SQUARE Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Adjustable Threshold	Maximum Input Voltage
TS3USB3031RMGR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL		VQCCN	SQUARE	YES	PLASTIC/EPOXY	.04 mA		2		6500 kHz	NO LEAD					CHIP CARRIER, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N12	SEPARATE OUTPUT	1	4.3 V	.75 mm		1.8 mm		NC		2.5 V		0 V		e4	BREAK-BEFORE-MAKE	30	260		6 ohm			1.8 mm		3.6 V
DG406DN-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn)	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.02 A	11.5062 mm	Not Qualified		69 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	5 ohm	11.5062 mm
MAX14777GTP+	Analog Devices	SPST	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	BICMOS		NO LEAD			5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N20		1	5.5 V	.8 mm		4 mm			66 dB	3 V				e3		30	260	40000 ns	10 ohm	10000 ns		4 mm
PCA9548ABSHP	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER		24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.1 mA	1	8			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		.5 mm	85 Cel	-40 Cel		QUAD	S-PQCC-N24	SEPARATE OUTPUT	1	5.5 V	1 mm		4 mm				2.3 V							260	.3 ns	55 ohm	.3 ns		4 mm
ADG1413YCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD	-16.5 V	-5 V	5 V	+-5/12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	16.5 V	1 mm		4 mm	Not Qualified	NO/NC	80 dB	4.5 V	CAN ALSO OPERATES AT 12 V AND +/-15 V SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	510 ns	5.4 ohm	380 ns	.13 ohm	4 mm
ADG5436BRUZ	Analog Devices	SPDT	AUTOMOTIVE	16	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-22 V	-15 V	15 V	+-9/+-22/9/40	SMALL OUTLINE	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G16	SEPARATE OUTPUT	1	22 V	1.2 mm		4.4 mm	Not Qualified		78 dB	9 V			-9 V	e3	BREAK-BEFORE-MAKE	30	260	351 ns	11 ohm	218 ns	.35 ohm	5 mm
ADG406BPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
ADG621BRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
ADG1436YCPZ-REEL	Analog Devices	SPDT	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/+12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	5.5 V	1 mm		4 mm	Not Qualified		80 dB	4.5 V	CAN ALSO OPERATES AT 12 V AND +/-15 V SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE		260	460 ns	4 ohm	400 ns	.13 ohm	4 mm
ADG732BSUZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY	.02 mA	1	32	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G48		3	2.75 V	1.2 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V			-2.25 V	e3	BREAK-BEFORE-MAKE		260	37 ns	5.5 ohm	26 ns	.3 ohm	7 mm
ADG507AKPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.51 mm	.02 A	11.506 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
ADG884BRMZ	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	60 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	56 ns	.5 ohm	19 ns	.02 ohm	3 mm
ADG1604BCPZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.36 mA	1	4	CMOS		NO LEAD	-8 V	-5 V	5 V	3.3/12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	8 V	1 mm	.627 A	4 mm	Not Qualified		70 dB	3.3 V			-3.3 V	e3	BREAK-BEFORE-MAKE	30	260	177 ns	1.2 ohm	310 ns	.04 ohm	4 mm
NCP45524IMNTWG-H	Onsemi	SPST	INDUSTRIAL	8	HVSON	SQUARE	YES	PLASTIC/EPOXY	.68 mA	1	1			NO LEAD			3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20		.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N8		3	5.5 V	1 mm		2 mm				3 V				e3		30	260		.0317 ohm			2 mm	NO
ADG736BRMZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm	.03 A	3 mm	Not Qualified		62 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	12 ohm	10 ns	.1 ohm	3 mm
ADG619BRMZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	6.5 ohm	75 ns	.7 ohm	3 mm
ISL84781IRZ	Renesas Electronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		NO LEAD			1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16		2	3.6 V	.8 mm		3 mm				1.6 V				e3		30	260	35 ns	.85 ohm	27 ns	.1 ohm	3 mm
SN74LVC1G3157DSFR	Texas Instruments	SPDT	INDUSTRIAL	6	VSON	SQUARE	YES	PLASTIC/EPOXY	.035 mA	1	1	CMOS	340 kHz	NO LEAD			2.3 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	Multiplexers or Switches	.35 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	S-PDSO-N6	COMMON OUTPUT	1	5.5 V	.4 mm		1 mm	Not Qualified	NC	57 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	24 ns	30 ohm	13 ns	.1 ohm	1 mm
TS3USB221EDRCR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY	.03 mA	1	2		1000 kHz	NO LEAD			3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N10	SEPARATE OUTPUT	2	3.6 V	1 mm		3 mm	Not Qualified	NO	40 dB	2.3 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	30 ns	6 ohm	12 ns	.2 ohm	3 mm		5.5 V
TPS2066CDGN-2	Texas Instruments	SPST	INDUSTRIAL		HTSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA					GULL WING					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	S-PDSO-G8	SEPARATE OUTPUT	2		1.1 mm		3 mm						0 V		e4	MAKE-BEFORE-BREAK	30	260					3 mm		5.5 V
ADG5436FBCPZ-RL7	Analog Devices	SPDT	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.0012 mA	2	1			NO LEAD	-16.5 V	-15 V	15 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	16.5 V	.8 mm		4 mm				13.5 V	CAN ALSO OPERATE WITH +/-20 V INPUT	-15 V	-13.5 V	e3	BREAK-BEFORE-MAKE	30	260		11.2 ohm		.15 ohm	4 mm		15 V
MAX4634EUB-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified		80 dB	1.8 V				e0	BREAK-BEFORE-MAKE	20	240	24 ns	7 ohm	16 ns	.1 ohm	3 mm
MAX4634EUB+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified		80 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	22 ns	7 ohm	14 ns	.1 ohm	3 mm
ADG1412YCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD	-16.5 V	-5 V	5 V	+-5/12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	16.5 V	1 mm		4 mm	Not Qualified	NO	80 dB	4.5 V	CAN ALSO OPERATES AT 12 V AND +/-15 V SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	510 ns	5.4 ohm	380 ns	.13 ohm	4 mm
ADG732BSUZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY	.02 mA	1	32	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G48		3	2.75 V	1.2 mm	.03 A	7 mm	Not Qualified	NO	72 dB	2.25 V	ALSO OPERTES WITH 1.8V TO 5.5V SINGLE SUPPLY		-2.25 V	e3	BREAK-BEFORE-MAKE		260	37 ns	5.5 ohm	35 ns	.3 ohm	7 mm
NLAS4684MR2G	Onsemi	SPDT	MILITARY	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-55 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	65 dB	1.8 V				e3	BREAK-BEFORE-MAKE	40	260	60 ns	1 ohm	50 ns	.06 ohm	3 mm
TS3A27518ERTWR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.005 mA	1	6		240 kHz	NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	SEPARATE OUTPUT	2	3.6 V	.8 mm	.05 A	4 mm	Not Qualified	NO	60 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	56.7 ns	16.3 ohm	31.2 ns	.3 ohm	4 mm		3.6 V
ADG5208FBCPZ-RL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8			NO LEAD	-16.5 V	-15 V	15 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	16.5 V	.8 mm		4 mm			76 dB	13.5 V			-13.5 V	e3		30	260	260 ns	270 ohm	145 ns	2.5 ohm	4 mm
HMC8038LP4CETR	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	105 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	5.4 V	1 mm		4 mm				3 V				e3		30	260					4 mm
MAX14662ETI+	Analog Devices	SPST	INDUSTRIAL	28	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1	CMOS		NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N28		1	5.5 V	.8 mm		4 mm			40 dB	1.6 V				e3		30	260	60000 ns	1 ohm		.02 ohm	4 mm
ADG884BRMZ-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	60 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	56 ns	.5 ohm	19 ns	.02 ohm	3 mm
TS5A23159DGSTE4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.0005 mA	2	2		105 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm	.1 A	3 mm	Not Qualified	NO/NC	64 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	55 ns	3.5 ohm	12 ns	.15 ohm	3 mm		5.5 V
ADG736BRMZ	Analog Devices	SPDT	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm	.03 A	3 mm	Not Qualified		62 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	20 ns	12 ohm	10 ns	.1 ohm	3 mm
FSUSB74MPX	Onsemi	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N16		1	4.4 V	.8 mm		3 mm			40 dB	2.5 V				e4		30	260	400000 ns	9 ohm	80 ns	.5 ohm	3 mm
ADG1434YCPZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5,+12,+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20	SEPARATE OUTPUT	3	5.5 V	1 mm		4 mm	Not Qualified	NO/NC	70 dB	4.5 V	CAN ALSO OPERATES AT +/-12 V AND +/-15 V SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	545 ns	9 ohm	240 ns	.55 ohm	4 mm
MAX4564EUA	Maxim Integrated	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-6 V	-5 V	5 V	+-5,3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	6 V	1.1 mm		3 mm	Not Qualified	NC	77 dB	2 V			-2 V	e0	BREAK-BEFORE-MAKE	20	240	60 ns	60 ohm	40 ns	.75 ohm	3 mm
MAX4564EUA+	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-6 V	-5 V	5 V	+-5,3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	6 V	1.1 mm		3 mm	Not Qualified	NC	77 dB	2 V			-2 V	e3	BREAK-BEFORE-MAKE	30	260	60 ns	60 ohm	40 ns	.75 ohm	3 mm
TPS2052CDGN	Texas Instruments	SPST	INDUSTRIAL	8	HTSSOP	SQUARE	YES	PLASTIC/EPOXY	.12 mA	1	1			GULL WING			5 V		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	COMMON OUTPUT	2	5.5 V	1.1 mm		3 mm				4.5 V				e4	MAKE-BEFORE-BREAK	NOT SPECIFIED	260	2400000 ns	.095 ohm	3250000 ns		3 mm
ADG1611BCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	QCCN	SQUARE	YES	UNSPECIFIED		4		CMOS		NO LEAD				3.3/12/+-5	CHIP CARRIER	LCC16,.16SQ,25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3					Not Qualified	NO						e3	BREAK-BEFORE-MAKE	30	260	493 ns	4 ohm
ADG736BRMZ-REEL	Analog Devices	SPDT	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm	.03 A	3 mm	Not Qualified		62 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	12 ohm	10 ns	.1 ohm	3 mm
ADG419BR-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	16.5 V	1.09 mm		3 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		3 mm
ADG721BRMZ-REEL7	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	60 dB	1.8 V	ALSO OPEARTES AT 5 V SUPPLY			e3	BREAK-BEFORE-MAKE	30	260	24 ns	10 ohm	11 ns	.3 ohm	3 mm
MAX4999ETJ+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED	.005 mA	1	8	CMOS		NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32		1	3.6 V	.8 mm	.06 A	5 mm	Not Qualified		27 dB	3 V				e3		30	260		12 ohm		.8 ohm	5 mm
PCA9546ABS,118	NXP Semiconductors	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	100 mA	1	4			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1	3.6 V	1 mm		4 mm				2.3 V	ALSO OPERATES WITH 4.5 TO 5.5V SUPPLY			e4		30	260	.3 ns	55 ohm	.3 ns		4 mm
TS3USB30EDGSR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	2		900 kHz	GULL WING			3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	4.3 V	1.1 mm		3 mm	Not Qualified	NC	40 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	30 ns	10 ohm	25 ns	.35 ohm	3 mm		4.3 V
ADG1408YCPZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	8	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-15/+12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	5.5 V	1 mm	.03 A	4 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE		260	330 ns	9 ohm	285 ns	.78 ohm	4 mm
TS5A23157DGSRG4	Texas Instruments	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.01 mA	2	2		220 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	60 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	24 ns	140 ohm	13 ns	1 ohm	3 mm		5.5 V
FSA4476UCX	Onsemi	DPDT	INDUSTRIAL	25	UFBGA	SQUARE	YES	PLASTIC/EPOXY		1	2			BALL					GRID ARRAY, ULTRA THIN PROFILE, FINE PITCH	BGA24,5X5,20		.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B25		1	5.5 V	.625 mm		2 mm			100 dB	2.7 V				e1	BREAK-BEFORE-MAKE	30	260					2 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.