DIFFERENTIAL MULTIPLEXER Multiplexers & Switches 2,212

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
ADG659YRU	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	6 V	1.2 mm	.02 A	4.4 mm	Not Qualified	NC	90 dB	2 V	ALSO OPERATE WITH 2 V TO 12 V	-2 V	e0	BREAK-BEFORE-MAKE		240	490 ns	400 ohm	110 ns	2 ohm	5 mm
ADG507AKR-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G28		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e0	BREAK-BEFORE-MAKE	30	240	300 ns	450 ohm	300 ns	22.5 ohm	17.9 mm
ADG509AKP-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY	-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	22.5 ohm	8.965 mm
5962-9063502MVA	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	18	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	1.5 mA	1	4	CMOS	MIL-STD-883	THROUGH-HOLE		-15 V	15 V	12/+-15	IN-LINE	DIP18,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T18				5.08 mm	.03 A	7.62 mm	Not Qualified		50 dB				e0	BREAK-BEFORE-MAKE			400 ns	300 ohm	400 ns
ADG709CRU	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	2.75 V	1.2 mm	.03 A	4.4 mm	Not Qualified		60 dB	2.25 V	ALSO OPERATE WITH 1.8V TO 5.5V SINGLE SUPPLY	-2.25 V	e0	BREAK-BEFORE-MAKE	30	240	25 ns	4.5 ohm	15 ns	.4 ohm	5 mm
ADG429TQ/883B	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	18	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	.1 mA	1	4	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP18,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T18				5.08 mm	.03 A	7.62 mm	Not Qualified		75 dB				e0	BREAK-BEFORE-MAKE			250 ns	100 ohm	250 ns
ADG429BN	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	18	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.1 mA	1	4	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP18,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T18				4.48 mm	.03 A	7.62 mm	Not Qualified		75 dB				e0	BREAK-BEFORE-MAKE			225 ns	100 ohm	300 ns	10 ohm	22.865 mm
ADG407BP-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	BICMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		225	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
ADG659YRQ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	6 V	1.7526 mm	.02 A	3.9116 mm	Not Qualified		90 dB	2 V	ALSO OPERATE WITH 2 V TO 12 V	-2 V	e0	BREAK-BEFORE-MAKE		240	165 ns	75 ohm	55 ns	1.3 ohm	4.9022 mm
ADG509FBRW	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	4	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G16		1	16.5 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION	-13.5 V	e0	BREAK-BEFORE-MAKE	30	240	400 ns	400 ohm	400 ns	20 ohm	10.3 mm
5962-8771802EX	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	4	JFET		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel		DUAL	R-GDIP-T16				5.08 mm		7.62 mm	Not Qualified		66 dB					BREAK-BEFORE-MAKE				400 ohm		27 ohm	19.05 mm
AD7502JN	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.8 mA	1	4	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T16				5.33 mm	.02 A	7.62 mm	Not Qualified						e0					300 ohm		6.8 ohm	19.05 mm
ADG1309BRUZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	4	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm	.03 A	4.4 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	210 ohm	150 ns	5 ohm	5 mm
ADG439FBNZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.2 mA	1	4	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16				5.33 mm	.02 A	7.62 mm	Not Qualified		93 dB		FAULT PROTECTED; OVERVOLTAGE PROTECTION		e3	BREAK-BEFORE-MAKE			345 ns	270 ohm	173 ns	8.1 ohm	20.07 mm
ADG759BCP-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	4	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	+-3/1.8/5.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N20		3	2.75 V	.9 mm	.03 A	4 mm	Not Qualified		60 dB	2.25 V	ALSO OPERATE WITH 1.8V TO 5.5V SINGLE SUPPLY	-2.25 V	e0	BREAK-BEFORE-MAKE		240	25 ns	4.5 ohm	15 ns	.4 ohm	4 mm
MAX307EPI+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T28		1	20 V	5.08 mm		15.24 mm	Not Qualified		69 dB	4.5 V	CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX	-4.5 V	e3		30	260	200 ns	100 ohm	150 ns	1.5 ohm	36.83 mm
DG407DN+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.02 A	11.505 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	245	400 ns	100 ohm	300 ns	1.5 ohm	11.505 mm
MAX4582CEE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	4	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.73 mm	.02 A	3.9 mm	Not Qualified		73 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	80 ohm	100 ns	1 ohm	4.89 mm
DG409EUE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	2	4	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.1 mm	.03 A	4.4 mm	Not Qualified		75 dB	5 V		-5 V	e3	BREAK-BEFORE-MAKE	30	260	225 ns	100 ohm	300 ns	1.5 ohm	5 mm
MAX4519CSD+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS		GULL WING	-8 V	-5 V	5 V		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14		1	8 V	1.75 mm		3.9 mm	Not Qualified		75 dB	2.7 V		-2.7 V	e3		30	260	150 ns	100 ohm	150 ns	4 ohm	8.65 mm
MAX4782EUE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			1.8 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	3.6 V	1.1 mm	.01 A	4.4 mm	Not Qualified		75 dB	1.6 V			e3	BREAK-BEFORE-MAKE	30	260	25 ns	1 ohm	15 ns	.3 ohm	5 mm
MAX337CAI+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.11 mA	1	8	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP28,.4	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28		1		1.99 mm	.03 A	5.29 mm	Not Qualified		82 dB				e3	BREAK-BEFORE-MAKE	30	260	500 ns	400 ohm	500 ns	5 ohm	10.2 mm
DG407DN+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		2	8	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.02 A	11.505 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	245	200 ns	100 ohm	150 ns	1.5 ohm	11.505 mm
DG407CWI+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	8	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28		1	20 V	2.65 mm	.02 A	7.5 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	100 ohm	150 ns	1.5 ohm	17.9 mm
MAX4582EUE+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	4	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.1 mm	.02 A	4.4 mm	Not Qualified		73 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	80 ohm	100 ns	1 ohm	5 mm
MAX307EUI/GG8	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	8	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G28			20 V	1.1 mm		4.4 mm			69 dB	4.5 V	CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX	-4.5 V			NOT SPECIFIED	NOT SPECIFIED	400 ns	100 ohm	300 ns	1.5 ohm	9.7 mm
MAX397CAI+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS		GULL WING	-8 V	-5 V	5 V	+-2.7/+-8/2.7/16	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28		1	8 V	1.99 mm	.03 A	5.29 mm	Not Qualified		75 dB	3 V		-3 V	e3	BREAK-BEFORE-MAKE	30	260	250 ns	100 ohm	200 ns	1.8 ohm	10.2 mm
MAX339ESE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.75 mm	.03 A	3.9 mm	Not Qualified		75 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	500 ns	400 ohm	500 ns	4 ohm	9.9 mm
MAX4519CPD+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	2	CMOS		THROUGH-HOLE	-8 V	-5 V	5 V		IN-LINE			2.54 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T14		1	8 V	4.572 mm		7.62 mm	Not Qualified		75 dB	2.7 V		-2.7 V	e3		30	260	150 ns	100 ohm	150 ns	4 ohm	19.05 mm
MAX399ESE+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING	-8 V	-5 V	5 V	+-3/+-8/3/15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	8 V	1.75 mm	.03 A	3.9 mm	Not Qualified		75 dB	3 V		-3 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	6 ohm	9.9 mm
DG509ACWE+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	4	CMOS		GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	18 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	1500 ns	350 ohm	1000 ns	10.2 ohm	10.3 mm
MAX309CUE+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.1 mm	.03 A	4.4 mm	Not Qualified		75 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	1.5 ohm	5 mm
DG507AAK+	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	28	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	8	CMOS		THROUGH-HOLE	-18 V	-15 V	15 V		IN-LINE			2.54 mm	125 Cel	-55 Cel		DUAL	R-GDIP-T28			18 V	5.89 mm		15.24 mm	Not Qualified		68 dB	4.5 V		-4.5 V			NOT SPECIFIED	NOT SPECIFIED		400 ohm		16.2 ohm
MAX307CWI+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28		1	20 V	2.65 mm	.03 A	7.5 mm	Not Qualified		69 dB	4.5 V	CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	100 ohm	150 ns	1.5 ohm	17.9 mm
DG407DJ+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1 mA	1	8	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T28		1	20 V	5.08 mm	.03 A	15.24 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	1.5 ohm	36.83 mm
MAX4052ACEE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	4	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	6 ohm	4.9 mm
DG509ACWE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	4	CMOS		GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	18 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	1500 ns	450 ohm	1000 ns	27 ohm	10.3 mm
MAX4531EWP+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	4	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20		1	6 V	2.65 mm	.02 A	7.5 mm	Not Qualified		65 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	100 ns	1 ohm	12.8 mm
DG407DWI	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	8	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28		1	20 V	2.65 mm	.02 A	7.5 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e0	BREAK-BEFORE-MAKE			200 ns	100 ohm	150 ns	1.5 ohm	17.9 mm
MAX4559CEE+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING	-6 V	-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.75 mm		3.9 mm	Not Qualified		96 dB	2 V		-2 V	e3				150 ns	160 ohm	120 ns	2 ohm	4.9 mm
DG509AMY/PR+T	Analog Devices	DIFFERENTIAL MULTIPLEXER																							Matte Tin (Sn) - annealed				1											e3		30	260
MAX4782ETE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	4	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16		1	3.6 V	.8 mm	.01 A	3 mm	Not Qualified		75 dB	1.6 V			e3	BREAK-BEFORE-MAKE	30	260	25 ns	1 ohm	15 ns	.3 ohm	3 mm
MAX309CUE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.1 mm	.03 A	4.4 mm	Not Qualified		75 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	1.5 ohm	5 mm
MAX4618CSE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	4	CMOS		GULL WING			3.3 V	2.5/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	3.6 V	1.75 mm	.075 A	3.9 mm	Not Qualified			3 V			e3	BREAK-BEFORE-MAKE	30	260	20 ns	20 ohm	15 ns		9.9 mm
MAX350CAP+	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.03 mA	2	4	CMOS		GULL WING		-5.5 V	5.5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20		1		1.99 mm	.03 A	5.29 mm	Not Qualified						e3	BREAK-BEFORE-MAKE	30	260	275 ns	100 ohm	150 ns	16 ohm	7.2 mm
MAX4582EEE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	4	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.73 mm	.02 A	3.9 mm	Not Qualified		73 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	80 ohm	100 ns	1 ohm	4.89 mm
MAX4692EGE+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	4	BICMOS		NO LEAD	-5.5 V	-5 V	5 V	3/5/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16		1	5.5 V	.9 mm	.02 A	4 mm	Not Qualified		82 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	90 ns	25 ohm	60 ns	2 ohm	4 mm
MAX307EUI+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28		1	20 V	1.1 mm	.03 A	4.4 mm	Not Qualified		69 dB	4.5 V	CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	100 ohm	150 ns	1.5 ohm	9.7 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.