COMMERCIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
LTC1380CGN#TRPBF	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING		-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB				e3		30	260	1500 ns	120 ohm	1200 ns	24 ohm	4.9 mm
LTC221CS#PBF	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.752 mm		3.899 mm	Not Qualified		75 dB		CAN ALSO OPERATE FROM SINGLE 5V SUPPLY		e3		30	260	400 ns	90 ohm	300 ns		9.906 mm
LTC1380CS	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING		-5 V	5 V		SMALL OUTLINE			1.27 mm	70 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB				e0				1500 ns	70 ohm	1200 ns	14 ohm	9.9 mm
LTC4305CDHD#PBF	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	HVSSON	SQUARE	YES	PLASTIC/EPOXY		1	1		NO LEAD			3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH			.5 mm	70 Cel	MATTE TIN	DUAL	S-PDSO-N16		1	5.5 V	.8 mm		5 mm	Not Qualified			2.7 V			e3		30	260					5 mm
AD7511DIKNZ	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT			4.32 mm		7.62 mm	Not Qualified	NC			OVERVOLTAGE PROTECTION		e3	BREAK-BEFORE-MAKE				100 ohm		.75 ohm	19.055 mm
LTC201ACN	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16		1		3.937 mm		7.62 mm	Not Qualified		75 dB				e0		20	235	400 ns	125 ohm	300 ns	3.25 ohm
LTC1393CGN#TRPBF	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS	GULL WING			5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB				e3			260	1500 ns	140 ohm	1200 ns	28 ohm	4.9 mm
LTC1380CGN#PBF	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING		-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB				e3		30	260	1500 ns	120 ohm	1200 ns	24 ohm	4.9 mm
LTC203CS#TRPBF	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.752 mm		3.899 mm	Not Qualified		75 dB				e3				400 ns	125 ohm	300 ns	3.25 ohm	9.906 mm
LTC4306CUFD#TR	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	24	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	1		NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	70 Cel	TIN LEAD	QUAD	R-PQCC-N24		1	5.5 V	.8 mm		4 mm	Not Qualified			2.7 V			e0								5 mm
5962-01-374-3055	Analog Devices		COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.8 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel		DUAL	R-PDIP-T16					.02 A		Not Qualified											300 ohm
AD7510DIJN/+	Analog Devices		COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16	SEPARATE OUTPUT							NO					e0	MAKE-BEFORE-BREAK				175 ohm
LTC221CN#PBF	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	70 Cel	MATTE TIN	DUAL	R-PDIP-T16		1		3.937 mm		7.62 mm	Not Qualified		75 dB		CAN ALSO OPERATE FROM SINGLE 5V SUPPLY		e3		30	260	400 ns	90 ohm	300 ns
AD7502KP	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	1	4	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.02 A	8.9662 mm	Not Qualified						e0					300 ohm		6.8 ohm	8.9662 mm
AD7507KN/+	Analog Devices		COMMERCIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	70 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28					.02 A								e0	BREAK-BEFORE-MAKE			1500 ns	550 ohm
AD8113JSTZ	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16		GULL WING	-12.6 V	-12 V	12 V	+-5/+-12	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	12.6 V	1.6 mm		14 mm	Not Qualified		83 dB	4.5 V	CAN ALSO BE OPERATED AT +/-5 VOLT SUPPLY FOR VIDEO APPLICATIONS	-4.5 V	e3		30	260					14 mm
LTC1391CGN#TRPBF	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING		-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm		3.9116 mm	Not Qualified		70 dB		CAN ALSO OPERATE WITH 2.7 V SUPPLY		e3		30	260	400 ns	75 ohm	200 ns	15 ohm	4.9 mm
AD8113JST	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16		GULL WING	-12.6 V	-12 V	12 V	+-5/+-12	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	TIN LEAD	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	12.6 V	1.6 mm		14 mm	Not Qualified		83 dB	4.5 V	CAN ALSO BE OPERATED AT +/-5 VOLT SUPPLY FOR VIDEO APPLICATIONS	-4.5 V	e0			240					14 mm
LTC1390CN#PBF	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS	THROUGH-HOLE		-5 V	5 V		IN-LINE			2.54 mm	70 Cel	MATTE TIN	DUAL	R-PDIP-T16		1		3.81 mm		7.62 mm	Not Qualified		70 dB		CAN ALSO OPERATE WITH 3 V SUPPLY		e3				400 ns	75 ohm	200 ns
LTC1380CGN	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING		-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB				e0				1500 ns	120 ohm	1200 ns	24 ohm	4.9 mm
AD7503JN	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.8 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16				5.33 mm	.02 A	7.62 mm	Not Qualified						e0					300 ohm		6.8 ohm	19.05 mm
MUX08EP	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	15 mA	1	8	JFET	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16	COMMON OUTPUT			5.33 mm	.025 A	7.62 mm	Not Qualified	NO	60 dB				e0	BREAK-BEFORE-MAKE			2000 ns	400 ohm	400 ns	40 ohm	20.13 mm
5962-01-201-1764	Analog Devices		COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel		DUAL	R-PDIP-T16	SEPARATE OUTPUT	1					Not Qualified	NC						BREAK-BEFORE-MAKE			1000 ns	125 ohm
AD7510DIJN	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.8 mA	4	1	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT			5.33 mm		7.62 mm	Not Qualified	NO			OVERVOLTAGE PROTECTION		e0	MAKE-BEFORE-BREAK				100 ohm		1 ohm	19.05 mm
LTC222CS#TRPBF	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.752 mm		3.899 mm	Not Qualified		75 dB		CAN ALSO OPERATE FROM SINGLE 5V SUPPLY		e3				400 ns	90 ohm	300 ns		9.906 mm
ADG201CJ	Analog Devices		COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel		DUAL	R-PDIP-T16	SEPARATE OUTPUT						Not Qualified	NC						BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	1000 ns	125 ohm
AD7512DIKN	Analog Devices	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T14	SEPARATE OUTPUT			4.32 mm		7.62 mm	Not Qualified	NO/NC			OVERVOLTAGE PROTECTION		e0					175 ohm		.75 ohm	16.51 mm
AD7510DIKP-REEL	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.966 mm	Not Qualified	NO			OVERVOLTAGE PROTECTION		e0			225		100 ohm		.75 ohm	8.966 mm
AD7512DIJPZ	Analog Devices	SPDT	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	2	1	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.9662 mm	Not Qualified				OVERVOLTAGE PROTECTION		e3			260		100 ohm		1 ohm	8.9662 mm
AD8113	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY		1			GULL WING				+-5/+-12	FLATPACK	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	70 Cel	TIN LEAD	QUAD	S-PQFP-G100	SEPARATE OUTPUT						Not Qualified						e0
LTC4305CGN	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1		GULL WING			3.3 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	5.5 V	1.75 mm		3.9 mm	Not Qualified			2.7 V			e0								4.8895 mm
LTC203CS#PBF	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.752 mm		3.899 mm	Not Qualified		75 dB				e3		30	260	400 ns	125 ohm	300 ns	3.25 ohm	9.906 mm
LTC203CN#PBF	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	70 Cel	MATTE TIN	DUAL	R-PDIP-T16		1		3.937 mm		7.62 mm	Not Qualified		75 dB				e3		30	260	400 ns	125 ohm	300 ns	3.25 ohm
AD7511DIKP-REEL	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT			4.57 mm		8.966 mm	Not Qualified	NC			OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE				100 ohm		.75 ohm	8.966 mm
AD7512DIJCHIPS	Analog Devices		COMMERCIAL							2		CMOS			-15 V	15 V	+-15		DIE OR CHIP	Multiplexer or Switches		70 Cel				SEPARATE OUTPUT						Not Qualified											175 ohm
AD7592DIKN	Analog Devices	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1.5 mA	2	1	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T14	SEPARATE OUTPUT			5.33 mm		7.62 mm	Not Qualified		85 dB		OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE			350 ns	90 ohm	350 ns	2 ohm	19.305 mm
AD7503KNZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.8 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	MATTE TIN	DUAL	R-PDIP-T16				5.33 mm	.035 A	7.62 mm	Not Qualified						e3				80 ns	300 ohm	80 ns	6.8 ohm	20.13 mm
LTC1393CGN	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS	GULL WING			5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		65 dB				e0				1500 ns	140 ohm	1200 ns	28 ohm	4.9 mm
LTC201ACS#TR	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.752 mm		3.899 mm	Not Qualified		75 dB				e0				400 ns	125 ohm	300 ns	3.25 ohm	9.906 mm
AD7510DIKNZ	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT			4.32 mm		7.62 mm	Not Qualified	NO			OVERVOLTAGE PROTECTION		e3					100 ohm		.75 ohm	19.055 mm
AD7591DIKN	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1.5 mA	4	1	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT			5.33 mm		7.62 mm	Not Qualified	NC	85 dB		OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE			400 ns	90 ohm	250 ns	2 ohm	20.13 mm
LTC1390CN	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS	THROUGH-HOLE		-5 V	5 V		IN-LINE			2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16		1		3.81 mm		7.62 mm	Not Qualified		70 dB		CAN ALSO OPERATE WITH 3 V SUPPLY		e0				400 ns	75 ohm	200 ns
AD7501KP	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	1	8	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.02 A	8.9662 mm	Not Qualified						e0					300 ohm		6.8 ohm	8.9662 mm
AD7501KN/+	Analog Devices		COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.8 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16					.02 A								e0					300 ohm
5962-01-078-8228	Analog Devices		COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel		DUAL	R-PDIP-T16	SEPARATE OUTPUT						Not Qualified	NO						MAKE-BEFORE-BREAK				175 ohm
5962-01-023-5035	Analog Devices		COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.8 mA	1	8	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel		DUAL	R-PDIP-T16					.035 A		Not Qualified											300 ohm
LTC221CN	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	70 Cel	TIN LEAD	DUAL	R-PDIP-T16				3.937 mm		7.62 mm	Not Qualified		75 dB		CAN ALSO OPERATE FROM SINGLE 5V SUPPLY		e0		20	235	400 ns	90 ohm	300 ns
ADG222KN/883B	Analog Devices		COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16	SEPARATE OUTPUT						Not Qualified	NO					e0	BREAK-BEFORE-MAKE

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.