SQUARE Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG726BCPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	HVQCCN	SQUARE	YES	UNSPECIFIED	.02 mA	1	16	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N48		3	2.75 V	1 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERTES WITH 1.8V TO 5.5V SINGLE SUPPLY		-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	37 ns	5.5 ohm	26 ns	.3 ohm	7 mm
ADG731BCPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	HVQCCN	SQUARE	YES	UNSPECIFIED		1	32	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N48		3	2.75 V	1 mm		7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e3			260	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm
FPF1204UCX	Onsemi	SPST	INDUSTRIAL	4	VFBGA	SQUARE	YES	PLASTIC/EPOXY		1	1			BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B4		1	5.5 V	.539 mm		.76 mm	Not Qualified			1.2 V				e1		30	260		.105 ohm			.76 mm
TMUX7219DGKR	Texas Instruments	SPDT	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.04 mA	1	1	CMOS	40 kHz	GULL WING	-22 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	22 V	1.1 mm	.43 A	3 mm			75 dB	4.5 V		-4.5 V	-4.5 V	e4	BREAK-BEFORE-MAKE	30	260	200 ns	4.5 ohm	210 ns	.05 ohm	3 mm	22 V
ADG419BR	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	16.5 V	1.09 mm		3 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES WITH 12V NOMINAL SINGLE SUPPLY		-13.5 V	e0	BREAK-BEFORE-MAKE		240	160 ns	35 ohm	160 ns		3 mm
MAX4781ETE-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	8	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16		1	3.6 V	.8 mm	.01 A	3 mm	Not Qualified		75 dB	1.6 V				e0	BREAK-BEFORE-MAKE			25 ns	1 ohm	15 ns	.3 ohm	3 mm
MAX4781ETE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	8	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16		1	3.6 V	.8 mm	.01 A	3 mm	Not Qualified			1.6 V				e3	BREAK-BEFORE-MAKE	30	260	30 ns	2.5 ohm	20 ns	.3 ohm	3 mm
ADG704BRM-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.03 A	3 mm	Not Qualified		60 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE		240	24 ns	8 ohm	16 ns	.1 ohm	3 mm
ADG888YCPZ-REEL7	Analog Devices	DPDT	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			2.7 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	5.5 V	1 mm		4 mm	Not Qualified		67 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	50 ns	.7 ohm	22 ns	.045 ohm	4 mm
ADGS1412BCPZ-RL7	Analog Devices	SPDT	AUTOMOTIVE	24	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD	-16.5 V	-5 V	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N24		3	16.5 V	1 mm		4 mm				4.5 V			-4.5 V	e3		30	260		4 ohm		.13 ohm	4 mm
MAX14759ETA+T	Analog Devices	SPST	INDUSTRIAL	8	HVSON	SQUARE	YES	PLASTIC/EPOXY		1	1	BICMOS		NO LEAD			5 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N8		1	5.5 V	.8 mm		3 mm			77 dB	3 V				e3		30	260	300000 ns	1 ohm	1000000 ns	.0024 ohm	3 mm
MAX4659EUA	Maxim Integrated	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-20 V	-15 V	15 V	9/40/+-4.5/+-20	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	20 V	1.1 mm		3 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE		245	150 ns	25 ohm	150 ns	.4 ohm	3 mm
MAX4659EUA+	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-20 V	-15 V	15 V	9/40/+-4.5/+-20	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	20 V	1.1 mm		3 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	25 ohm	150 ns	.4 ohm	3 mm
74LVC2G66DP,125	NXP Semiconductors	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified		46 dB	1.65 V				e4		30	260	13 ns	38 ohm	11.5 ns		3 mm
HV2201FG-G-M931	Microchip Technology	SPST	COMMERCIAL	48	LFQFP	SQUARE	YES	PLASTIC/EPOXY	3 mA	8	8	CMOS		GULL WING			5 V		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.28SQ,20		.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQFP-G48	SEPARATE OUTPUT		5.5 V	1.6 mm	3 A	7 mm		NO	33 dB	3 V	IT ALSO REQUIRES VPP (40V TO VNN +200V) AND VNN (-40V TO -160V) SUPPLY	-30 V		e3				5000 ns	38 ohm	5000 ns	1.9 ohm	7 mm	30 V
SY58023UMG	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	130 mA	1	2			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N16	SEPARATE OUTPUT	2	3.6 V	.9 mm		3 mm	Not Qualified			2.375 V	3.3V NOMINAL ALSO AVAILABLE			e4		40	260					3 mm
DG406DN-T1-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.5062 mm	Not Qualified		69 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	5 ohm	11.5062 mm
ISL84467IRTZ-T	Renesas Electronics	SPDT	INDUSTRIAL	16	VQCCN	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		NO LEAD			1.8 V	1.8/4.3	CHIP CARRIER, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16	SEPARATE OUTPUT	2	4.5 V	.8 mm		3 mm	Not Qualified		65 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260		.9 ohm			3 mm
NLAS4717MR2G	Onsemi	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	75 dB	1.8 V				e3	BREAK-BEFORE-MAKE	40	260	30 ns	4.5 ohm	40 ns	.1 ohm	3 mm
PI3DBS16212XUAEX	Diodes Incorporated	DIFFERENTIAL MULTIPLEXER		18	VQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			3.3 V		CHIP CARRIER, VERY THIN PROFILE	LCC18(UNSPEC)			85 Cel	-40 Cel		QUAD	S-XQCC-N18	SEPARATE OUTPUT							NO/NC
ADG1412YCPZ-REEL	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD	-16.5 V	-5 V	5 V	+-5/12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	16.5 V	1 mm		4 mm	Not Qualified	NO	80 dB	4.5 V	CAN ALSO OPERATES AT 12 V AND +/-15 V SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	40	260	510 ns	5.4 ohm	380 ns	.13 ohm	4 mm
ADG506AKP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.51 mm	.02 A	11.506 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE	30	225	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
ADG622BRMZ-REEL	Analog Devices	SPST	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NC	65 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE		260	120 ns	5.5 ohm	70 ns	.25 ohm	3 mm
AD8108ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	8	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm		12 mm	Not Qualified		93 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns				12 mm
FSA201MUX	Onsemi	DPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	2			GULL WING			3.3 V	3.3,5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	3.6 V	1.1 mm		3 mm	Not Qualified		37 dB	2.7 V						30	260	10000 ns	1 ohm	10000 ns	.01 ohm	3 mm
TS3A27518ETRTWRQ1	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.0012 mA	3	6		240 kHz	NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	SEPARATE OUTPUT	3	3.6 V	.8 mm	.05 A	4 mm	Not Qualified	NO	60 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	56.7 ns	16.3 ohm	35.2 ns	1 ohm	4 mm	3.6 V
ADG1204YCPZ-500RL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	12	HVQCCN	SQUARE	YES	UNSPECIFIED	.23 mA	1	4	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N12		3	16.5 V	1 mm	.045 A	3 mm	Not Qualified		85 dB	13.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	85 ns	190 ohm	110 ns	3.5 ohm	3 mm
ADG1208YCPZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.33 mA	1	8	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	16.5 V	1 mm	.03 A	4 mm	Not Qualified		85 dB	13.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	115 ns	200 ohm	140 ns	3.5 ohm	4 mm
ADG5208BCPZ-RL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	QCCN	SQUARE	YES	PLASTIC/EPOXY	.13 mA	1	8	BICMOS		NO LEAD				+-9/+-22/9/40	CHIP CARRIER	LCC16,.16SQ,25	Multiplexer or Switches	.635 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16		3			.021 A		Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	275 ns	700 ohm
ADG5434BCPZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	20	QCCN	SQUARE	YES	PLASTIC/EPOXY		4		BICMOS		NO LEAD				+-9/+-22/9/40	CHIP CARRIER	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N20	SEPARATE OUTPUT	3					Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	289 ns	42 ohm
ADG726BCPZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	48	HVQCCN	SQUARE	YES	UNSPECIFIED	.02 mA	1	16	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N48		3	2.75 V	1 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERTES WITH 1.8V TO 5.5V SINGLE SUPPLY		-2.25 V	e3	BREAK-BEFORE-MAKE		260	37 ns	5.5 ohm	26 ns	.3 ohm	7 mm
NB7V72MMNHTBG	Onsemi	VIDEO MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2	CMOS		NO LEAD			1.8 V	1.8/2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	2.625 V	1 mm		3 mm	Not Qualified			1.71 V						30	260					3 mm
TMUX1104DGSR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS	150 kHz	GULL WING			5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm		3 mm			65 dB	1.08 V				e4		NOT SPECIFIED	NOT SPECIFIED	18 ns	4.9 ohm	9 ns	.85 ohm	3 mm
ADGS1208BCPZ-RL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	24	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8	CMOS		NO LEAD	-16.5 V	-15 V	15 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel	-40 Cel		QUAD	S-XQCC-N24		3	16.5 V	.8 mm		4 mm			85 dB	4.5 V	ALSO HAS LOGIC POWER SUPPLY= 2.7V TO 5.5V		-4.5 V			30	260	155 ns	200 ohm	190 ns	3.5 ohm	4 mm
MAX4641EUA-T	Maxim Integrated	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified		80 dB	1.8 V				e0				20 ns	8 ohm	10 ns	.2 ohm	3 mm
MAX4641EUA+T	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified		80 dB	1.8 V				e3		30	260	20 ns	8 ohm	10 ns	.2 ohm	3 mm
TS3A27518EZQSR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	24	VFBGA	SQUARE	YES	PLASTIC/EPOXY	.005 mA	1	1		240 kHz	BALL			1.8 V	1.8/3.3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA24,5X5,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B24	SEPARATE OUTPUT	1	3.6 V	1 mm	.05 A	3 mm	Not Qualified	NO	60 dB	1.65 V		0 V		e1	BREAK-BEFORE-MAKE	30	260	56.7 ns	14.4 ohm	31.2 ns	.3 ohm	3 mm	3.6 V
ADG704BRM-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G10		1	5.5 V	1.1 mm	.03 A	3 mm	Not Qualified		60 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE		240	24 ns	8 ohm	16 ns	.1 ohm	3 mm
SY58024UMG	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED	250 mA	2	2			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.20SQ,20		.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N32	SEPARATE OUTPUT	2	2.625 V	.9 mm		5 mm	Not Qualified			2.375 V				e4		40	260					5 mm
ADG1401BRMZ	Analog Devices	SPST	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-5 V	5 V	+-5/+12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	16.5 V	1.1 mm		3 mm	Not Qualified	NO	58 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	375 ns	2.7 ohm			3 mm
ADG1404YCPZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.28 mA	1	4	CMOS		NO LEAD	-16.5 V	-5 V	5 V	+-15/+12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	16.5 V	1 mm	.03 A	4 mm	Not Qualified		80 dB	4.5 V	CAN ALSO OPERATES AT 12 V AND +/-15 V SUPPLY		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	480 ns	4 ohm	400 ns	.13 ohm	4 mm
ADG1612BCPZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD	-8 V	-5 V	5 V	3.3/12/+-5	CHIP CARRIER	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	8 V	1 mm		4 mm	Not Qualified	NC	70 dB	3.3 V			-3.3 V	e3	BREAK-BEFORE-MAKE		260	285 ns	1.2 ohm	159 ns	.04 ohm	4 mm
ADG2188BCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8	CMOS		NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	13.2 V	1 mm		5 mm	Not Qualified		69 dB	10.8 V	CAN ALSO OPERATES AT +/-12 V SUPPLY			e3	MAKE-BEFORE-BREAK		260	185 ns	50 ohm	250 ns	4.5 ohm	5 mm
ADG5433BCPZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		3	1	CMOS		NO LEAD	-22 V	-15 V	15 V	+-9/+-22/9/40	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT		22 V	.8 mm		4 mm	Not Qualified		60 dB	9 V			-9 V	e3	BREAK-BEFORE-MAKE			274 ns	15 ohm	140 ns	.3 ohm	4 mm
FSA644UCX	Onsemi	SPDT	INDUSTRIAL	36	VFBGA	SQUARE	YES	PLASTIC/EPOXY		1	4			BALL			3.3 V	1.8/4	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA36,6X6,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	S-PBGA-B36	SEPARATE OUTPUT	1	4.5 V	.539 mm		2.36 mm	Not Qualified		18 dB	1.65 V				e1	BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	500 ns	12 ohm	90 ns	.8 ohm	2.36 mm
MAX4638ETE	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	8	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	+-2.5/3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16		1	2.75 V	.8 mm	.03 A	4 mm	Not Qualified			2.25 V			-2.25 V	e0	BREAK-BEFORE-MAKE			20 ns	3.5 ohm	20 ns	.2 ohm	4 mm
MAX4638ETE+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	8	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	+-2.5/3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16		1	2.75 V	.8 mm	.03 A	4 mm	Not Qualified			2.25 V			-2.25 V	e3	BREAK-BEFORE-MAKE	30	260	20 ns	3.5 ohm	20 ns	.2 ohm	4 mm
ADG731BCP-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	HVQCCN	SQUARE	YES	UNSPECIFIED		1	32	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N48		3	2.75 V	1 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE		240	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.