Analog Devices Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
MAX4666CSE+	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V	+-4.5/+-20/4.5/36	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	62 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	275 ns	4 ohm	175 ns	.2 ohm	9.9 mm
MAX4730EXT+T	Analog Devices	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.7 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified		45 dB	1.8 V				e4		30	260	45 ns	5.5 ohm	26 ns	.02 ohm	2 mm
MAX4800ACQI	Analog Devices	SPST	COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	BCDMOS		J BEND			5 V	3/5	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT	1	6 V	4.57 mm		11.505 mm	Not Qualified	NO	33 dB	2.7 V				e3			245	5000 ns	38 ohm	5000 ns	1.9 ohm	11.505 mm
MAX4800ACXZ	Analog Devices	SPST	COMMERCIAL	26	LFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	BCDMOS		BALL			3 V		GRID ARRAY, LOW PROFILE, FINE PITCH			.64 mm	70 Cel	0 Cel		BOTTOM	R-PBGA-B26			6 V	1.32 mm		5.35 mm			77 dB	2.7 V								5000 ns	38 ohm	5000 ns	1.9 ohm	6 mm
MAX4800ACXZ+T	Analog Devices	SPST																																									NOT SPECIFIED	NOT SPECIFIED
MAX4932ETD+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	14	HVSON	SQUARE	YES	PLASTIC/EPOXY		2	3	BICMOS		NO LEAD			3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N14		1	5.5 V	.8 mm		3 mm			80 dB	1.8 V				e3		30	260		.75 ohm		.1 ohm	3 mm
MAX7356EUG+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING			3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24		1	3.6 V	1.1 mm		4.4 mm	Not Qualified			2.3 V				e3		30	260		55 ohm			7.8 mm
AD75019JPZ	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		J BEND		-12 V	12 V	5,+-12	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J44		3		4.57 mm		16.5862 mm	Not Qualified		92 dB					e3		30	260		300 ohm		20 ohm	16.5862 mm
AD8105ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY		1	32			BALL		-2.5 V	2.5 V	+-2.5/5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm		31 mm	Not Qualified		90 dB					e1			260					31 mm
ADG1213YRUZ	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.1 mm		4.4 mm	Not Qualified		75 dB	13.5 V	ALSO OPERATES AT +12 V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	125 ns	120 ohm		5 ohm	5 mm
ADG1308BRUZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.2 mm	.03 A	4.4 mm	Not Qualified		80 dB	13.5 V			-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	120 ns	210 ohm	150 ns	5 ohm	5 mm
ADG1607BRUZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	8	CMOS		GULL WING	-8 V	-5 V	5 V		SMALL OUTLINE	TSSOP28,.25		.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	COMMON OUTPUT	1	8 V	1.2 mm	1.1 A	4.4 mm	Not Qualified		62 dB	3.3 V		-3.3 V	-3.3 V	e3	BREAK-BEFORE-MAKE	30	260	188 ns	7.5 ohm	202 ns	.2 ohm	9.7 mm	8 V
ADG1633BCPZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED		3	1	CMOS		NO LEAD	-8 V	-5 V	5 V	+-3.3/+-8/3.3/16	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	8 V	.8 mm		3 mm	Not Qualified		64 dB	3.3 V			-3.3 V	e3	BREAK-BEFORE-MAKE	30	260	98 ns	5 ohm	259 ns	.12 ohm	3 mm
ADG201HSKNZ	Analog Devices	SPST	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS		THROUGH-HOLE	-16.5 V	-15 V	15 V		IN-LINE	DIP16,.3		2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16	SEPARATE OUTPUT		16.5 V	4.32 mm		7.62 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE		-13.5 V	e3	BREAK-BEFORE-MAKE			50 ns	75 ohm	50 ns	1.5 ohm	19.055 mm
ADG212AKRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING		-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified	NO	80 dB					e3	BREAK-BEFORE-MAKE	30	260	600 ns	115 ohm	450 ns		9.9 mm
ADG428BRZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	18	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.1 mA	1	8	CMOS		GULL WING		-15 V	15 V	+-15	SMALL OUTLINE	SOP18,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G18		1		2.65 mm	.03 A	7.5 mm	Not Qualified		75 dB					e3	BREAK-BEFORE-MAKE		260	150 ns	100 ohm	150 ns	10 ohm	11.55 mm
ADG444ABRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	16.5 V	1.75 mm		3.9 mm	Not Qualified	NC	60 dB	13.5 V	CAN ALSO OPERATE WITH 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	110 ns	70 ohm	60 ns	1 ohm	9.9 mm
ADG506ATE/883B	Analog Devices	SINGLE-ENDED MULTIPLEXER	MILITARY	28	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	1.5 mA	1	16	CMOS	MIL-STD-883 Class B	NO LEAD	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LCC28,.45SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	GOLD	QUAD	S-CQCC-N28			16.5 V	2.54 mm	.03 A	11.43 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e4	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	22.5 ohm	11.43 mm
ADG609BRZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	1	4	BICMOS		GULL WING	-5.5 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	9.9 mm
ADG609BRZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	1	4	BICMOS		GULL WING		-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1		1.75 mm	.02 A	3.9 mm	Not Qualified		85 dB		OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE			e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	9.9 mm
ADG620BRMZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e3	MAKE-BEFORE-BREAK		260	65 ns	6.5 ohm	330 ns	.7 ohm	3 mm
ADG636YRU-REEL7	Analog Devices	SPDT	AUTOMOTIVE	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G14		1	5.5 V	1.1 mm		4.4 mm	Not Qualified		65 dB	2.7 V			-2.7 V	e0			240	135 ns	115 ohm	80 ns	2 ohm	5 mm
ADG702BRMZ	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm		3 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE	30	260	20 ns	5 ohm	13 ns		3 mm
ADG702BRTZ-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2.9 mm
ADG712BRU-REEL	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY			e0	BREAK-BEFORE-MAKE	30	240	20 ns	8 ohm	12 ns	.1 ohm	5 mm
ADG731BSU	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	FLATPACK, THIN PROFILE, FINE PITCH	QFP48,.35SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G48		3	2.75 V	1.2 mm	.03 A	7 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY		-2.25 V	e0	BREAK-BEFORE-MAKE		240	75 ns	5.5 ohm	75 ns	.3 ohm	7 mm
ADG739BRUZ-REEL7	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm		4.4 mm	Not Qualified		75 dB	2.7 V				e3		30	260	70 ns	11 ohm	25 ns	.4 ohm	5 mm
ADGM1304JCPZ-RL7	Analog Devices	SP4T																							MATTE TIN				3												e3			260
ADRF5144BCCZN	Analog Devices	SPDT
DG406CWI+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	16	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28		1	20 V	2.65 mm	.02 A	7.5 mm	Not Qualified		69 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	100 ohm	150 ns	1.5 ohm	17.9 mm
DG408DJ+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	2 mA	1	8	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16		1	20 V	4.572 mm	.02 A	7.62 mm	Not Qualified		75 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	225 ns	100 ohm	300 ns	1.5 ohm	19.175 mm
DG412FEUE+T	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.1 mm		4.4 mm	Not Qualified		65 dB	4.5 V			-4.5 V	e3		30	260	175 ns	35 ohm	145 ns	.2 ohm	5 mm
DG419CY+T	Analog Devices	SPDT	COMMERCIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING		-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified		68 dB					e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	175 ns	3 ohm	4.9 mm
DG508AEWE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS		GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	18 V	2.65 mm	.02 A	7.5 mm	Not Qualified		68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	1500 ns	350 ohm	1000 ns	10.2 ohm	10.3 mm
DG509ADY+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.2 mA	1	4	CMOS		GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	18 V	1.75 mm	.02 A	3.9 mm	Not Qualified		68 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	1500 ns	450 ohm	1000 ns	27 ohm	9.9 mm
MAX14509AEEVB+T	Analog Devices	DPDT																							NICKEL GOLD PALLADIUM				1														30	260
MAX14866UWZ+	Analog Devices	SPST	OTHER	110	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	DIMOS		BALL			1.8 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	0 Cel	TIN SILVER COPPER NICKEL	BOTTOM	R-PBGA-B110		1	5.5 V	.69 mm		5.438 mm			75 dB	1.7 V				e2		30	260	4000 ns	13 ohm	4000 ns	.21 ohm	5.498 mm
MAX14866UWZ+T	Analog Devices	SPST	OTHER	48	HQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1	DIMOS		NO LEAD			5 V		CHIP CARRIER, HEAT SINK/SLUG				85 Cel	0 Cel	TIN SILVER COPPER NICKEL	QUAD	S-PQCC-N48		1	5.25 V						75 dB	4.75 V	IT ALSO HAS 1.7 TO 5.5V LOGIC SUPPLY VOLTAGE			e2		30	260	4000 ns	13 ohm	4000 ns	.21 ohm
MAX308CUE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS		GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	20 V	1.1 mm	.03 A	4.4 mm	Not Qualified		75 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	1.5 ohm	5 mm
MAX319ESA+	Analog Devices	SPDT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.005 mA	1	1	CMOS		GULL WING		-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified		68 dB					e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	175 ns	2 ohm	4.9 mm
MAX320EUA+T	Analog Devices	SPST	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-8 V	-5 V	5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	8 V	1.11 mm		3 mm	Not Qualified		72 dB	2.7 V			-2.7 V	e3		30	260	150 ns	35 ohm	100 ns	.3 ohm	3 mm
MAX4066ACEE+	Analog Devices	SPST	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	5.5 V	1.75 mm		3.9 mm	Not Qualified			4.5 V				e3		30	260	125 ns	75 ohm	75 ns	.3 ohm	4.89 mm
MAX4740HETE+	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	BICMOS		NO LEAD			3.3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	1 mm		3 mm	Not Qualified		64 dB	1.6 V				e3		30	260	70 ns	.9 ohm	55 ns	.06 ohm	3 mm
MUX08EPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	JFET		THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDIP-T16				5.33 mm		7.62 mm	Not Qualified		60 dB		OVERVOLTAGE PROTECTION			e3				2000 ns	300 ohm	400 ns	15.4 ohm	20.13 mm
5962-8966901EA	Analog Devices	SPST	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		4	1	BIPOLAR	MIL-STD-883	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T16	SEPARATE OUTPUT			5.08 mm		7.62 mm	Qualified	NO/NC	58 dB					e0	BREAK-BEFORE-MAKE			500 ns	80 ohm	400 ns	8 ohm	19.05 mm
AD8184ARZ-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	5.7 mA	1	4	BIPOLAR		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G14		1		1.75 mm		3.9 mm	Not Qualified		115 dB					e3		30	260					8.65 mm
ADG1234YCPZ-REEL	Analog Devices	SPDT	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20	SEPARATE OUTPUT	3	16.5 V	1 mm		4 mm	Not Qualified		80 dB	13.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	140 ns	190 ohm	45 ns	3.5 ohm	4 mm
ADG1408SRU-EP	Analog Devices	SINGLE-ENDED MULTIPLEXER	MILITARY	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.42 mA	1	8	BICMOS		GULL WING	-5.5 V	-5 V	5 V	+-15/+12/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	5.5 V	1.2 mm	.19 A	4.4 mm	Not Qualified		70 dB	4.5 V			-4.5 V	e0	BREAK-BEFORE-MAKE			440 ns	9 ohm	370 ns	.3 ohm	5 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.