Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC74ACT109N	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	125000000 Hz	CMOS		2		5	5	50 pF	IN-LINE	DIP16,.3	13 ns	24 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDIP-T16		5.5 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0		235	19.175 mm	ACT
74LVX74M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	50000000 Hz	CMOS		1		2.7	3.3	50 pF	SMALL OUTLINE	SOP14,.25	22 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	8.625 mm	LV/LV-A/LVX/H
SN74LS378DR2	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6	30000000 Hz	TTL			TR	5	5		SMALL OUTLINE	SOP16,.25		8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G16					Not Qualified			22 mA
MC14099BFL1	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	400 ns		FF/Latches	1.27 mm	125 Cel		LOW LEVEL	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16		18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e4			10.2 mm	4000/14000/40000
MC100EP51D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.45 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn80Pb20)	DUAL		R-PDSO-G8		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0	30	235	4.9 mm	100E
MC74HC273ADTR2G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	TR	3	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	220 ns	6 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	HC/UH
MC100LVEL29DWG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL		1	RAIL	3.3	-3.3		SMALL OUTLINE	SOP20,.4	.7 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	1100 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
MC74ACT574DTEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	85000000 Hz	CMOS			TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		24 Amp	FF/Latches	.635 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC74HCT573ADTEL	Onsemi	D LATCH	MILITARY	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		6 Amp	FF/Latches	.635 mm	125 Cel	3-STATE		-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC14042BCL	Onsemi	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	4		CMOS		1		5	5/15	50 pF	IN-LINE	DIP16,.3	440 ns	8.8 Amp	FF/Latches	2.54 mm	125 Cel		HIGH LEVEL	-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-CDIP-T16		18 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V			e0			19.49 mm	4000/14000/40000
MC100E155FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	6	6	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.75 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	117 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC14598BCP	Onsemi	D LATCH	MILITARY	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8		5	5/15	50 pF	IN-LINE	DIP18,.3	320 ns	1.2 Amp	FF/Latches	2.54 mm	125 Cel	3-STATE	HIGH LEVEL	-55 Cel	TIN LEAD	DUAL		R-PDIP-T18		18 V	4.57 mm	7.62 mm	Not Qualified	TRUE	3 V			e0		235	22.73 mm	4000/14000/40000
MM74HCT74MTC	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	21000000 Hz	CMOS		1		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	44 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	21 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	HCT
SN74LS174M	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		6		5			SMALL OUTLINE		30 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G16		5.25 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.75 V			e4			10.2 mm	LS
NL17SZ175DBVT1G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	6	TSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS		1	TR	3.3		50 pF	SMALL OUTLINE, THIN PROFILE	TSOP6,.11,37	16.5 ns	24 Amp		.95 mm	125 Cel		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	175 MHz	R-PDSO-G6	1	5.5 V	1.1 mm	1.5 mm		TRUE	1.65 V	.01 mA		e3	30	260	3 mm	LVC/LCX/Z
MC10EP35DG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	RAIL	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.49 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	10E
MC74AC273MR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G20		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e0			12.575 mm	AC
MC10173P	Onsemi	D LATCH	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		ECL	2	4			-5.2		IN-LINE	DIP16,.3	6.8 ns		Multiplexer/Demultiplexers	2.54 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	-30 Cel	TIN LEAD	DUAL		R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE		73 mA	FOUR 2:1 MUX FOLLOWED BY LATCH	e0	30	235	19.175 mm	10K
MC14174BDR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS		6	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	400 ns		FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	6.5 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e0		235	9.9 mm	4000/14000/40000
MC74AC74DTEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	95000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	TSSOP14,.25	16 ns	12 Amp	FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	125 MHz	R-PDSO-G14		6 V			Not Qualified	COMPLEMENTARY	2 V			e0				AC
MC74AC273DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8	TR	5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	14.5 ns	12 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4		260	6.5 mm	AC
MC10H135L	Onsemi	JBAR-KBAR FLIP-FLOP	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	250000000 Hz	ECL		2	RAIL				IN-LINE	DIP16,.3	2.6 ns		FF/Latches	2.54 mm	75 Cel		POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	250 MHz	R-GDIP-T16			5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY		75 mA		e0			19.49 mm	10H
MC10EP31DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	RAIL	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.41 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e0		235	3 mm	10E
MC74AC74DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	95000000 Hz	CMOS		1		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	8.65 mm	AC
MC14042BDG	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	440 ns		FF/Latches	1.27 mm	125 Cel		HIGH LEVEL	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e3	30	260	9.9 mm	4000/14000/40000
MC100EL35MNR4	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	1400000000 Hz	ECL		2	TR	5	+-5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.7 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1800 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			2 mm	100EL
MM74HC259SJX	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1					SMALL OUTLINE		250 ns			1.27 mm	85 Cel		LOW LEVEL	-40 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	6 V	2.1 mm	5.3 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e3			10.1 mm	HC/UH
MC100EP29MNTXG	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	2		ECL		1	TR	3.3	-4.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	.5 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-XQCC-N20	1	5.5 V	1 mm	4 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4 mm	100E
SN74LS259NG	Onsemi	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL		1		5			IN-LINE		32 ns			2.54 mm	70 Cel		LOW LEVEL	0 Cel		DUAL		R-PDIP-T16		5.25 V	4.44 mm	7.62 mm	Not Qualified	TRUE	4.75 V		1:8 DMUX FOLLOWED BY LATCH		NOT SPECIFIED	NOT SPECIFIED	19.175 mm	LS
MC74ACT259DT	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	12.5 ns	24 Amp	FF/Latches	.65 mm	85 Cel		LOW LEVEL	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e0	30	240	5 mm	ACT
MC10H135M	Onsemi	JBAR-KBAR FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		2	RAIL				SMALL OUTLINE	SOP16,.3	2.6 ns		FF/Latches	1.27 mm	75 Cel		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16			2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY		75 mA		e4		260	10.2 mm	10H
MC100EL29DWR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		ECL		1	TR	5	-4.5		SMALL OUTLINE	SOP20,.4	.7 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1100 MHz	R-PDSO-G20		5.7 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	12.8 mm	100EL
MC10EL51MNR4	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2200000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.565 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	29 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			2 mm	10EL
MC10E150FN	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	900 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	62 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC100E451FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	1.05 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	116 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC100EL35DG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	RAIL	5	+-5		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	4.9 mm	100EL
MC10135P	Onsemi	JBAR-KBAR FLIP-FLOP	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	5200000 Hz	ECL		2			-5.2		IN-LINE	DIP16,.3	4.5 ns		FF/Latches	2.54 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-30 Cel	TIN LEAD	DUAL	125 MHz	R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY		75 mA		e0	30	235	19.175 mm	10K
MC10EL31DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	4.9 mm	10EL
MC10E154FNG	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	5		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	91 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC100E151FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.9 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	900 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC74LCX74DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS		1	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	8.4 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G14	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	LVC/LCX/Z
MC74AC74DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	95000000 Hz	CMOS		1	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G14	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	8.65 mm	AC
MC74ACT174N	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	140000000 Hz	CMOS		6		5	5	50 pF	IN-LINE	DIP16,.3	11.5 ns	24 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	140 MHz	R-PDIP-T16		5.5 V	4.44 mm	7.62 mm	Not Qualified	TRUE	4.5 V			e0		235	19.175 mm	ACT
MC74AC259N	Onsemi	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		1	RAIL	5	3.3/5	50 pF	IN-LINE	DIP16,.3	17 ns	12 Amp	FF/Latches	2.54 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDIP-T16		6 V	4.44 mm	7.62 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e0		235	19.175 mm	AC
MC74ACT273MEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	12 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	3	5.5 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.5 V			e4		260	12.575 mm	ACT
MC14175BFELG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000 Hz	CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.3	400 ns		FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	6.5 MHz	R-PDSO-G16	3	18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4	30	260	10.2 mm	4000/14000/40000
MC10H186PG	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	250000000 Hz	ECL		6					IN-LINE	DIP16,.3	3 ns		FF/Latches	2.54 mm	75 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	DUAL	250 MHz	R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE		121 mA	RESET ACTIVE ONLY WHEN CLOCK IS LOW	e3		260	19.175 mm	10H
MC74VHC74MELG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.3	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	3	5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	10.2 mm	AHC/VHC

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.