Onsemi Latches & Flip-Flops 1,175

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC100E143FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9		5			CHIP CARRIER		1 ns			1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin/Lead (Sn80Pb20)	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0	30	235	11.505 mm	100E
MC74AC259DR2	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	17 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e0		235	9.9 mm	AC
MC74ACT109M	Onsemi	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		2	RAIL	5	5	50 pF	SMALL OUTLINE	SOP16,.3	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G16		5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4			10.2 mm	ACT
MC10EP52DTR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	TR	3.3	-5.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	10E
74LVX273MTCX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS		8	TR	2.7	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	24 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	6.5 mm	LV/LV-A/LVX/H
MC74ACT74MR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.3	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G14		5.5 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0			10.2 mm	ACT
MM74HCT74N	Onsemi	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		1		5		50 pF	IN-LINE	DIP14,.3	44 ns				85 Cel		POSITIVE EDGE	-40 Cel		DUAL	21 MHz	R-PDIP-T14		5.5 V				COMPLEMENTARY	4.5 V							HCT
MC10131L	Onsemi	D FLIP-FLOP	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2	125000000 Hz	ECL		1			-5.2		IN-LINE	DIP16,.3	4.5 ns		FF/Latches	2.54 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-30 Cel	Tin/Lead (Sn/Pb)	DUAL	125 MHz	R-GDIP-T16			5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY		62 mA	WITH ADDITIONAL COMMON CLOCK	e0			19.495 mm	10K
MC10168FN	Onsemi	D LATCH	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4					CHIP CARRIER		6.2 ns			1.27 mm	85 Cel	OPEN-EMITTER	HIGH LEVEL	-30 Cel	TIN LEAD	QUAD		S-PQCC-J20			4.57 mm	8.9662 mm	Not Qualified	TRUE				e0			8.9662 mm	10K
MC100LVEL51DTR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		1	TR	3.3	-3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.52 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2800 MHz	S-PDSO-G8	3	3.8 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	3 mm	100LVEL
MC74ACT74DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS		1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.25	13 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0		235	8.65 mm	ACT
MC74VHC373ML1	Onsemi	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR		2/5.5	50 pF	SMALL OUTLINE	SOP20,.3		8 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC100EP52DT	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	1	4000000000 Hz	ECL		1	RAIL	3.3	-4.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.38 ns		FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-PDSO-G8		5.5 V	1.1 mm	3 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	3 mm	100E
MC74LVX74MG	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	50000000 Hz	CMOS		1	RAIL	2.7	3.3	50 pF	SMALL OUTLINE	SOP14,.3	22 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G14		3.6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	LV/LV-A/LVX/H
MC10134L	Onsemi	D LATCH	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		ECL		1					IN-LINE		5.7 ns			2.54 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	-30 Cel	TIN LEAD	DUAL		R-GDIP-T16			5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY			2:1 MUX FOLLOWED BY LATCH; WITH ADDITIONAL COMMON LATCH ENABLE	e0			19.495 mm	10K
MC74VHC573ML1	Onsemi	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR		2/5.5	50 pF	SMALL OUTLINE	SOP20,.3		8 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
MC10H173FN	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	4					CHIP CARRIER	LDCC20,.4SQ	3.7 ns		Multiplexer/Demultiplexers	1.27 mm	75 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	Tin/Lead (Sn80Pb20)	QUAD		S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE		73 mA	FOUR 2:1 MUX FOLLOWED BY LATCH	e0			8.965 mm	10H
MC100EP35MNR4	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	3000000000 Hz	ECL		2	TR	3.3	-4.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.49 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		S-XDSO-N8		5.5 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	3 V	50 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0			2 mm	100E
MC14076BDG	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1800000 Hz	CMOS		4	RAIL	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	600 ns		FF/Latches	1.27 mm	125 Cel	3-STATE	POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	6 MHz	R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3	30	260	9.9 mm	4000/14000/40000
MC14042BFL1	Onsemi	D LATCH	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		1	TR		5/15	50 pF	SMALL OUTLINE	SOP16,.3			FF/Latches	1.27 mm	125 Cel			-55 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified					e0
MC10E131FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL		4		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.675 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin/Lead (Sn80Pb20)	QUAD	1100 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	70 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0	30	235	11.505 mm	10E
MC100E131FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL		4	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.675 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	81 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
SN74LS74AMR2	Onsemi	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	TTL			TR	5	5		SMALL OUTLINE	SOP14,.3		8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified			8 mA		e0
MC10EL31MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2000000000 Hz	ECL		1	TR	5	-5.2		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.59 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3			2 mm	10EL
MC74AC175D	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	139000000 Hz	CMOS		4		5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	187 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	9.9 mm	AC
MC74AC373DTEL	Onsemi	D LATCH	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	TR		3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		12 Amp	FF/Latches	.635 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G20					Not Qualified		3 V			e4
MC10E143FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9		5			CHIP CARRIER		1 ns			1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC74AC273ML1	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS		8	TR	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	125 MHz	R-PDSO-G20		6 V			Not Qualified	TRUE	2 V			e0				AC
MC100EL31MNR4G	Onsemi	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	1	2000000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	.59 ns		FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	2200 MHz	S-XDSO-N8		5.7 V	1 mm	2 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3			2 mm	100EL
MC74AC175ML1	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	139000000 Hz	CMOS			TR		3.3/5	50 pF	SMALL OUTLINE	SOP16,.3		12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified					e0
MC100EL31DR2	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2000000000 Hz	ECL		1	TR	5	-4.5		SMALL OUTLINE	SOP8,.25	.59 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	2200 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	37 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	4.9 mm	100EL
MC100E131FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL		4		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.675 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin/Lead (Sn80Pb20)	QUAD	1100 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	81 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0	30	235	11.505 mm	100E
MC74AC259M	Onsemi	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1	RAIL	5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	17 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4		260	10.2 mm	AC
MM74HC175MX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		4	TR		2/6	50 pF	SMALL OUTLINE	SOP16,.25	190 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	70 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	9.9 mm	HC/UH
MC10EL35DR2	Onsemi	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1400000000 Hz	ECL		2	TR	5	-5.2		SMALL OUTLINE	SOP8,.25	.7 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	1800 MHz	R-PDSO-G8		5.7 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.2 V	32 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	4.9 mm	10EL
74LVX273SJX	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS		1		2.7			SMALL OUTLINE		24 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G20		3.6 V	2.1 mm	5.3 mm		TRUE	2 V		INPUTS CAN BE DRIVEN BY 3V OR 5V COMPONENTS				12.6 mm	LV/LV-A/LVX/H
MC74HC273AH	Onsemi	D FLIP-FLOP	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8		3			IN-LINE		220 ns			2.54 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	24 MHz	R-PDIP-T20		6 V	4.31 mm	7.62 mm	Not Qualified	TRUE	2 V			e0			24.13 mm	HC/UH
MC74VHCT74ADT	Onsemi	D FLIP-FLOP	MILITARY	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS		1	RAIL	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	10 ns	8 Amp	FF/Latches	.65 mm	125 Cel		POSITIVE EDGE	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	NOT SPECIFIED	NOT SPECIFIED	5 mm	AHCT/VHCT/VT
MC10134P	Onsemi	D LATCH	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		ECL		1					IN-LINE		5.7 ns			2.54 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	-30 Cel	TIN LEAD	DUAL		R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY			2:1 MUX FOLLOWED BY LATCH; WITH ADDITIONAL COMMON LATCH ENABLE	e0			19.175 mm	10K
MM74HC74ASJ	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		5			SMALL OUTLINE		140 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14		6 V	2.1 mm	5.3 mm		COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	HC/UH
MC10H176FNR2	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		6	TR				CHIP CARRIER	LDCC20,.4SQ	2.2 ns		FF/Latches	1.27 mm	75 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	250 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE		123 mA		e0		235	8.965 mm	10H
MC10E150FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6	TR	5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	900 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	62 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC100EP31DR2G	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	3000000000 Hz	ECL		1	TR	3.3	-4.5		SMALL OUTLINE	SOP8,.25	.41 ns		FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN	DUAL		R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	47 mA	NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V	e3	30	260	4.9 mm	100E
MC74AC175M	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	139000000 Hz	CMOS		4		5	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	14.5 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	187 MHz	R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e0			10.2 mm	AC
SN74LS259M	Onsemi	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL		1		5	5		SMALL OUTLINE	SOP16,.3	32 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		LOW LEVEL	0 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16		5.25 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.75 V	36 mA	1:8 DMUX FOLLOWED BY LATCH	e4			10.2 mm	LS
MC100E175FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.5 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	152 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.5V	e0		235	11.505 mm	100E
MC74LCX74MEL	Onsemi	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS		1	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP14,.3	8.4 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G14		3.6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4		260	10.2 mm	LVC/LCX/Z
MC10H173P	Onsemi	D LATCH	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		ECL	2	4					IN-LINE	DIP16,.3	3.7 ns		Multiplexer/Demultiplexers	2.54 mm	75 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	DUAL		R-PDIP-T16			4.44 mm	7.62 mm	Not Qualified	TRUE		73 mA	FOUR 2:1 MUX FOLLOWED BY LATCH	e0	30	235	19.175 mm	10H

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.