Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC10EL35DTG	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	RAIL	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.7 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	S-PDSO-G8	3	5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	3 mm	10EL
MC100EP52DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.38 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	4.9 mm	100E
MC10153FN	Onsemi	D LATCH	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		ECL		2					CHIP CARRIER	LDCC20,.4SQ	5.6 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	-30 Cel	Tin/Lead (Sn80Pb20)	QUAD		S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE		83 mA		e0			8.965 mm	10K
MC74HCT74AD	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		1	RAIL	5	5	50 pF	SMALL OUTLINE	SOP14,.25	36 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	20 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0		235	8.65 mm	HCT
MC10H130P	Onsemi	D LATCH	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		ECL		2					IN-LINE	DIP16,.3	1.7 ns		FF/Latches	2.54 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	DUAL		R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY				e0		235	19.175 mm	10H
MC14013BFR1	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE	SOP14,.3	350 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G14		18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4		260	10.2 mm	4000/14000/40000
MC10231FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	200000000 Hz	ECL		1	TR		-5.2		CHIP CARRIER	LDCC20,.4SQ	3.3 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-30 Cel	Tin/Lead (Sn80Pb20)	QUAD	200 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		72 mA		e0			8.965 mm	10K
MC74ACT74MELG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.3	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14		5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4		260	10.2 mm	ACT
MC74ACT273DW	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	RAIL	5	5	50 pF	SMALL OUTLINE	SOP20,.4	12 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e0		235	12.8 mm	ACT
MC10H175M	Onsemi	D LATCH	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		5	RAIL				SMALL OUTLINE	SOP16,.3	2 ns		FF/Latches	1.27 mm	75 Cel			LOW LEVEL	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	3		2.05 mm	5.275 mm	Not Qualified	TRUE		107 mA		e4		260	10.2 mm	10H
MC74ACT74DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e3	30	260	8.65 mm	ACT
DM74ALS273SJX	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		TTL		1	TR	5		50 pF	SMALL OUTLINE	SOP20,.3	15 ns			1.27 mm	70 Cel			POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDSO-G20		5.5 V	2.1 mm	5.3 mm		TRUE	4.5 V	29 mA					12.6 mm	ALS
MC100LVEL51DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2900000000 Hz	ECL		1	TR	3.3	-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.52 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2800 MHz	S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e0		235	3 mm	100LVEL
MC10E154FNR2G	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	5	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	91 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC74AC273DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8		5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	14.5 ns	12 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4		260	6.5 mm	AC
MM74HCT273SJ	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	21000000 Hz	CMOS		8		5	5	50 pF	SMALL OUTLINE	SOP20,.3	46 ns	4 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		DUAL	21 MHz	R-PDSO-G20		5.5 V	2.1 mm	5.3 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.6 mm	HCT
MC74ACT109MR2	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		2	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.3	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G16		5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0			10.2 mm	ACT
MC100E212FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		3		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	1.025 ns		Other Logic ICs	1.27 mm	85 Cel			POSITIVE EDGE	0 Cel	TIN LEAD	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			11.505 mm	100E
MC14076BDR2	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1800000 Hz	CMOS		4	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	600 ns		FF/Latches	1.27 mm	125 Cel		3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	6 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e0		235	9.9 mm	4000/14000/40000
MC10131FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	125000000 Hz	ECL		1	TR		-5.2		CHIP CARRIER	LDCC20,.4SQ	4.5 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-30 Cel	TIN LEAD	QUAD	125 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		62 mA	WITH ADDITIONAL COMMON CLOCK	e0		235	8.965 mm	10K
MC100EL51MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	1800000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.565 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL GOLD PALLADIUM	DUAL	2200 MHz	S-XDSO-N8	1	5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	36 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V			260	2 mm	100EL
MC74VHCT74AD	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS		1	RAIL	5	5	50 pF	SMALL OUTLINE	SOP14,.25	10 ns	8 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0	NOT SPECIFIED	NOT SPECIFIED	8.65 mm	AHCT/VHCT/VT
MC74AC377M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8		5	3.3/5	50 pF	SMALL OUTLINE	SOP20,.3	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	125 MHz	R-PDSO-G20		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e0			12.575 mm	AC
MC14013BBF	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz			1		5		50 pF	SMALL OUTLINE	SOP14,.3	350 ns			1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel		DUAL	7 MHz	R-PDSO-G14		18 V	2.05 mm	5.275 mm		COMPLEMENTARY	3 V						10.2 mm	4000/14000/40000
MC100LVEL31MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2900000000 Hz	ECL		1	TR	3.3	-3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.59 ns		FF/Latches	.5 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2900 MHz	S-XDSO-N8		3.8 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	38 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3			2 mm	100LVEL
MC74AC175DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	139000000 Hz	CMOS		4	TR	5	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	14.5 ns	12 Amp	FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel		DUAL	187 MHz	R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V						5 mm	AC
MC74ACT273MG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	RAIL	5	5	50 pF	SMALL OUTLINE	SOP20,.3	12 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	3	5.5 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.5 V			e4		260	12.575 mm	ACT
MC74ACT377MEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	125000000 Hz	CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3	11 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20		5.5 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.5 V			e4		260	12.575 mm	ACT
MC14076BD	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1800000 Hz	CMOS		4	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	600 ns		FF/Latches	1.27 mm	125 Cel		3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	6 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e0		235	9.9 mm	4000/14000/40000
MC10EP451FAR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		6		3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.55 ns		Shift Registers	.8 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	TIN	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	10E
MC10H130PG	Onsemi	D LATCH	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		ECL		2					IN-LINE	DIP16,.3	1.7 ns		FF/Latches	2.54 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	DUAL		R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY				e3		260	19.175 mm	10H
MC10EL35DTR2G	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.7 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	1800 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	10EL
MC74ACT373MR1	Onsemi	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3		24 Amp	FF/Latches	1.27 mm	85 Cel		3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC74AC109N	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	100000000 Hz	CMOS		2		5	3.3/5	50 pF	IN-LINE	DIP16,.3	16 ns	12 Amp	FF/Latches	2.54 mm	85 Cel			POSITIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDIP-T16		6 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V						19.175 mm	AC
MM74HC374NX	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8	35 Hz	CMOS		1	TR	4.5		150 pF	IN-LINE	DIP20,.3	288 ns	7.8 Amp		2.54 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20		6 V	5.08 mm	7.62 mm		TRUE	2 V	.08 mA					26.075 mm	HC/UH
MC10EP35DR2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		2	TR	3.3	-5.2		SMALL OUTLINE	SOP8,.25	.49 ns		FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	4.9 mm	10E
MC14099BCP	Onsemi	D LATCH	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		1	RAIL	5	5/15	50 pF	IN-LINE	DIP16,.3	400 ns		FF/Latches	2.54 mm	125 Cel			LOW LEVEL	-55 Cel	TIN LEAD	DUAL		R-PDIP-T16		18 V	4.44 mm	7.62 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH	e0		235	19.175 mm	4000/14000/40000
SN74LS74AML1	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	TTL			TR	5	5		SMALL OUTLINE	SOP14,.3		8 Amp	FF/Latches	1.27 mm	70 Cel			POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G14					Not Qualified			8 mA		e4
MC74VHCT74AM	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS		1		5	5	50 pF	SMALL OUTLINE	SOP14,.3	10 ns	8 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	80 MHz	R-PDSO-G14		5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0			10.2 mm	AHCT/VHCT
MC10EL52DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	2200000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.465 ns		FF/Latches	.65 mm	85 Cel			POSITIVE EDGE	-40 Cel	TIN	DUAL	2200 MHz	S-PDSO-G8		5.7 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	4.2 V	25 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	3 mm	10EL
MC10EP131FAG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4	TRAY	3.3	-5.2		FLATPACK, LOW PROFILE	QFP32,.35SQ,32	.6 ns		FF/Latches	.8 mm	85 Cel			POSITIVE EDGE	-40 Cel	MATTE TIN	QUAD		S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V	120 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	7 mm	10E
MC14013BFL1	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		1	TR	5	5/15	50 pF	SMALL OUTLINE	SOP14,.3	350 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDSO-G14		18 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	3 V			e4		260	10.2 mm	4000/14000/40000
MC74ACT373DTEL	Onsemi	D LATCH	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		24 Amp	FF/Latches	.635 mm	85 Cel		3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC100EL30DWR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		3	TR	5	-4.5		SMALL OUTLINE	SOP20,.4	.82 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1200 MHz	R-PDSO-G20	1	5.7 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	12.8 mm	100EL
MC74ACT74ML1	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.3	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G14		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V			e4				ACT
MC74HC174ADR2G	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		6	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	165 ns	4 Amp	FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e3	30	260	9.9 mm	HC/UH
MC14027BDR2	Onsemi	J-K FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	1500000 Hz	CMOS		2	TR	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	350 ns		FF/Latches	1.27 mm	125 Cel			POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	6.5 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V			e0		235	9.9 mm	4000/14000/40000
MC10E156FNG	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.