DIFFERENTIAL MULTIPLEXER Multiplexers & Switches 2,212

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG509AKPZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	22.5 ohm	8.965 mm
ADG509AKNZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	5.33 mm	.02 A	7.62 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	22.5 ohm	20.07 mm
ADGS1209BCPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	24	HVQCCN	SQUARE	YES	UNSPECIFIED		2	4	CMOS		NO LEAD	-16.5 V	-15 V	15 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel		QUAD	S-XQCC-N24		3	16.5 V	.8 mm		4 mm			85 dB	4.5 V	ALSO HAS LOGIC POWER SUPPLY= 2.7V TO 5.5V		-4.5 V			30	260	155 ns	200 ohm	190 ns	3.5 ohm	4 mm
LTC1393IS	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING			5 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB					e0				1500 ns	140 ohm	1200 ns	28 ohm	9.9 mm
ADG509AKPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	22.5 ohm	8.965 mm
ADG1407YCPZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED	.42 mA	1	8	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32			5.5 V	1 mm	.03 A	5 mm	Not Qualified		70 dB	4.5 V	ALSO OPERATES AT +12 AND +/-15 V SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE			440 ns		440 ns	1 ohm	5 mm
ADG507AKRUZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	16.5 V	1.1 mm		4.4 mm			68 dB	10.8 V			-10.8 V	e3		30	260	400 ns	300 ohm	400 ns	15 ohm	9.7 mm
ADG439FBRWZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	4	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		2.65 mm	.02 A	7.5 mm	Not Qualified		93 dB					e3	BREAK-BEFORE-MAKE	30	260	345 ns	270 ohm	173 ns	8.1 ohm	10.3 mm
ADG407BNZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.5 mA	1	8	BICMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T28			16.5 V	6.35 mm	.02 A	15.24 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE			150 ns	80 ohm	150 ns	4 ohm	37.4 mm
ADV3221ARZ-R7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	8 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1					Not Qualified							e3		30	260
ADG659YCPZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	4	CMOS		NO LEAD	-6 V	-5 V	5 V	3/5/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	6 V	1 mm	.02 A	4 mm	Not Qualified	NC	90 dB	2 V	ALSO OPERATE WITH 2 V TO 12 V		-2 V	e3	BREAK-BEFORE-MAKE		260	490 ns	400 ohm	110 ns	2 ohm	4 mm
ADG507ABQ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	1.5 mA	1	8	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-GDIP-T28			16.5 V	5.59 mm	.02 A	15.24 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	22.5 ohm
ADG507ATE	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	28	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	1.5 mA	1	8	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LCC28,.45SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	TIN LEAD	QUAD	S-CQCC-N28			16.5 V	2.54 mm	.02 A	11.43 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	22.5 ohm	11.43 mm
ADG509FTQ/883B	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC	.2 mA	1	4	CMOS	38535Q/M;38534H;883B	THROUGH-HOLE				12/15,GND/-12/-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16					.02 A		Not Qualified							e0	BREAK-BEFORE-MAKE			250 ns	450 ohm
ADG509FBNZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	4	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16			16.5 V	5.33 mm	.02 A	7.62 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE			300 ns	390 ohm	150 ns	8.1 ohm	20.07 mm
ADG407BN	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	BICMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T28			16.5 V	6.35 mm	.02 A	15.24 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE			150 ns	80 ohm	150 ns	4 ohm	37.4 mm
5962-8771801EX	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	4	JFET		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel		DUAL	R-GDIP-T16				5.08 mm		7.62 mm	Not Qualified		66 dB						BREAK-BEFORE-MAKE				300 ohm		15.4 ohm	19.05 mm
ADG709CRU-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	2.75 V	1.2 mm	.03 A	4.4 mm	Not Qualified		60 dB	2.25 V	ALSO OPERATE WITH 1.8V TO 5.5V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE	30	240	25 ns	4.5 ohm	15 ns	.4 ohm	5 mm
ADG439FBR	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		93 dB		FAULT PROTECTED; OVERVOLTAGE PROTECTION			e0	BREAK-BEFORE-MAKE		240	345 ns	270 ohm	173 ns	8.1 ohm	9.9 mm
ADG409BRU-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	4	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.2 mm		4.4 mm	Not Qualified		75 dB		CAN ALSO OPERATE WITH 12V SUPPLY			e0	BREAK-BEFORE-MAKE	30	240	150 ns	100 ohm	150 ns	15 ohm	5 mm
ADG1407YRUZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.42 mA	1	8	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-5/12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	5.5 V	1.2 mm	.03 A	4.4 mm	Not Qualified		70 dB	4.5 V	ALSO OPERATES AT +12 AND +/-15 V SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE			440 ns		440 ns	1 ohm	9.7 mm
ADG439FBRW	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		2.65 mm	.02 A	7.5 mm	Not Qualified		93 dB		FAULT PROTECTED; OVERVOLTAGE PROTECTION			e0	BREAK-BEFORE-MAKE		240	345 ns	270 ohm	173 ns	8.1 ohm	10.3 mm
5962-8971002XA	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	28	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	1.5 mA	1	8	CMOS		THROUGH-HOLE		-15 V	15 V	12/15,GND/-12/-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin/Lead (Sn63Pb37)	DUAL	R-GDIP-T28				5.72 mm	.04 A	15.24 mm	Not Qualified							e0	BREAK-BEFORE-MAKE			400 ns	450 ohm	400 ns
ADG429TCHIPS	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY		DIE	UNSPECIFIED	YES	UNSPECIFIED		1	4	CMOS		NO LEAD		-15 V	15 V		UNCASED CHIP				125 Cel	-55 Cel	TIN LEAD	UPPER	X-XUUC-N							Not Qualified		75 dB					e0				150 ns	100 ohm	150 ns	10 ohm
LTC1393CGN#TRPBF	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING			5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB					e3			260	1500 ns	140 ohm	1200 ns	28 ohm	4.9 mm
AD7502KP	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	1	4	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.02 A	8.9662 mm	Not Qualified							e0					300 ohm		6.8 ohm	8.9662 mm
ADGS1409BCPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	24	HVQCCN	SQUARE	YES	UNSPECIFIED	.02 mA	2	4	CMOS		NO LEAD	-16.5 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		.5 mm	125 Cel	-40 Cel		QUAD	S-XQCC-N24			16.5 V	1 mm	47.2 A	4 mm			64 dB	4.5 V	ALSO OPERATE WITH +/-15 V AND 12 V SUPPLY RANGES	-5 V	-4.5 V		BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	570 ns	12 ohm	400 ns	.3 ohm	4 mm	5 V
ADG529AKN	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	18	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V	12/+-15	IN-LINE	DIP18,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T18			16.5 V	4.57 mm	.02 A	7.62 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	5 ohm	21.97 mm
ADG709CRUZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	2.75 V	1.2 mm	.03 A	4.4 mm	Not Qualified		60 dB	2.25 V	ALSO OPERATE WITH 1.8V TO 5.5V SINGLE SUPPLY		-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	25 ns	4.5 ohm	15 ns	.4 ohm	5 mm
ADG527ATQ	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	28	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	1.5 mA	1	8	CMOS		THROUGH-HOLE		-15 V	15 V	12/15,GND/-12/-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T28			16.5 V	5.59 mm	.02 A	15.24 mm	Not Qualified		68 dB	10.8 V				e0	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	14 ohm
ADG509FBRWZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING	-16.5 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G16		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	40	260	300 ns	390 ohm	150 ns	8.1 ohm	10.3 mm
ADG429BP-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.1 mA	1	4	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.03 A	8.965 mm	Not Qualified		75 dB					e0	BREAK-BEFORE-MAKE			225 ns	100 ohm	300 ns	10 ohm	8.965 mm
ADG609BN	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	4	BICMOS		THROUGH-HOLE	-5.5 V	-5 V	5 V	3/5/+-5	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16			5.5 V	5.33 mm	.02 A	7.62 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE		-4.5 V	e0	BREAK-BEFORE-MAKE			75 ns	30 ohm	75 ns	2 ohm	20.13 mm
ADG439FBRN	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	105 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16				1.75 mm	.02 A	3.9 mm	Not Qualified		80 dB					e0	BREAK-BEFORE-MAKE			220 ns	400 ohm	220 ns		9.9 mm
ADG509AKR	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e0	BREAK-BEFORE-MAKE		240	300 ns	450 ohm	300 ns	22.5 ohm	9.9 mm
5962-9204204M2X	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	20	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		1	4	CMOS	MIL-STD-883	NO LEAD		-15 V	15 V		CHIP CARRIER			1.27 mm	125 Cel	-55 Cel	GOLD	QUAD	S-CQCC-N20				2.54 mm		8.89 mm	Not Qualified		75 dB					e4				150 ns	100 ohm	150 ns	15 ohm	8.89 mm
ADG659YRQ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	6 V	1.7526 mm	.02 A	3.9116 mm	Not Qualified		90 dB	2 V	ALSO OPERATE WITH 2 V TO 12 V		-2 V	e0	BREAK-BEFORE-MAKE		240	165 ns	75 ohm	55 ns	1.3 ohm	4.9022 mm
ADG527ATQ/883B	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	28	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	1.5 mA	1	8	CMOS	MIL-STD-883 Class B	THROUGH-HOLE		-15 V	15 V	12/15,GND/-12/-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T28			16.5 V	5.59 mm	.03 A	15.24 mm	Not Qualified		50 dB	10.8 V				e0	BREAK-BEFORE-MAKE			400 ns	300 ohm	400 ns	14 ohm
ADG529ATQ/883B	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	18	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	1.5 mA	1	4	CMOS	MIL-STD-883 Class B	THROUGH-HOLE		-15 V	15 V	12/+-15	IN-LINE	DIP18,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T18			16.5 V	5.08 mm	.03 A	7.62 mm	Not Qualified		50 dB	10.8 V				e0	BREAK-BEFORE-MAKE			400 ns	300 ohm	400 ns	14 ohm
ADG509ATE/883	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	20	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		1	4	CMOS	MIL-STD-883	NO LEAD	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	125 Cel	-55 Cel		QUAD	S-CQCC-N20			16.5 V	2.54 mm		8.89 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V					400 ns	450 ohm	400 ns	22.5 ohm	8.89 mm
ADG527AKR	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28			16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e0	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	5 ohm	12.8 mm
ADG659YCP	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	4	CMOS		NO LEAD	-6 V	-5 V	5 V	3/5/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16		3	6 V	1 mm	.02 A	4 mm	Not Qualified		90 dB	2 V	ALSO OPERATE WITH 2 V TO 12 V		-2 V	e0	BREAK-BEFORE-MAKE		240	165 ns	75 ohm	55 ns	1.3 ohm	4 mm
ADG5207BCPZ-RL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	32	QCCN	SQUARE	YES	PLASTIC/EPOXY	.13 mA	1	4	BICMOS		NO LEAD				+-9/+-22/9/40	CHIP CARRIER	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N32		3			.105 A		Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	370 ns	700 ohm
ADG509FBRUZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING	-16.5 V	-15 V	15 V	+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm	.02 A	4.4 mm	Not Qualified		93 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	390 ohm	150 ns	8.1 ohm	5 mm
AD7502SD883B	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	.8 mA	1	4	CMOS	MIL-STD-883 Class B	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T16				4.32 mm	.035 A	7.62 mm	Not Qualified							e0				2000 ns	300 ohm		12 ohm	20.09 mm
ADG407BPZ-RL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.5 mA	1	8	BICMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
LTC1393IS#PBF	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING			5 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB					e3		30	260	1500 ns	140 ohm	1200 ns	28 ohm	9.9 mm
LTC1393IGN#TRPBF	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING			5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB					e3			260	1500 ns	140 ohm	1200 ns	28 ohm	4.9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.