5	50 pF	IN-LINE	DIP20,.3	14.5 ns	12 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL	125 MHz	R-PDIP-T20		6 V	4.57 mm	7.62 mm	Not Qualified	TRUE	2 V			e3		260	26.415 mm	AC
MC14027BFEL	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	1500000 Hz	CMOS		2	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	350 ns		FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	6.5 MHz	R-PDSO-G16	3	18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4		260	10.2 mm	4000/14000/40000
SN74LS175M	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		4		5			SMALL OUTLINE		25 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G16		5.25 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.75 V			e4			10.2 mm	LS
MC10EP35DTR2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.49 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	10E
MC74AC259DT	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	17 ns	12 Amp	FF/Latches	.65 mm	85 Cel		LOW LEVEL	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e0	30	240	5 mm	AC
MC10E167FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	2	6		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1.05 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1000 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	113 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC100LVEL29DW	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE	SOP20,.4	.7 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn80Pb20)	DUAL	1100 MHz	R-PDSO-G20		3.8 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0	30	235	12.8 mm	100LVEL
MC14174BFL2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6	2000000 Hz	CMOS			TR		5/15	50 pF	SMALL OUTLINE	SOP16,.3			FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified					e0
MC10H131L	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	250000000 Hz	ECL		2					IN-LINE	DIP16,.3	1.7 ns		FF/Latches	2.54 mm	75 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	250 MHz	R-GDIP-T16			5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY		62 mA		e0		235	19.49 mm	10H
MM74HC273NX	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	21000000 Hz	CMOS		8	TR	5		50 pF	IN-LINE, SHRINK PITCH	DIP20,.3	170 ns	4 Amp		2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDIP-T20		6 V	5.08 mm	7.62 mm		TRUE	2 V	.16 mA					26.075 mm	HC/UH
MC10176FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6			-5.2		CHIP CARRIER	LDCC20,.4SQ	4.5 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-30 Cel	Tin/Lead (Sn80Pb20)	QUAD	125 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE		121 mA		e0			8.965 mm	10K
MC74AC273ML2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	125 MHz	R-PDSO-G20		6 V			Not Qualified	TRUE	2 V			e0				AC
MC74HC174ADTR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	TR	4.5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	165 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4		260	5 mm	HC/UH
MC100E212FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		3		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	1.025 ns		Other Logic ICs	1.27 mm	85 Cel		POSITIVE EDGE	0 Cel	Tin/Lead (Sn80Pb20)	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			11.505 mm	100E
MC10EP52MNR4	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	4000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.38 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-XDSO-N8		5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0			2 mm	10E
MC10H135FNR2	Onsemi	JBAR-KBAR FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		2	TR				CHIP CARRIER	LDCC20,.4SQ	2.6 ns		FF/Latches	1.27 mm	75 Cel		POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	250 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		75 mA		e0		235	8.965 mm	10H
MC74AC109D	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	100000000 Hz	CMOS		2		5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0	30	235	9.9 mm	AC
MC74ACT109MEL	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		2	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.3	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G16		5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0			10.2 mm	ACT
DM74ALS273MSA	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		TTL		1		5		50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	15 ns			.65 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDSO-G20		5.5 V	1.8 mm	5.3 mm		TRUE	4.5 V	29 mA					7.4 mm	ALS
MC14013BF	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		1	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP14,.3	350 ns		FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G14		18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4		260	10.2 mm	4000/14000/40000
MC74AC377MR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.3	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G20		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e0			12.575 mm	AC

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.