Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC10186L	Onsemi	D FLIP-FLOP	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	6		ECL		1					IN-LINE	DIP16,.3	4.5 ns		FF/Latches	2.54 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-30 Cel	Tin/Lead (Sn/Pb)	DUAL	125 MHz	R-CDIP-T16			5.08 mm	7.62 mm	Not Qualified	TRUE		121 mA	COMMON RESET, RESET ACTIVE ONLY WHEN CLOCK IS LOW	e0			19.495 mm	10K
MC100EP52DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.38 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	4.9 mm	100E
MC10E156FNR2G	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E155FNR2G	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	6	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.75 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	102 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MM74HC175N	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		4		5	2/6	50 pF	IN-LINE	DIP16,.3	190 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	28 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V			e3			19.305 mm	HC/UH
NL17SZ74MU1TCG	Onsemi	D FLIP-FLOP	MILITARY	NO LEAD	8	VSON	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		1	TR	2.3		50 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.04,20	13 ns	32 Amp		.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		DUAL	250 MHz	R-XDSO-N8	1	5.5 V	.55 mm	1 mm		COMPLEMENTARY	1.65 V	100 mA					1.95 mm	LVC/LCX/Z
MC74AC377DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8	TR	5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	14.5 ns	12 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	AC
MC10173FN	Onsemi	D LATCH	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	4			-5.2		CHIP CARRIER	LDCC20,.4SQ	6.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	-30 Cel	TIN LEAD	QUAD		S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		73 mA	FOUR 2:1 MUX FOLLOWED BY LATCH	e0			8.965 mm	10K
MC14027BCPG	Onsemi	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	1500000 Hz	CMOS		2	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	350 ns		FF/Latches	2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	6.5 MHz	R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e3		260	19.175 mm	4000/14000/40000
MC10H175P	Onsemi	D LATCH	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		ECL		5	RAIL				IN-LINE	DIP16,.3	2 ns		FF/Latches	2.54 mm	75 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	DUAL		R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE		107 mA		e0		235	19.175 mm	10H
MC14013BFL2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE	SOP14,.3	350 ns		FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G14		18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4		260	10.2 mm	4000/14000/40000
MC74ACT374ML2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	90000000 Hz	CMOS			TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3		24 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC74HC74AD	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	RAIL	3	2/6	50 pF	SMALL OUTLINE	SOP14,.25	150 ns	4 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	8.65 mm	HC/UH
MC74AC109ML2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	100000000 Hz	CMOS			TR		3.3/5	50 pF	SMALL OUTLINE	SOP16,.3		12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified		2 V			e0
MC10EL52MNR4	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2200000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.465 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			2 mm	10EL
MC74HCT259ADTG	Onsemi	D LATCH	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		42 ns			.65 mm	125 Cel		LOW LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm		TRUE	4.5 V			e4	30	260	5 mm	HCT
MC100EP35DR2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	TR	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.49 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	4.9 mm	100E
MC100EL35DTR2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	TR	5	+-5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.7 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1800 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	100EL
MC74AC259MG	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	RAIL	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	17 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4		260	10.2 mm	AC
MC74LCX574ML2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	150000000 Hz	CMOS			TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3		24 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC74HC74D	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		5			SMALL OUTLINE						125 Cel		POSITIVE EDGE	-55 Cel		DUAL		R-PDSO-G14		6 V				COMPLEMENTARY	2 V							HC/UH
MC74ACT377M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8		5	5	50 pF	SMALL OUTLINE	SOP20,.3	11 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	3	5.5 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.5 V			e4		260	12.575 mm	ACT
MC74AC109DTR2	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	100000000 Hz	CMOS		2	TR	5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	16 ns	12 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e0			5 mm	AC
MC10EL35MNR4	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	1400000000 Hz	ECL		2	TR	5	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.7 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1800 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			2 mm	10EL
MC14027BFL2	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	1500000 Hz	CMOS		2	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	350 ns		FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	6.5 MHz	R-PDSO-G16		18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4			10.2 mm	4000/14000/40000
MC10EL52DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE	SOP8,.25	.465 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	4.9 mm	10EL
MC14099BDWG	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.4	400 ns		FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	3	18 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH	e3	30	260	10.3 mm	4000/14000/40000
MC10H131FNR2	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		2	TR				CHIP CARRIER	LDCC20,.4SQ	1.7 ns		FF/Latches	1.27 mm	75 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	250 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		62 mA		e0		235	8.965 mm	10H
SN74LS273MR1	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	30000000 Hz	TTL		8	TR	5	5		SMALL OUTLINE	SOP20,.3	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G20		5.25 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.75 V	27 mA		e4			12.575 mm	LS
MC74AC573ML1	Onsemi	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR		3.3/5	50 pF	SMALL OUTLINE	SOP20,.3		12 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified		3.3 V			e0
MC74AC259DTR2	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	17 ns	12 Amp	FF/Latches	.65 mm	85 Cel		LOW LEVEL	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e0	30	240	5 mm	AC
MC74ACT377MR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	11 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G20		5.5 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.5 V			e0			12.575 mm	ACT
MC74HC273ADW	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	RAIL	3	2/6	50 pF	SMALL OUTLINE	SOP20,.4	220 ns	6 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G20	3	6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e0		235	12.8 mm	HC/UH
MC10EP52DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL		S-PDSO-G8	3	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	3 mm	10E
NL17SZ74MQ2TCG	Onsemi	D FLIP-FLOP	MILITARY	NO LEAD	8	VQCCN	RECTANGULAR	UNSPECIFIED	YES	1		CMOS		1	TR	2.3		50 pF	CHIP CARRIER, VERY THIN PROFILE	LCC8,.05X.06,16	13 ns	32 Amp		.4 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		QUAD	250 MHz	R-XQCC-N8	1	5.5 V	.55 mm	1.2 mm		COMPLEMENTARY	1.65 V	100 mA					1.4 mm	LVC/LCX/Z
MM74HCT573NX	Onsemi	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	TR	5		50 pF	IN-LINE	DIP20,.3	44 ns	6 Amp		2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm		TRUE	4.5 V	2 mA					26.075 mm	HCT
MC10EP51DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.37 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	10E
MC10EL51DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.565 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	10EL
MC74HC174ADTR2G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	165 ns	4 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	5 mm	HC/UH
MC100E155FN	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	6	6		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.75 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	117 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC100EL51DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1	TUBE	5	-4.5		SMALL OUTLINE	SOP8,.25	.565 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	36 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC10EL52MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2200000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.465 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3			2 mm	10EL
MC14027BDG	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	1500000 Hz	CMOS		2	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	350 ns		FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	6.5 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e3	30	260	9.9 mm	4000/14000/40000
NL17SZ74MQ1TCG	Onsemi	D FLIP-FLOP	MILITARY	NO LEAD	8	VQCCN	SQUARE	UNSPECIFIED	YES	1		CMOS		1	TR	2.3		50 pF	CHIP CARRIER, VERY THIN PROFILE	LCC8,.06SQ,20	13 ns	32 Amp		.5 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel		QUAD	250 MHz	S-XQCC-N8	1	5.5 V	.6 mm	1.6 mm		COMPLEMENTARY	1.65 V	100 mA					1.6 mm	LVC/LCX/Z
74LVX273M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS		8		2.7	3.3	50 pF	SMALL OUTLINE	SOP20,.4	24 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	80 MHz	R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V			e3	30	260	12.8 mm	LV/LV-A/LVX/H
SN74LS259MEL	Onsemi	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		1	TR	5	5		SMALL OUTLINE	SOP16,.3	32 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		LOW LEVEL	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16		5.25 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.75 V	36 mA	1:8 DMUX FOLLOWED BY LATCH	e4			10.2 mm	LS
MC74HC273ADTG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	RAIL	3	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	220 ns	6 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	HC/UH
MC10EP52DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	RAIL	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.38 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	10E

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.