COMMERCIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
DG384C/D	Analog Devices	DPST	COMMERCIAL	14	DIE	RECTANGULAR	YES	UNSPECIFIED		2	2	CMOS	NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	TIN LEAD	UPPER	R-XUUC-N14	SEPARATE OUTPUT		18 V				Not Qualified	NO	62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
DG390CK	Analog Devices	SPDT	COMMERCIAL	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		2	1	CMOS	THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-GDIP-T16	SEPARATE OUTPUT		18 V	5.08 mm		7.62 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
IH5043CPE+	Analog Devices	SPDT	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	THROUGH-HOLE	-18 V	-15 V	15 V	5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	18 V	4.572 mm		7.62 mm	Not Qualified		50 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	80 ohm	200 ns	5 ohm	19.175 mm
AVPRO5002R-CMR	Analog Devices		COMMERCIAL	48	QCCN	SQUARE	YES	PLASTIC/EPOXY					NO LEAD				5,12	CHIP CARRIER	LCC48,.24SQ,16	Multiplexer or Switches	.4 mm	70 Cel		QUAD	S-PQCC-N48							Not Qualified
HIW-0509A-5	Analog Devices		COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS	GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	DUAL	R-PDSO-G16							Not Qualified						e0	BREAK-BEFORE-MAKE				2000 ohm
AVPRO5002R-CM	Analog Devices		COMMERCIAL	48	QCCN	SQUARE	YES	PLASTIC/EPOXY					NO LEAD				5,12	CHIP CARRIER	LCC48,.24SQ,16	Multiplexer or Switches	.4 mm	70 Cel		QUAD	S-PQCC-N48							Not Qualified
IH5142CPE+	Analog Devices	SPDT	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	CMOS	THROUGH-HOLE		-15 V	15 V	5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16		1	18 V	4.572 mm		7.62 mm	Not Qualified		50 dB	4.5 V			e3	BREAK-BEFORE-MAKE	30	260	200 ns	75 ohm	125 ns	5 ohm	19.175 mm
DG387CWE	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	18 V	2.65 mm		7.5 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns		10.3 mm
MX509ACWE	Analog Devices		COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS	GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	DUAL	R-PDSO-G16							Not Qualified						e0	BREAK-BEFORE-MAKE				450 ohm
DG201AJ	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT							NC					e0	BREAK-BEFORE-MAKE			600 ns	250 ohm
DG200ACA-T	Analog Devices	SPST	COMMERCIAL	10	TO-100	ROUND	NO	METAL		2	1	CMOS	WIRE		-15 V	15 V		CYLINDRICAL				70 Cel	TIN LEAD	BOTTOM	O-MBCY-W10							Not Qualified		75 dB				e0				1000 ns	80 ohm	500 ns
IH5045CWE+	Analog Devices	DPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	2	CMOS	GULL WING	-18 V	-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	18 V	2.65 mm		7.5 mm	Not Qualified		50 dB	4.5 V		-4.5 V	e3		30	260	400 ns	80 ohm	200 ns	5 ohm	10.3 mm
IH5040CPE+	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	CMOS	THROUGH-HOLE	-18 V	-15 V	15 V		IN-LINE			2.54 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16		1	18 V	4.572 mm		7.62 mm	Not Qualified		50 dB	4.5 V		-4.5 V	e3		30	260	400 ns	80 ohm	200 ns	5 ohm	19.175 mm
IH5048AC/D	Analog Devices	SPST	COMMERCIAL	14	DIE	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS	NO LEAD		-15 V	15 V		UNCASED CHIP				70 Cel	TIN LEAD	UPPER	R-XUUC-N14							Not Qualified		50 dB				e0				600 ns	30 ohm	300 ns	8 ohm
IH5041CPE+	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	THROUGH-HOLE	-18 V	-15 V	15 V	5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	18 V	4.572 mm		7.62 mm	Not Qualified	NO	50 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	80 ohm	200 ns	5 ohm	19.175 mm
IH5049CPE+	Analog Devices	DPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	2	CMOS	THROUGH-HOLE		-15 V	15 V	5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1		4.572 mm		7.62 mm	Not Qualified	NO	50 dB				e3	BREAK-BEFORE-MAKE	30	260	600 ns	45 ohm	300 ns	8 ohm	19.175 mm
DG201ACUE	Analog Devices	SPST	COMMERCIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	70 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	18 V	1.1 mm		4.4 mm	Not Qualified	NC	70 dB	4.5 V		-4.5 V	e0	BREAK-BEFORE-MAKE			600 ns	200 ohm	450 ns		5 mm
IH5141CTW-T	Analog Devices	SPST	COMMERCIAL	10		ROUND	NO	METAL		2	1	CMOS	WIRE		-15 V	15 V		CYLINDRICAL				70 Cel	TIN LEAD	BOTTOM	O-MBCY-W10			18 V				Not Qualified		50 dB	4.5 V			e0				150 ns	75 ohm	125 ns	5 ohm
DG201ACJ+	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	18 V	4.572 mm		7.62 mm	Not Qualified	NC	70 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	600 ns	200 ohm	450 ns		19.175 mm
DG200ACJ+	Analog Devices	SPST	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T14		1		5.72 mm		7.62 mm	Not Qualified		75 dB				e3		30	260	1000 ns	80 ohm	500 ns
DG202CJ+	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	18 V	4.572 mm		7.62 mm	Not Qualified	NO	70 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	600 ns	200 ohm	450 ns		19.175 mm
DG390CJ	Analog Devices	SPDT	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	18 V	4.572 mm		7.62 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns		19.175 mm
DG201AC	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	CERAMIC		4		CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-XDIP-T16	SEPARATE OUTPUT							NC					e0	BREAK-BEFORE-MAKE			600 ns	250 ohm
DG201C/D	Analog Devices	SPST	COMMERCIAL	15	DIE	UNSPECIFIED	YES	UNSPECIFIED		4	1	CMOS	NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	TIN LEAD	UPPER	X-XUUC-N	SEPARATE OUTPUT		18 V				Not Qualified	NC	70 dB	4.5 V		-4.5 V	e0	BREAK-BEFORE-MAKE			600 ns	200 ohm	450 ns
DG387C/D	Analog Devices	SPDT	COMMERCIAL	12	DIE	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS	NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	TIN LEAD	UPPER	R-XUUC-N12			18 V				Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
IH5042CWE+T	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-18 V	-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	18 V	2.65 mm		7.5 mm	Not Qualified		50 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	80 ohm	200 ns	5 ohm	10.3 mm
IH5143CPE+	Analog Devices	SPDT	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	THROUGH-HOLE		-15 V	15 V	5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	18 V	4.572 mm		7.62 mm	Not Qualified		50 dB	4.5 V			e3	BREAK-BEFORE-MAKE	30	260	200 ns	75 ohm	125 ns	5 ohm	19.175 mm
DG381C/D	Analog Devices	SPST	COMMERCIAL	12	DIE	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS	NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	TIN LEAD	UPPER	R-XUUC-N12	SEPARATE OUTPUT		18 V				Not Qualified	NC	62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
DG381CK	Analog Devices	SPST	COMMERCIAL	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		2	1	CMOS	THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-GDIP-T14	SEPARATE OUTPUT		18 V	5.08 mm		7.62 mm	Not Qualified	NC	62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns		19.43 mm
DG387CK	Analog Devices	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	1	CMOS	THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-GDIP-T14			18 V	5.08 mm		7.62 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns		19.43 mm
IH5352CPE-2	Analog Devices		COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS	THROUGH-HOLE				5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1						NO					e0	BREAK-BEFORE-MAKE			300 ns	350 ohm
MAX395C/D+	Analog Devices	SPST	COMMERCIAL	24	DIE	RECTANGULAR	YES	UNSPECIFIED	.03 mA	8	1	CMOS	NO LEAD		-5 V	5 V		UNCASED CHIP				70 Cel	TIN LEAD	UPPER	R-XUUC-N24							Not Qualified		90 dB				e0				400 ns	100 ohm	400 ns	5 ohm
MAX381CSE+T	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING	-18 V	-5 V	5 V		SMALL OUTLINE			1.27 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	18 V	1.75 mm		3.9 mm			72 dB	3 V		-3 V	e3		30	260	225 ns	35 ohm	150 ns	.5 ohm	9.9 mm
MAX9671CTH+	Analog Devices	AUDIO/VIDEO SWITCH	COMMERCIAL	44	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2	BICMOS	NO LEAD			3.3 V	3.3,12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC44,.28SQ,20	Multiplexer or Switches	.5 mm	70 Cel	MATTE TIN	QUAD	S-XQCC-N44		1	3.6 V	.8 mm		7 mm	Not Qualified			3 V			e3		30	260					7 mm
AD7507JN/+	Analog Devices		COMMERCIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	70 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28					.02 A								e0	BREAK-BEFORE-MAKE				550 ohm
LTC4305CGN#TRPBF	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1		GULL WING			3.3 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.75 mm		3.9 mm	Not Qualified			2.7 V			e3		30	260					4.8895 mm
AD7501JP	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	1	8	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.02 A	8.9662 mm	Not Qualified						e0					300 ohm		6.8 ohm	8.9662 mm
AD7592DIKPZ	Analog Devices	SPDT	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	2	1	CMOS	J BEND		-15 V	15 V		CHIP CARRIER			1.27 mm	70 Cel	MATTE TIN	QUAD	S-PQCC-J20		1		4.57 mm		8.965 mm	Not Qualified		85 dB		OVERVOLTAGE PROTECTION		e3			260	350 ns	90 ohm	350 ns	2 ohm	8.965 mm
AD8191	Analog Devices	AUDIO/VIDEO SWITCH	COMMERCIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	4		GULL WING			3.3 V		FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	70 Cel		QUAD	S-PQFP-G100			3.6 V	1.6 mm		14 mm	Not Qualified			3 V											14 mm
LTC201ACS#TRPBF	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.752 mm		3.899 mm	Not Qualified		75 dB				e3				400 ns	125 ohm	300 ns	3.25 ohm	9.906 mm
AD7510DIKN	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT			4.32 mm		7.62 mm	Not Qualified	NO			OVERVOLTAGE PROTECTION		e0	MAKE-BEFORE-BREAK			180 ns	175 ohm	350 ns	.75 ohm	19.055 mm
AD7501KN	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.8 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16				5.33 mm	.035 A	7.62 mm	Not Qualified						e0				80 ns	300 ohm	80 ns	6.8 ohm	20.13 mm
LTC221CS#TRPBF	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.752 mm		3.899 mm	Not Qualified		75 dB		CAN ALSO OPERATE FROM SINGLE 5V SUPPLY		e3				400 ns	90 ohm	300 ns		9.906 mm
AD7501KNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.8 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	MATTE TIN	DUAL	R-PDIP-T16				5.33 mm	.035 A	7.62 mm	Not Qualified						e3				80 ns	300 ohm	80 ns	6.8 ohm	20.13 mm
AD7512DIKP	Analog Devices	SPDT	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.966 mm	Not Qualified	NO/NC			OVERVOLTAGE PROTECTION		e0			225		175 ohm		.75 ohm	8.966 mm
LTC1391CN#PBF	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS	THROUGH-HOLE		-5 V	5 V		IN-LINE			2.54 mm	70 Cel	MATTE TIN	DUAL	R-PDIP-T16		1		3.937 mm		7.62 mm	Not Qualified		70 dB		CAN ALSO OPERATE WITH 2.7 V SUPPLY		e3		30	260	400 ns	75 ohm	200 ns	15 ohm
AD7510DIJP	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	4	1	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT			4.57 mm		8.9662 mm	Not Qualified	NO			OVERVOLTAGE PROTECTION		e0	MAKE-BEFORE-BREAK				100 ohm		1 ohm	8.9662 mm
AD7512DIJP-REEL	Analog Devices	SPDT	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	2	1	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.9662 mm	Not Qualified				OVERVOLTAGE PROTECTION		e0			225		100 ohm		1 ohm	8.9662 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.