Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC10175P	Onsemi	D LATCH	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		ECL		5			-5.2		IN-LINE	DIP16,.3	4.3 ns		FF/Latches	2.54 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	-30 Cel	TIN LEAD	DUAL		R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE		107 mA		e0	30	235	19.175 mm	10K
MC100EP52MNR4	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	4000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.38 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-XDSO-N8		5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0			2 mm	100E
MC100E131FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL		4	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.675 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	81 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	100E
MC10H175FN	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		5	RAIL				CHIP CARRIER	LDCC20,.4SQ	2 ns		FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD		S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		107 mA		e0		235	8.965 mm	10H
5962-01-086-4492	Onsemi																																					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
74LCX112SJ	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		2		2.5			SMALL OUTLINE		9 ns			1.27 mm	85 Cel			NEGATIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G16		3.6 V	2.1 mm	5.3 mm		COMPLEMENTARY	2 V						10.2 mm	LVC/LCX/Z
MC74HCT259ADTR2G	Onsemi	D LATCH	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	32 ns	5.2 Amp	FF/Latches	.65 mm	125 Cel			LOW LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4	30	260	5 mm	HCT
MC74ACT273DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	12 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4		260	6.5 mm	ACT
MC74AC377MEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.3	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G20		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e0			12.575 mm	AC
MC100EL30DW	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		3	RAIL	5	-4.5		SMALL OUTLINE	SOP20,.4	.82 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1200 MHz	R-PDSO-G20		5.7 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	12.8 mm	100EL
MC14099BCL	Onsemi	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS		8			5/15	50 pF	IN-LINE	DIP16,.3			FF/Latches	2.54 mm	125 Cel				-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-XDIP-T16					Not Qualified					e0
MC74ACT377DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	11 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V						6.5 mm	ACT
MC14043BFELG	Onsemi	R-S LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	350 ns		FF/Latches	1.27 mm	125 Cel		3-STATE	HIGH LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	3	18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V			e4	30	260	10.2 mm	4000/14000/40000
MC10E131FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL		4	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.675 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	70 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC74ACT259DR2	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	12.5 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e0		235	9.9 mm	ACT
MC74LVX74DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	50000000 Hz	CMOS		1	RAIL	2.7	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	22 ns	4 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	5 mm	LV/LV-A/LVX/H
MC10H176M	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		6	RAIL				SMALL OUTLINE	SOP16,.3	2.2 ns		FF/Latches	1.27 mm	75 Cel			POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	250 MHz	R-PDSO-G16			2.05 mm	5.275 mm	Not Qualified	TRUE		123 mA		e4		260	10.2 mm	10H
74LVX74SJX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		2.7			SMALL OUTLINE		18.5 ns				85 Cel			POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G14		3.6 V				COMPLEMENTARY	2 V							LV/LV-A/LVX/H
MC10EL31D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	RAIL	5	-5.2		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn80Pb20)	DUAL	2200 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0	30	235	4.9 mm	10EL
MC74HC175ADR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		4	TR	3	2/6	50 pF	SMALL OUTLINE	SOP16,.25	225 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	9.9 mm	HC/UH
MC100E154FN	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	5		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	105 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
DM74ALS273N	Onsemi	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		TTL		1		5		50 pF	IN-LINE	DIP20,.3	15 ns			2.54 mm	70 Cel			POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDIP-T20		5.5 V	3.68 mm	7.62 mm		TRUE	4.5 V	29 mA					26 mm	ALS
MC74ACT174DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	140000000 Hz	CMOS		6		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	11.5 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	140 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e0			5 mm	ACT
MM74HC175NX	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		4		5		50 pF	IN-LINE	DIP16,.3	190 ns	4 Amp		2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel		DUAL	28 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm		COMPLEMENTARY	2 V						19.3 mm	HC/UH
MC74HC273AFG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	RAIL	3	2/6	50 pF	SMALL OUTLINE	SOP20,.3	220 ns	6 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G20	3	6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4	30	260	12.575 mm	HC/UH
MC74ACT74DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	13 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4		260	5 mm	ACT
MC10EL52DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1800000000 Hz	ECL		1	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.465 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	10EL
MC10EL51DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.565 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	10EL
MC10EL31DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		1	TR	5	-5.2		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	10EL
MC100EL35DR2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	TR	5	+-5		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1800 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	4.9 mm	100EL
MC14013BFR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE	SOP14,.3	350 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G14		18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4		260	10.2 mm	4000/14000/40000
MC74ACT377DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	11 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e3	30	260	12.8 mm	ACT
MC74HC74AF	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	RAIL	3	2/6	50 pF	SMALL OUTLINE	SOP14,.3	150 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	HC/UH
MC100EL30DWR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		3	TR	5	-4.5		SMALL OUTLINE	SOP20,.4	.82 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1200 MHz	R-PDSO-G20		5.7 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC14043BFEL	Onsemi	R-S LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	350 ns		FF/Latches	1.27 mm	125 Cel		3-STATE	HIGH LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	3	18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V			e4		260	10.2 mm	4000/14000/40000
MC100E150FNR2G	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel			LOW LEVEL	0 Cel	TIN	QUAD	900 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	72 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC10E452FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		5		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.85 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10EP35D	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	RAIL	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.49 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	4.9 mm	10E
MC74HC174ADT	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	RAIL	4.5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	165 ns	4 Amp	FF/Latches	.65 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4		260	5 mm	HC/UH
MC74HCT374ADTEL	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	20000000 Hz	CMOS			TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		6 Amp	FF/Latches	.635 mm	125 Cel		3-STATE	POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC100LVEL31DG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2900 MHz	R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	38 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	4.9 mm	100LVEL
MC74ACT574ML2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	85000000 Hz	CMOS			TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3		24 Amp	FF/Latches	1.27 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC14013BFG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		1	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP14,.3	350 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G14	3	18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4	30	260	10.2 mm	4000/14000/40000
MC74HC175ADTR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		4	TR	3	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	225 ns	4 Amp	FF/Latches	.65 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	5 mm	HC/UH
MC74HC174ADR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	165 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin/Lead (Sn85Pb15)	DUAL	24 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e0	30	235	9.9 mm	HC/UH
MC100E451FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	1.05 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	116 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC10E256FN	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.9 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	83 mA	NECL MODE OPERATING RANGE:VCC=0 V WITH VEE=-4.2 V TO -5.7 V	e0			11.505 mm	10E
MC10EP131MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1	3000000000 Hz	ECL		4	TR	3.3	-5.2		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.6 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	QUAD		S-XQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V	120 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	10E

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.