8 Multiplexers & Switches 1,790

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
MXDG418DY	Analog Devices	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1		GULL WING	-20 V				SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	20 V	1.75 mm		3.9 mm	Not Qualified			5 V		-5 V	e0					35 ohm			4.9 mm
MXDG419DK	Analog Devices	SPDT	INDUSTRIAL	8	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	1		THROUGH-HOLE	-20 V				IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-GDIP-T8			20 V	5.08 mm		7.62 mm	Not Qualified			5 V		-5 V	e0					35 ohm
MXDG417DJ	Analog Devices	SPST	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1		THROUGH-HOLE	-20 V				IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8			20 V	4.572 mm		7.62 mm	Not Qualified			5 V		-5 V	e0					35 ohm			9.375 mm
MXDG418AK	Analog Devices	SPST	MILITARY	8	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	1		THROUGH-HOLE	-20 V				IN-LINE			2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T8			20 V	5.08 mm		7.62 mm	Not Qualified			5 V		-5 V	e0					35 ohm
MXDG418DJ	Analog Devices	SPST	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1		THROUGH-HOLE	-20 V				IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8			20 V	4.572 mm		7.62 mm	Not Qualified			5 V		-5 V	e0					35 ohm			9.375 mm
MXDG417DY	Analog Devices	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1		GULL WING	-20 V				SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	20 V	1.75 mm		3.9 mm	Not Qualified			5 V		-5 V	e0					35 ohm			4.9 mm
AD8180AN	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	4.75 mA	1	2	BIPOLAR	THROUGH-HOLE	-6 V	-5 V	5 V	+-5	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8			6 V	5.33 mm		7.62 mm	Not Qualified		89 dB	4 V		-4 V	e0				10 ns				9.88 mm
ADG419BR-REEL	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	16.5 V	1.09 mm		3 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		3 mm
ADG3249BRJ-R2	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS	GULL WING			3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	3.6 V	1.45 mm		1.6 mm	Not Qualified			2.3 V			e0			240		28 ohm		.1 ohm	2.9 mm
ADG822BRM-REEL	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3.6 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	52 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	67 ns	1.4 ohm	18 ns	.16 ohm	3 mm
ADG601BRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8			5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e0	BREAK-BEFORE-MAKE			120 ns	2.5 ohm	75 ns	.35 ohm	3 mm
ADG702LBRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
AD8180AR	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	4.75 mA	1	2	BIPOLAR	GULL WING	-6 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	6 V	1.75 mm		3.9 mm	Not Qualified		89 dB	4 V		-4 V	e0			240	10 ns				4.9 mm
ADG602BRM-REEL7	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e0	BREAK-BEFORE-MAKE		240	120 ns	2.5 ohm	75 ns	.35 ohm	3 mm
ADG722BRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY		e0	BREAK-BEFORE-MAKE		240	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG752BRM	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.09 mm		3 mm	Not Qualified	NO/NC	80 dB	1.8 V	CAN ALSO BE OPERATED FROM 4.5 TO 5.5V		e0	BREAK-BEFORE-MAKE		240	18 ns	50 ohm	8 ns	.2 ohm	3 mm
AD8180ARZ-REEL	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BIPOLAR	GULL WING	-6 V	-5 V	5 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1	6 V	1.75 mm		3.9 mm	Not Qualified		89 dB	4 V		-4 V	e3			260	10 ns				4.9 mm
ADG620BRMZ	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e3	MAKE-BEFORE-BREAK		260	65 ns	6.5 ohm	330 ns	.7 ohm	3 mm
ADG701LBRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	3 mm
ADG1517BCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	NO LEAD			15 V	15	SMALL OUTLINE	SOLCC8,.11,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N8		1	16.5 V	.8 mm		2 mm	Not Qualified	NO	60 dB	5 V			e3	BREAK-BEFORE-MAKE		260	250 ns	1.85 ohm	220 ns		3 mm
ADG723BRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY		e0	BREAK-BEFORE-MAKE		240	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG721BRM-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY		e0	BREAK-BEFORE-MAKE		240	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG620BRT-REEL	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	COMMON OUTPUT		5.5 V	1.45 mm	.05 A	1.6 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e3	MAKE-BEFORE-BREAK			65 ns	6.5 ohm	330 ns	.7 ohm	2.9 mm
ADG801BRMZ-REEL	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	61 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	55 ns	.6 ohm	15 ns		3 mm
ADG822BRMZ	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3.6 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	52 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	67 ns	1.4 ohm	18 ns	.16 ohm	3 mm
ADG719BRM-REEL7	Analog Devices	SPDT	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified		67 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	15 ns	12 ohm	8 ns	.1 ohm	3 mm
ADG3249BRJZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS	GULL WING			3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1	3.6 V	1.45 mm		1.6 mm	Not Qualified			2.3 V			e3			260		28 ohm		.1 ohm	2.9 mm
ADG801BRM-REEL7	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	61 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	55 ns	.6 ohm	15 ns		3 mm
ADG722ACPZ-REEL	Analog Devices	SPST	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS	NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N8	SEPARATE OUTPUT	1	5.5 V	.8 mm		2 mm	Not Qualified	NC	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY		e3	BREAK-BEFORE-MAKE		260	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG601BRMZ-REEL7	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	2.5 ohm	75 ns	.35 ohm	3 mm
ADG419SRMZ-EP-RL7	Analog Devices	SPDT	MILITARY	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8		1	16.5 V	1.1 mm		3 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e4	BREAK-BEFORE-MAKE	30	260	200 ns	35 ohm	200 ns		3 mm
ADG620BRT	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS	GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8			5.5 V	1.45 mm		1.6 mm	Not Qualified		67 dB	2.7 V		-2.7 V	e0	MAKE-BEFORE-BREAK			120 ns	6 ohm	75 ns	.7 ohm	2.9 mm
ADG802BRMZ-REEL	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	61 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	55 ns	.6 ohm	15 ns		3 mm
ADG723BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY		e3	BREAK-BEFORE-MAKE		260	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG417BNZ	Analog Devices	SPST	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	CMOS	THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T8				5.33 mm		7.62 mm	Not Qualified		80 dB				e3				160 ns	35 ohm	100 ns		9.88 mm
AD8170ARZ-R7	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	11 mA	1	2	BIPOLAR	GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified						e3		30	260	17 ns				4.9 mm
ADG601BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	2.5 ohm	75 ns	.35 ohm	3 mm
ADG802BRM	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	61 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	55 ns	.6 ohm	15 ns		3 mm
ADG417BN	Analog Devices	SPST	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	CMOS	THROUGH-HOLE		-15 V	15 V	5,12/+-15	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8				5.33 mm		7.62 mm	Not Qualified	NC	80 dB				e0	BREAK-BEFORE-MAKE			160 ns	35 ohm	100 ns		9.88 mm
ADG702BRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified		55 dB	1.8 V			e0			240	20 ns	5 ohm	13 ns		3 mm
ADG802BRMZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	61 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	55 ns	.6 ohm	15 ns		3 mm
ADG701BRM	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		3 mm
ADG721BRM-REEL7	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY		e0	BREAK-BEFORE-MAKE		240	24 ns	10 ohm	11 ns	.3 ohm	3 mm
ADG619BRT-R2	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS	GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8			5.5 V	1.45 mm		1.6 mm	Not Qualified		67 dB	2.7 V		-2.7 V	e0	BREAK-BEFORE-MAKE			120 ns	6 ohm	75 ns	.7 ohm	2.9 mm
AD8170AN	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	11 mA	1	2	BIPOLAR	THROUGH-HOLE		-5 V	5 V	+-5	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T8				5.33 mm		7.62 mm	Not Qualified						e0				17 ns				9.88 mm
ADG620BRTZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.45 mm	.05 A	1.6 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e4	MAKE-BEFORE-BREAK		260	65 ns	6.5 ohm	330 ns	.7 ohm	2.9 mm
AD8170AR	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	11 mA	1	2	BIPOLAR	GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified						e0			240	17 ns				4.9 mm
ADG823BRM-REEL7	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			3.6 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	52 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	67 ns	1.4 ohm	18 ns	.16 ohm	3 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.