Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC74HC112ADTR2G	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		2	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		4 Amp	FF/Latches	.65 mm	125 Cel			NEGATIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
MC14175BF	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS		4		5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	400 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	6.5 MHz	R-PDSO-G16		18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4			10.2 mm	4000/14000/40000
MC74ACT175N	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	145000000 Hz	CMOS		4		5	5	50 pF	IN-LINE	DIP16,.3	12 ns	24 Amp	FF/Latches	2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	145 MHz	R-PDIP-T16		5.5 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0		235	19.175 mm	ACT
MC100E150FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	900 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	72 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC74ACT109DTR2	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		2	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	13 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0			5 mm	ACT
MC100E175FNR2G	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	152 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.5V	e3		260	11.505 mm	100E
MC74HC273AFEL	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	TR	3	2/6	50 pF	SMALL OUTLINE	SOP20,.3	220 ns	6 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G20	3	6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4		260	12.575 mm	HC/UH
MC14042BFEL	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	440 ns		FF/Latches	1.27 mm	125 Cel			HIGH LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	3	18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4		260	10.2 mm	4000/14000/40000
MC74ACT74M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		1		5	5	50 pF	SMALL OUTLINE	SOP14,.3	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14		5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			10.2 mm	ACT
MC14027BBEBS	Onsemi	J-K FLIP-FLOP	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		CMOS		2		5		50 pF	IN-LINE	DIP16,.3	350 ns			2.54 mm	125 Cel			MASTER-SLAVE	-55 Cel	TIN LEAD	DUAL		R-GDIP-T16		18 V				COMPLEMENTARY	3 V			e0
MC100EL29DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL		1		5	-4.5		SMALL OUTLINE	SOP20,.4	.7 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1100 MHz	R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC74HC74DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS			TR		2/6		SMALL OUTLINE	SOP14,.25			FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified					e0
MC74LCX74SD	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS		1		3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	8 ns	24 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	150 MHz	R-PDSO-G14		3.6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e0			6.2 mm	LVC/LCX/Z
MC100E167FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	2	6	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	1.05 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel			POSITIVE EDGE	0 Cel	TIN	QUAD	1000 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	130 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC10E256FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.9 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	83 mA	NECL MODE OPERATING RANGE:VCC=0 V WITH VEE=-4.2 V TO -5.7 V	e0			11.505 mm	10E
MC10EL51DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.565 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	3 mm	10EL
MC74HC175ADR2G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	20000000 Hz	CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	225 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	9.9 mm	HC/UH
MC10EP35DT	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	RAIL	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.49 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	10E
NL17SZ74	Onsemi	D FLIP-FLOP	MILITARY		8				YES	1	175000000 Hz	CMOS		1	TR	3.3		50 pF			14.5 ns	24 Amp			125 Cel			POSITIVE EDGE	-55 Cel			250 MHz		1	5.5 V				COMPLEMENTARY	1.65 V	.01 mA						LVC/LCX/Z
MC74ACT74D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		1		5	5	50 pF	SMALL OUTLINE	SOP14,.25	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0		235	8.65 mm	ACT
MC14042BFR1	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	440 ns		FF/Latches	1.27 mm	125 Cel			HIGH LEVEL	-55 Cel	TIN LEAD	DUAL		R-PDSO-G16		18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e0			10.2 mm	4000/14000/40000
MC100EL35DTR2G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	TR	5	+-5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.7 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	100EL
MC74AC259DR2G	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	17 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			LOW LEVEL	-40 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e3	30	260	9.9 mm	AC
MC74HC259ADR2G	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR	3	2/6	50 pF	SMALL OUTLINE	SOP16,.25	125 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			LOW LEVEL	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e3	30	260	9.9 mm	HC/UH
MC10E451FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1.05 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	101 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10H186FN	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		6					CHIP CARRIER	LDCC20,.4SQ	3 ns		FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		121 mA	RESET ACTIVE ONLY WHEN CLOCK IS LOW	e0		235	8.965 mm	10H
MC100E451FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	1.05 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin (Sn)	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	116 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	40	260	11.505 mm	100E
MC10EP451FA	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		6		3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.55 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN LEAD	QUAD		S-PQFP-G32		5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	10E
MC10176FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6	TR		-5.2		CHIP CARRIER	LDCC20,.4SQ	4.5 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-30 Cel	Tin/Lead (Sn80Pb20)	QUAD	125 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE		121 mA		e0			8.965 mm	10K
MC74AC373ML1	Onsemi	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR		3.3/5	50 pF	SMALL OUTLINE	SOP20,.3		12 Amp	FF/Latches	1.27 mm	85 Cel		3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified		3 V			e0
MC74ACT377MR1	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	125000000 Hz	CMOS			TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3		24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC74AC74M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	95000000 Hz	CMOS		1		5	5	50 pF	SMALL OUTLINE	SOP14,.3	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4			10.2 mm	AC
MC100EP51MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	3000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.45 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	DUAL		S-XDSO-N8	1	5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V		30	260	2 mm	100E
MC100EL52MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2200000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.465 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3			2 mm	100EL
MC100E156FN	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	103 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC74ACT273DTEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	TSSOP20,.25	12 ns	24 Amp	FF/Latches	.635 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	125 MHz	R-PDSO-G20		5.5 V			Not Qualified	TRUE	4.5 V			e0				ACT
MC14013BFEL	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE	SOP14,.3	350 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G14	3	18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4		260	10.2 mm	4000/14000/40000
MC74VHCT74ADR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	10 ns	8 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0	NOT SPECIFIED	235	8.65 mm	AHCT/VHCT/VT
MC10E175FNG	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	132 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.5V	e3		260	11.505 mm	10E
MC10EP31DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.41 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e0		235	4.9 mm	10E
MC10168L	Onsemi	D LATCH	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		ECL		4					IN-LINE		6.2 ns			2.54 mm	85 Cel		OPEN-EMITTER	HIGH LEVEL	-30 Cel	TIN LEAD	DUAL		R-GDIP-T16			5.08 mm	7.62 mm	Not Qualified	TRUE				e0			19.495 mm	10K
MC74HC273ADT	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	RAIL	3	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	220 ns	6 Amp	FF/Latches	.65 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4		260	6.5 mm	HC/UH
MC74ACT174D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	140000000 Hz	CMOS		6		5	5	50 pF	SMALL OUTLINE	SOP16,.25	11.5 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	140 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V			e0		235	9.9 mm	ACT
MC10EP52DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.38 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	10E
MC100EL52DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	RAIL	5	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.465 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn90Pb10)	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0	30	235	3 mm	100EL
MC10EP51MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	3000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.37 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	DUAL		S-XDSO-N8	1	5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V		30	260	2 mm	10E
MC74AC109MR2	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	100000000 Hz	CMOS		2	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e0			10.2 mm	AC
MC74LCX373TDW	Onsemi

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.