Analog Devices Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
MAX313EUE+T	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.1 mm		4.4 mm	Not Qualified	NC	65 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	225 ns	10 ohm	185 ns	.3 ohm	5 mm
MAX314CPE+	Analog Devices	SPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS	THROUGH-HOLE	-20 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	20 V	4.572 mm		7.62 mm	Not Qualified	NO/NC	65 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	275 ns	10 ohm	235 ns	.3 ohm	19.175 mm
MAX325CUA+T	Analog Devices	SPST	COMMERCIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	GULL WING			5 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1		1.1 mm		3 mm	Not Qualified	NO/NC	72 dB				e3	BREAK-BEFORE-MAKE	30	260	150 ns	60 ohm	100 ns	.8 ohm	3 mm
MAX333CWP+	Analog Devices	SPDT	COMMERCIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1		2.65 mm		7.5 mm	Not Qualified		72 dB				e3	BREAK-BEFORE-MAKE	30	260	1000 ns	175 ohm	500 ns		12.8 mm
MAX333CWP+T	Analog Devices	SPDT	COMMERCIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1		2.65 mm		7.5 mm	Not Qualified		72 dB				e3	BREAK-BEFORE-MAKE	30	260	1000 ns	175 ohm	500 ns		12.8 mm
MAX366EPA+	Analog Devices	SPST	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		3	1	CMOS	THROUGH-HOLE		-22 V	22 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T8		1	18 V	4.572 mm		7.62 mm	Not Qualified			2.25 V	SIGNAL LINE CIRCUIT PROTECTOR		e3		30	260		100 ohm			9.375 mm
MAX3841ETG+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2	BICMOS	NO LEAD			3.3 V	1.8/3.3,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N24	SEPARATE OUTPUT	1	3.6 V	.8 mm		4 mm	Not Qualified			3 V			e3		30	260	.03 ns		.03 ns		4 mm
MAX4315ESE+	Analog Devices	VIDEO MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	9.4 mA	1	8	BIPOLAR	GULL WING			5 V	5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	10.5 V	1.75 mm	.12 A	3.9 mm	Not Qualified		82 dB	4 V			e3		30	260					9.9 mm
MAX4558ESE+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS	GULL WING	-6 V	-5 V	5 V	3/3.3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.75 mm	.01 A	3.9 mm	Not Qualified		96 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	160 ohm	120 ns	2 ohm	9.9 mm
MAX4558ESE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	8	CMOS	GULL WING	-6 V	-5 V	5 V	3/3.3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.75 mm	.01 A	3.9 mm	Not Qualified		96 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	160 ohm	120 ns	2 ohm	9.9 mm
MAX4613EUE+T	Analog Devices	SPST	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.1 mm		4.4 mm	Not Qualified	NO/NC	60 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	250 ns	70 ohm	120 ns		5 mm
MAX4617CPE+	Analog Devices	SINGLE-ENDED MULTIPLEXER																						Matte Tin (Sn) - annealed				1											e3		30	260
MAX4626EUK+T	Analog Devices	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm		1.625 mm	Not Qualified	NO	51 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	90 ns	.8 ohm	50 ns	.1 ohm	2.9 mm
MAX4647EUT-T+	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	20 V	1.45 mm		1.625 mm	Not Qualified		92 dB	4.5 V	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 9V TO 36V	-4.5 V	e3				100 ns	25 ohm	100 ns		2.9 mm
MAX4647EUT+T	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-20 V	-15 V	15 V	12/+-15	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	20 V	1.45 mm		1.625 mm	Not Qualified	NC	92 dB	4.5 V	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 9V TO 36V	-4.5 V	e4	BREAK-BEFORE-MAKE	30	260	100 ns	25 ohm	100 ns	2 ohm	2.9 mm
MAX4674ETE+T	Analog Devices	SINGLE-ENDED MULTIPLEXER																						Matte Tin (Sn) - annealed				1											e3		30	260
MAX4802ACCM+	Analog Devices	SPST	COMMERCIAL	48	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	1	BCDMOS	GULL WING			5 V	3/5	FLATPACK	QFP48,.35SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	SEPARATE OUTPUT	1	6 V	1.6 mm		7 mm	Not Qualified	NO	33 dB	2.7 V			e3		30	260	5000 ns	38 ohm	5000 ns	1.9 ohm	7 mm
MAX4802ACCM	Analog Devices	SPST	COMMERCIAL	48	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	1	BCDMOS	GULL WING			5 V	3/5	FLATPACK	QFP48,.35SQ,20	Multiplexer or Switches	.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQFP-G48	SEPARATE OUTPUT	1	6 V	1.6 mm		7 mm	Not Qualified	NO	33 dB	2.7 V			e3		30	260	5000 ns	38 ohm	5000 ns	1.9 ohm	7 mm
5962-89710023A	Analog Devices	DIFFERENTIAL MULTIPLEXER	MILITARY	28	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	1.5 mA	1	8	CMOS	NO LEAD		-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LCC28,.45SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	TIN LEAD	QUAD	S-CQCC-N28				2.54 mm	.04 A	11.43 mm	Qualified						e0	BREAK-BEFORE-MAKE			400 ns	450 ohm	400 ns		11.43 mm
AD7510DISQ	Analog Devices	SPST	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		4	1	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T16	SEPARATE OUTPUT			6.3 mm		7.62 mm	Not Qualified	NO			OVERVOLTAGE PROTECTION		e0	MAKE-BEFORE-BREAK			1000 ns	175 ohm	1000 ns	.75 ohm	19.81 mm
ADG452BR-REEL7	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-5 V	5 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO	65 dB	4.5 V	ALSO OPERATE WITH 12V SINGLE SUPPLY	-4.5 V	e0	BREAK-BEFORE-MAKE		240	220 ns	12 ohm	140 ns	.3 ohm	9.9 mm
ADG608BRZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.002 mA	1	8	BICMOS	GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16		1	5.5 V	1.75 mm	.02 A	3.9 mm	Not Qualified		85 dB	4.5 V	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	75 ns	30 ohm	75 ns	2 ohm	9.9 mm
ADG613YRUZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	4	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.01 A	4.4 mm	Not Qualified	NO/NC	65 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	260 ns	115 ohm	65 ns	2 ohm	5 mm
ADG713BRZ-REEL	Analog Devices	SPST	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	58 dB	1.8 V	CAN ALSO OPERATE WITH 5 V SUPPLY		e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	12 ns	.1 ohm	9.9 mm
MAX4510EUT+T	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	20 V	1.45 mm		1.625 mm	Not Qualified		62 dB	4.5 V		-4.5 V	e4		30	260	500 ns	160 ohm	175 ns		2.9 mm
MAX4520EUT+T	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	20 V	1.45 mm		1.625 mm	Not Qualified		62 dB	4.5 V		-4.5 V	e4		30	260	500 ns	160 ohm	175 ns		2.9 mm
MAX4740EVE+	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	BICMOS	NO LEAD			3.3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	.55 mm		2.5 mm	Not Qualified		64 dB	1.6 V			e3		30	260	70 ns	.9 ohm	55 ns	.06 ohm	2.5 mm
MAX4740HETE+T	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	BICMOS	NO LEAD			3.3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	1 mm		3 mm	Not Qualified		64 dB	1.6 V			e3		30	260	70 ns	.9 ohm	55 ns	.06 ohm	3 mm
MAX4968AECM+T	Analog Devices	SPST																						Matte Tin (Sn) - annealed				1											e3		30	260
MUX08FPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	JFET	THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16				5.33 mm		7.62 mm	Not Qualified		60 dB		OVERVOLTAGE PROTECTION		e3				2000 ns	400 ohm	400 ns	27 ohm	20.13 mm
MAX4624EZT+T	Analog Devices	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			5 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.6 mm	Not Qualified		57 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	50 ns	1 ohm	50 ns	.06 ohm	2.9 mm
ADGM1304JCPZ-R2	Analog Devices	SP4T																										3													30	260
ADG802BRTZ-500RL7	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	61 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	55 ns	.6 ohm	15 ns		2.9 mm
MAX395EAG+	Analog Devices	SPST	INDUSTRIAL	24	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		8	1	CMOS	GULL WING		-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24		1		1.99 mm		5.29 mm	Not Qualified		90 dB				e3		30	260	400 ns	100 ohm	400 ns	5 ohm	8.2 mm
MAX4624EUT+T	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			5 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.625 mm	Not Qualified		57 dB	1.8 V	IT CAN ALSO OPERATE WITH 3 V SUPPLY		e3	BREAK-BEFORE-MAKE	30	260	50 ns	1 ohm	50 ns	.06 ohm	2.9 mm
AD7512DIJN	Analog Devices	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.8 mA	2	1	CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14	SEPARATE OUTPUT			5.33 mm		7.62 mm	Not Qualified				OVERVOLTAGE PROTECTION		e0					100 ohm		1 ohm	19.305 mm
AD7512DIJN/+	Analog Devices		COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2		CMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14	SEPARATE OUTPUT												e0					175 ohm
ADG4612BCPZ-REEL7	Analog Devices	SPST	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	105 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	5.5 V	.8 mm		3 mm	Not Qualified	NO	54 dB	3 V		-3 V	e3	MAKE-BEFORE-BREAK	30	260	149 ns	6.1 ohm	149 ns	.05 ohm	3 mm
ADG529AKP	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS	J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	5 ohm	8.965 mm
ADN4605ABPZ	Analog Devices	CROSS POINT SWITCH		352		SQUARE	YES	PLASTIC/EPOXY					BALL					GRID ARRAY						MATTE TIN	BOTTOM	S-PBGA-B352		3					Not Qualified						e3		30	260
MAX4734EUB+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS	GULL WING			1.8 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10		1	3.6 V	1.1 mm	.15 A	3 mm	Not Qualified		56 dB	1.6 V			e3	BREAK-BEFORE-MAKE	30	260	30 ns	2 ohm	25 ns		3 mm
ADG1409YCPZ-REEL7	Analog Devices	DIFFERENTIAL MULTIPLEXER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	1	4	CMOS	NO LEAD	-5.5 V	-5 V	5 V	+-15/+12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N16		3	5.5 V	1 mm	.03 A	4 mm	Not Qualified		70 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE		260	330 ns	9 ohm	285 ns	.78 ohm	4 mm
ADG507AKRUZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	GULL WING	-16.5 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G28		1	16.5 V	1.2 mm		4.4 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e3		30	260	300 ns	450 ohm	300 ns	22.5 ohm	9.7 mm
AD8111ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BIPOLAR	GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm		12 mm	Not Qualified		99 dB	4.5 V		-4.5 V	e3		30	260					12 mm
SW06BQ	Analog Devices	SPST	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		4	1	BIMOS	THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T16	SEPARATE OUTPUT			5.08 mm		7.62 mm	Not Qualified	NO/NC	58 dB				e0	BREAK-BEFORE-MAKE			500 ns	80 ohm	400 ns	5 ohm	19.05 mm
ADN4612ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	88	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12		NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N88		3	2.75 V	.85 mm		12 mm				2.25 V	ALSO REQUIRED ANALOG REFERENCE VOLTAGE 1.6 TO 2V		e3		30	260					12 mm
DG411CY+	Analog Devices	SPST	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS	GULL WING	-20 V	-15 V	15 V	5,12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NC	68 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	45 ohm	145 ns	3 ohm	9.9 mm
MAX335EWG+	Analog Devices	SPST	INDUSTRIAL	24	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		8	1	CMOS	GULL WING	-20 V	-15 V	15 V	5,+-15	SMALL OUTLINE	SOP24,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	SEPARATE OUTPUT	1	20 V	2.65 mm		7.5 mm	Not Qualified		90 dB	4.5 V		-4.5 V	e3		30	260	400 ns	150 ohm	400 ns		15.4 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.