SQUARE Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADN4605ABPZ	Analog Devices	CROSS POINT SWITCH		352		SQUARE	YES	PLASTIC/EPOXY						BALL					GRID ARRAY						MATTE TIN	BOTTOM	S-PBGA-B352		3					Not Qualified							e3		30	260
MAX4456CQH+D	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J44	SEPARATE OUTPUT	3	5.5 V	4.57 mm		16.5862 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e3				50 ns		35 ns		16.5862 mm
MAX4456CQH-D	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J44	SEPARATE OUTPUT	1	5.5 V	4.57 mm		16.5862 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e0				50 ns		35 ns		16.5862 mm
MAX4734EUB-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			1.8 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	3.6 V	1.1 mm	.15 A	3 mm	Not Qualified		56 dB	1.6 V				e0	BREAK-BEFORE-MAKE		245	30 ns	2 ohm	25 ns		3 mm
MAX4734EUB+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			1.8 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10		1	3.6 V	1.1 mm	.15 A	3 mm	Not Qualified		56 dB	1.6 V				e3	BREAK-BEFORE-MAKE	30	260	30 ns	2 ohm	25 ns		3 mm
ADG1409YCPZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	4	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-15/+12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	5.5 V	1 mm	.03 A	4 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE		260	330 ns	9 ohm	285 ns	.78 ohm	4 mm
AD8111ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm		12 mm	Not Qualified		99 dB	4.5 V			-4.5 V	e3		30	260					12 mm
ADN4612ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	88	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N88		3	2.75 V	.85 mm		12 mm				2.25 V	ALSO REQUIRED ANALOG REFERENCE VOLTAGE 1.6 TO 2V			e3		30	260					12 mm
ADG2128YCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm		5 mm	Not Qualified		64 dB	4.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-4.5 V	e3	MAKE-BEFORE-BREAK	30	260	220 ns	95 ohm	260 ns	4.5 ohm	5 mm
ADG622BRMZ	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
MAX14661ETI+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCN	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	16	BICMOS		NO LEAD				1.8/5	CHIP CARRIER	LCC28,.16SQ,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N28		1			.05 A		Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	25000 ns	12 ohm
ADG1236YCPZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	12	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N12	SEPARATE OUTPUT	3	16.5 V	1 mm		3 mm	Not Qualified		80 dB	13.5 V			-13.5 V	e3	BREAK-BEFORE-MAKE		260	150 ns	190 ohm		3.5 ohm	3 mm
DG612EEN-T1-GE4	Vishay Intertechnology	SPST	AUTOMOTIVE	16	QCCN	SQUARE	YES	UNSPECIFIED		1	4			NO LEAD	-5.5 V				CHIP CARRIER				125 Cel	-40 Cel		QUAD	S-XQCC-N16			5 V							3 V			-5 V			NOT SPECIFIED	NOT SPECIFIED	75 ns	115 ohm	50 ns	2.5 ohm
ISL43640IUZ	Renesas Electronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	4	CMOS		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10		2	12 V	1.1 mm		3 mm			75 dB	2 V				e3		30	260	175 ns	220 ohm	65 ns	1 ohm	3 mm
MAX14589EEWL+T	Analog Devices	DPDT	INDUSTRIAL	9	VFBGA	SQUARE	YES	PLASTIC/EPOXY	.06 mA	1	2	BICMOS		BALL			2.5 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA9,3X3,16		.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER NICKEL	BOTTOM	S-PBGA-B9	COMMON OUTPUT	1	5.5 V	.69 mm		1.26 mm		NC	60 dB	1.6 V		-5.5 V		e2	BREAK-BEFORE-MAKE	30	260	10000000 ns	.38 ohm	2250000 ns	.005 ohm	1.26 mm	5.5 V
MAX4762ETB-T	Maxim Integrated	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		2	1	BICMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-N10	SEPARATE OUTPUT	1	5.5 V	.8 mm		3 mm	Not Qualified	NO/NC	65 dB	1.8 V				e0	BREAK-BEFORE-MAKE		245	80 ns	.85 ohm	70 ns	.05 ohm	3 mm
MAX4762ETB+T	Analog Devices	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		2	1	BICMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N10	SEPARATE OUTPUT	1	5.5 V	.8 mm		3 mm	Not Qualified	NO/NC	65 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	80 ns	.85 ohm	70 ns	.05 ohm	3 mm
MAX4784ETE	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	VQCCN	SQUARE	YES	UNSPECIFIED	.002 mA	4	2	CMOS		NO LEAD			1.8 V	1.8/3	CHIP CARRIER, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16		1	3.6 V	.8 mm	.15 A	3 mm	Not Qualified			1.6 V				e0	BREAK-BEFORE-MAKE		245	30 ns	3 ohm	15 ns		3 mm
MAX4784ETE+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	VQCCN	SQUARE	YES	UNSPECIFIED	.002 mA	4	2	CMOS		NO LEAD			1.8 V	1.8/3	CHIP CARRIER, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16		1	3.6 V	.8 mm	.15 A	3 mm	Not Qualified			1.6 V				e3	BREAK-BEFORE-MAKE	30	260	30 ns	3 ohm	15 ns		3 mm
MAX4903EBL-T	Maxim Integrated	SPDT	INDUSTRIAL	9	VFBGA	SQUARE	YES	PLASTIC/EPOXY		1	1	BICMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA9,3X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	S-PBGA-B9	SEPARATE OUTPUT	1	5.5 V	.67 mm		1.52 mm	Not Qualified	NO	70 dB	1.8 V				e0	BREAK-BEFORE-MAKE		245	100 ns	1 ohm	100 ns	.01 ohm	1.52 mm
MAX4903EBL+T	Analog Devices	SPDT	INDUSTRIAL	9	VFBGA	SQUARE	YES	PLASTIC/EPOXY		1	1	BICMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA9,3X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B9	SEPARATE OUTPUT	1	5.5 V	.67 mm		1.52 mm	Not Qualified	NO	70 dB	1.8 V				e1	BREAK-BEFORE-MAKE	30	260	100 ns	1 ohm	100 ns	.01 ohm	1.52 mm
74LVC1G384GXH	Nexperia	SPST	AUTOMOTIVE	5		SQUARE	YES	PLASTIC/EPOXY		1	2			NO LEAD			1.8 V		SPECIAL SHAPE				125 Cel	-40 Cel	TIN	UNSPECIFIED	S-PXSS-N5		1	5.5 V			.8 mm			46 dB	1.65 V				e3		30	260	15.5 ns	195 ohm	13 ns		.8 mm
AD8114ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16			GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	5.5 V	1.6 mm		14 mm	Not Qualified		90 dB	4.5 V			-4.5 V	e3		30	260					14 mm
ADG659YCPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	4	CMOS		NO LEAD	-6 V	-5 V	5 V	3/5/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	6 V	1 mm	.02 A	4 mm	Not Qualified	NC	90 dB	2 V	ALSO OPERATE WITH 2 V TO 12 V		-2 V	e3	BREAK-BEFORE-MAKE		260	490 ns	400 ohm	110 ns	2 ohm	4 mm
NX3L2467HR,115	NXP Semiconductors	DPDT	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		2		CMOS		NO LEAD				1.5/3.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1					Not Qualified							e4	BREAK-BEFORE-MAKE	30	260	90 ns	4.1 ohm
74LVC1G53DP,125	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.04 mA	1	2	CMOS		GULL WING			2.7 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified		40 dB	1.65 V				e4		30	260	7 ns	35 ohm	7.8 ns		3 mm
HI4-0548/883	Renesas Electronics	DIFFERENTIAL MULTIPLEXER	MILITARY	20	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		1	8	CMOS		NO LEAD		-15 V	15 V		CHIP CARRIER			1.27 mm	125 Cel	-55 Cel	TIN LEAD	QUAD	S-CQCC-N20				2.54 mm		8.89 mm	Not Qualified		68 dB		OVERVOLTAGE PROTECTION			e0				500 ns	1500 ohm	500 ns	105 ohm	8.89 mm
HI4P548-5	Renesas Electronics		COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel		QUAD	S-PQCC-J20					.02 A		Not Qualified								BREAK-BEFORE-MAKE				2000 ohm
ISL83699IRZ	Renesas Electronics	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		NO LEAD			1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16		2	3.6 V	1 mm		3 mm			68 dB	1.65 V				e3		30	260	25 ns	.8 ohm	18 ns		3 mm
ISL84684IR	Renesas Electronics	SPDT	INDUSTRIAL	10	VSON	SQUARE	YES	PLASTIC/EPOXY		2	2	CMOS		NO LEAD			3 V	1.8/3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC10,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-N10		1	3.6 V	.8 mm		3 mm	Not Qualified		68 dB	1.65 V				e0	BREAK-BEFORE-MAKE			20 ns	.4 ohm	12 ns	.03 ohm	3 mm
ISL84684IRZ-T	Renesas Electronics	SPDT	INDUSTRIAL	10	VSON	SQUARE	YES	PLASTIC/EPOXY		2	2	CMOS		NO LEAD			3 V	1.8/3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC10,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N10		2	3.6 V	.8 mm		3 mm	Not Qualified		68 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260	20 ns	.4 ohm	12 ns	.03 ohm	3 mm
HV2705FG-G	Microchip Technology	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	48	LFQFP	SQUARE	YES	PLASTIC/EPOXY	4 mA	1	16			GULL WING			5 V		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.28SQ,20		.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQFP-G48			5.5 V	1.6 mm		7 mm		NO	33 dB	3 V		-30 V		e3				5000 ns	38 ohm	5000 ns	1.9 ohm	7 mm	30 V
HV2733FG-G	Microchip Technology	SPDT		48	LFQFP	SQUARE	YES	PLASTIC/EPOXY	2 mA	1	16	HVCMOS		GULL WING			5 V		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQFP-G48	SEPARATE OUTPUT		5.5 V	1.6 mm	2.5 A	7 mm		NO	33 dB	3 V		-30 V		e3				5000 ns	27 ohm	5000 ns	1.35 ohm	7 mm	190 V
ADG1213YCPZ-500RL7	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	16.5 V	.9 mm		3 mm	Not Qualified		75 dB	13.5 V	ALSO OPERATES AT +12 V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	125 ns	120 ohm		5 ohm	3 mm
ADG1411WBCPZ-REEL	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS	AEC-Q100	NO LEAD	-16.5 V	-5 V	5 V	+-5/12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	16.5 V	1 mm		4 mm	Not Qualified	NC	80 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	510 ns	5.4 ohm	380 ns	.13 ohm	4 mm
ADG1607BCPZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	8	CMOS		NO LEAD	-8 V	-5 V	5 V		CHIP CARRIER	LCC32,.2SQ,20		.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	COMMON OUTPUT	3	8 V	.8 mm	1.1 A	5 mm	Not Qualified		62 dB	3.3 V		-3.3 V	-3.3 V	e3	BREAK-BEFORE-MAKE	30	260	188 ns	7.5 ohm	202 ns	.2 ohm	5 mm	8 V
ADG201HSJPZ	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER	LDCC20,.4SQ		1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1	16.5 V	4.57 mm		8.965 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE		-13.5 V	e3	BREAK-BEFORE-MAKE		260	75 ns	75 ohm	75 ns	1.5 ohm	8.965 mm
ADG407BPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.5 mA	1	8	BICMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
ADG5209BCPZ-RL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY	.13 mA	1	4	BICMOS		NO LEAD				+-9/+-22/9/40	CHIP CARRIER	LCC16,.16SQ,25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16		3			.02 A		Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	275 ns	700 ohm
ADG527AKPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	5 ohm	11.505 mm
ADG774ABCPZ-R2	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	2	CMOS		NO LEAD			3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	3.3 V	.9 mm	.1 A	3 mm			65 dB	2.7 V	ALSO OPERATES WITH SUPPLY VOLTAGE 5V			e3				14 ns	6 ohm	8 ns	.15 ohm	3 mm
ADG801BRMZ	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	61 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	55 ns	.6 ohm	15 ns		3 mm
ADN4604ASVZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HTFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16			GULL WING			3.3 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100		3	3.6 V	1.2 mm		14 mm	Not Qualified			2.7 V				e3		30	260					14 mm
ADN4604ASVZ-RL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HTFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16			GULL WING			3.3 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100		3	3.6 V	1.2 mm		14 mm	Not Qualified			2.7 V				e3		30	260					14 mm
DG1409EEN-T1-GE4	Vishay Intertechnology	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4	CMOS		NO LEAD	-16.5 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel	-40 Cel		QUAD	S-XQCC-N16			16.5 V	.95 mm		4 mm			58 dB	4.5 V			-4.5 V			NOT SPECIFIED	NOT SPECIFIED	230 ns	10 ohm	155 ns	.36 ohm	4 mm
DG1412EEN-T1-GE4	Vishay Intertechnology	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.29 mA	4	1	CMOS		NO LEAD	-15 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		.65 mm	125 Cel	-40 Cel		QUAD	S-XQCC-N16			15 V	.95 mm	.25 A	4 mm		NO	78 dB	5 V	ALSO OPERATES WITH 4.5V TO 24V SINGLE SUPPLY		-5 V		BREAK-BEFORE-MAKE			440 ns	3.3 ohm	280 ns	.04 ohm	4 mm	15.3 V
DG406BDN-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.5062 mm	Not Qualified		86 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	123 ns	60 ohm	94 ns	3 ohm	11.5062 mm
DG9408EDN-T1-GE4	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8	BICMOS		NO LEAD	-8 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N16		1	8 V	.95 mm		4 mm			83 dB	3 V	ALSO OPERATE WITH 3V, 5V AND 12V SINGLE SUPPLY		-3 V	e4				76 ns	8 ohm	43 ns	3.6 ohm	4 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.