INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold
NCP305LSQ30T1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0036 mA		1	1	CMOS		GULL WING	1.5 V	0.8/10		SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G4	1	10 V	1.1 mm	1.25 mm	Not Qualified	.8 V	DETECTION THRESHOLD VOLTAGE IS 3V	e3	30		260	+3V	2 mm	NO
NCP803SN263T1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0025 mA		1	1			GULL WING	3.3 V	1.2/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	105 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G3	1	5.5 V	1.11 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 2.63V	e3	40		260	+2.63V	2.9 mm	NO
STM6717TGWY6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	20 mA		1	1			GULL WING	3.3 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V	RESET THRESHOLD VOLTAGES ARE 3.075V AND 1.110V; MANUAL RESET INPUT	e4	30		260	+3.075,1.110V	2.9 mm	YES
STM809LWX6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.015 mA		1	1			GULL WING	3.3 V	1.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 4.63V	e3	30		260	+4.63V	2.92 mm	NO
TPS2041CDBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	1			GULL WING	5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	2	5.5 V	1.45 mm	1.6 mm		4.5 V		e4	30		260		2.9 mm	NO
TPS2113ADRBT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.09 mA		1	2			NO LEAD	2.8 V	1.8/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N8	2	5.5 V	1 mm	3 mm	Not Qualified	1.5 V	CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS	e4	30		260		3 mm	YES
TPS2379DDAR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HLSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.85 mA		1	1			GULL WING	1.4 V	40/57		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)		DUAL	R-PDSO-G8	2	57 V	1.7 mm	3.9 mm	Not Qualified	0 V		e4	NOT SPECIFIED		260		4.9 mm	NO
ADM1060ARUZ	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	28	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	7			GULL WING		3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G28	1	6 V	1.2 mm	4.4 mm	Not Qualified	2 V		e3	30		260		9.7 mm	YES
BQ24298RTWT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1			NO LEAD			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N24	2	6.2 V	.8 mm	4 mm		3.9 V		e4	30		260	+6.4V	4 mm	YES
BQ76PL455APFCR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	80	TFQFP	SQUARE	YES		PLASTIC/EPOXY	7 mA		1	16			GULL WING	57.6 V			FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G80	3	79.2 V	1.2 mm	12 mm		12 V		e4	30		260		12 mm	YES
CAT811LTBI-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	LSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.02 mA		1	1			GULL WING	5 V	5		SMALL OUTLINE, LOW PROFILE	TO-253	Power Management Circuits	1.92 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G4	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 4.63V; MANUAL RESET INPUT	e4	30		260	+4.63V	2.9 mm	NO
HV7802MG-G	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G8	1	450 V	1.1 mm	3 mm	Not Qualified	8 V		e3	40		260		3 mm	NO
TL7705BIDR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BIPOLAR		GULL WING	5 V	3.6/18		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	2	18 V	1.75 mm	3.9 mm	Not Qualified	3.6 V	POWER-ON RESET GENERATOR	e4	30		260	4.55	4.9 mm	YES
TPS2066CDR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.12 mA		1	2			GULL WING	5 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm		4.5 V		e4	NOT SPECIFIED		260		4.9 mm	NO
TPS3824-33DBVR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1	CMOS		GULL WING	3.3 V	2.5/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 2.93V	e4	NOT SPECIFIED		260	+2.93V	2.9 mm	NO
BQ40Z50RSMT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD	14.4 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	2	26 V	1 mm	4 mm		2.2 V		e4	30		260		4 mm	YES
DS1832S	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1	CMOS		GULL WING	3.3 V	1.2/5.5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1.2 V	WATCHDOG TIMER	e0			245	+2.55/2.88V	4.9 mm	NO
DS1832S+	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1	CMOS		GULL WING	3.3 V	1.2/5.5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1.2 V	WATCHDOG TIMER	e3	30		260	+2.55/2.88V	4.9 mm	NO
FPF2195	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			BALL	3.3 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel		-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)		BOTTOM	R-PBGA-B6	1	5.5 V	.625 mm	1 mm	Not Qualified	1.8 V		e1	NOT SPECIFIED		NOT SPECIFIED		1.5 mm	YES
LTC1731ES8-8.4#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING	9 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G8	1	12 V	1.75 mm	3.9 mm	Not Qualified	8.8 V		e3	30		260		4.9 mm	YES
LTC4065EDC-4.4#TRMPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD	5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-N6	1	5.5 V	.8 mm	2 mm	Not Qualified	3.75 V		e3	30		260		2 mm	YES
MAX809LTRG	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0025 mA		1	1	CMOS		GULL WING	3.3 V	1/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	105 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	5.5 V	1.11 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 4.63V	e3	30		260	+4.63V	2.9 mm	NO
MC33064P-5G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TO-226	ROUND	NO		PLASTIC/EPOXY	.5 mA		1	1	BIPOLAR		THROUGH-HOLE	4 V	5		CYLINDRICAL	SIP3,.1,50	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	MATTE TIN		BOTTOM	O-PBCY-T3		6.5 V			Not Qualified	1 V		e3				+4.6V		NO
MC34PF3000A7EPR2	NXP Semiconductors	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES		UNSPECIFIED			1	12	MOS		NO LEAD	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel		-40 Cel	TIN		QUAD	S-XQCC-N48	3	4.5 V	.9 mm	7 mm		2.8 V	ALSO OPERATES WITH 3.7V TO 5.5V; ALSO OPERATES WITH COIN CELL VOLTAGE OF 1.8 TO 4.5V	e3	40		260		7 mm	YES
TC54VN2702ECB713	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.004 mA		1	1	CMOS	TS 16949	GULL WING	2 V	0.7/10		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	10 V	1.45 mm	1.5 mm	Not Qualified	.7 V	DETECTOR THRESHOLD VOLTAGE IS 2.7V	e3			260	+2.7V	2.9 mm	NO
TPS2065DGNR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.07 mA		1	1			GULL WING	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)		DUAL	S-PDSO-G8	1	5.5 V	1.07 mm	3 mm	Not Qualified	2.7 V	UNDERVOLTAGE LOCKOUT	e4	NOT SPECIFIED		260		3 mm	NO
TPS3307-33DGNG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	3	CMOS		GULL WING	3.3 V	2/6		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 4.55V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4	30		260	+1.25,2.93,4.55V	3 mm	YES
BQ24195LRGER	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	2.5 mA		1	1			NO LEAD		3.9/17	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N24	2	17 V	1 mm	4 mm	Not Qualified	3.9 V		e4	NOT SPECIFIED		260	+18V	4 mm	NO
ICL7665SAIBAZA-T	Renesas Electronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	2	CMOS		GULL WING	5 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1	16 V	1.75 mm	3.9 mm		1.8 V		e3	30		260		4.9 mm	YES
ISL88031IU8EAZ-TK	Renesas Electronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	5			GULL WING	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-G8	2	5.5 V	1.1 mm	3 mm		2 V	DETECTION THRESHOLD VOLTAGE IS 2.866	e3	30		260	+2.866V	3 mm	YES
LTC2912IDDB-2#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		NO LEAD	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-N8	1	6 V	.8 mm	2 mm	Not Qualified	2.3 V		e3	30		260		3 mm	YES
MCP130T-450I/TT	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.06 mA		1	1	CMOS		GULL WING	5 V	1/5.5		SMALL OUTLINE, THIN PROFILE	TO-236	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1 V		e3	40		260	+4.38V	2.92 mm	NO
O917A130TRGZRQ1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	2700 kHz	PLASTIC/EPOXY		7 A	1	10			NO LEAD	3.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel	.7 V	-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	QUAD	S-PQCC-N48	3	5.25 V	1 mm	7 mm		3.135 V		e4	30	10	260		7 mm	YES
TPS3307-25DGNR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	3			GULL WING	3.3 V	2/6		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.93V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4	30		260	+1.25,2.25,2.93V	3 mm	YES
ADM691AARWZ	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING	4.75 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	0 V	RESET THRESHOLD VOLTAGE IS 4.65V	e3	30		260	+4.65V	10.25 mm	NO
APX824-31W5G-7	Diodes Incorporated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	1			GULL WING		1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	3	5.5 V	1.3 mm	1.6 mm	Not Qualified	1.1 V	MANUAL RESET INPUT; RESET THRESHOLD VOLTAGE IS 3.08V	e3	30		260	+3.08V	3 mm	NO
LM3658SDX/NOPB	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	1000 mA		1	1			NO LEAD	5 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	.8 mm	3 mm	Not Qualified	4.5 V	RESTART THRESHOLD VOLTAGE IS 4 VOLT	e3	30		260	+4V	3 mm	YES
MAX8903AETI+T	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED	4 mA		1	1	BICMOS		NO LEAD	5 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16SQ,16	Power Management Circuits	.4 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		QUAD	S-XQCC-N28	1	16 V	.8 mm	4 mm	Not Qualified	4.15 V		e3	30		260		4 mm	NO
MC34PF3000A1EPR2	NXP Semiconductors	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES		UNSPECIFIED			1	12	MOS		NO LEAD	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel		-40 Cel	TIN		QUAD	S-XQCC-N48	3	4.5 V	.9 mm	7 mm		2.8 V	ALSO REQUIRE SUPPLY VOLTAGE 3.7V TO 5.5V	e3	40		260		7 mm	YES
MIC2775-31YM5-TR	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING	3.5844 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.5 V	NOMINAL THRESHOLDVOLTAGE IS 3.09; MANUAL RESET INPUT	e4	40		260	+3.09V	2.9 mm	NO
TPS2375DR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.45 mA		1	1			GULL WING	48 V	48		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	57 V	1.75 mm	3.9 mm	Not Qualified	0 V		e4	30		260		4.9 mm	NO
BQ25730RSNR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD	5 V		BUCK-BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.16SQ,16		.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	1	26 V	.8 mm	4 mm		3.5 V		e4	30		260	+2.55V	4 mm	YES
BQ27541DRZR-V200	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	12	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			NO LEAD	3.6 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-N12	2	5.5 V	1 mm	2.5 mm	Not Qualified	2.7 V		e4	NOT SPECIFIED		260		4 mm	YES
LTC2944IDD#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	1	CMOS		NO LEAD	30 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-N8	1	60 V	.8 mm	3 mm		3.6 V		e3			260		3 mm	YES
MAX17055EWL+	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	9	VFBGA	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			BALL				GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel		-40 Cel	TIN SILVER COPPER NICKEL		BOTTOM	R-PBGA-B9	1	4.9 V	.69 mm	1.407 mm		2.3 V		e2	30		260		1.498 mm	NO
MAX5932ESA	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BICMOS		GULL WING	24 V	24		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1	80 V	1.75 mm	3.9 mm	Not Qualified	9 V		e0			245		4.9 mm	YES
MAX5932ESA+	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BICMOS		GULL WING	24 V	24		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G8	1	80 V	1.75 mm	3.9 mm	Not Qualified	9 V		e3	30		260		4.9 mm	YES
TLC7701IPWRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	BICMOS		GULL WING	2.7 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	6 V	1.2 mm	3 mm	Not Qualified	2 V	POWER-ON RESET GENERATOR	e4	NOT SPECIFIED		260	+1.1V	4.4 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.