INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Control Mode	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Maximum Input Voltage
BQ25302RTER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY			1	1			NO LEAD		5 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	1	6.2 V	.8 mm	3 mm		4 V				e4	30	260	+6.4V	3 mm	YES
BQ27510DRZT-G2	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	12	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			NO LEAD		3.6 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N12	2	5.5 V	1 mm	2.5 mm	Not Qualified	2.7 V				e4	30	260		4 mm	YES
LTC4364IDE-1#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		NO LEAD		12 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-N14	1	80 V	.8 mm	3 mm		4 V		RESET THRESHOLD VOLTAGE IS 2.2 VOLT		e3	30	260	+2.2V	4 mm	YES
LTC6803IG-4#PBF	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	44	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING		43.2 V			SMALL OUTLINE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G44		55 V	2 mm	5.3 mm		4 V				e3				12.8 mm	NO
MAX17435ETG+T	Analog Devices		INDUSTRIAL	24	QCCN	SQUARE	YES	PLASTIC/EPOXY	2.5 mA				BICMOS		NO LEAD		5 V	5		CHIP CARRIER	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N24	1				Not Qualified					e3	30	260
MIC2774N-44YM5-TR	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	2			GULL WING		5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	4.5 V		NOMINAL THRESHOLDVOLTAGE IS 4.43; MANUAL RESET INPUT		e4	40	260	+4.43V	2.9 mm	YES
MIC6315-26D3UY-TR	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.015 mA		1	1			GULL WING		3.6 V			SMALL OUTLINE, THIN PROFILE	TO-253		1.9 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G4	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1 V		MANUAL RESET INPUT; RESET THRESHOLD VOLTAGE IS 2.63V		e4	40	260	+2.63V	2.86 mm	NO
STM811TW16F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.015 mA		1	1			GULL WING		3.3 V	1.5/5		SMALL OUTLINE, THIN PROFILE	TO-253	Power Management Circuits	1.92 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G4	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1.2 V		RESET THRESHOLD VOLTAGE IS 3.08V		e3	30	260	+3.08V	2.92 mm	NO
TPS2066DR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.09 mA		1	1			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED	260		4.9 mm	NO
TPS25944LRVCR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES	UNSPECIFIED	.3 mA	5.2 A	1	1			NO LEAD		3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-XQCC-N20	2	18 V	.8 mm	3 mm		2.7 V				e4	NOT SPECIFIED	260	+2.2V	4 mm	YES
UCC29002DRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	3.5 mA		1	1	BICMOS		GULL WING		12 V	12		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	105 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified					e4	30	260		4.9 mm	YES
AP9101CK6-AETRG1	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING		3.5 V			SMALL OUTLINE, THIN PROFILE			.95 mm	85 Cel		-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G6		5.5 V	1.1 mm	1.6 mm		1.5 V				e3	30	260		3 mm	NO
ISL88031IU8EAZ	Renesas Electronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY			1	5			GULL WING		5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	S-PDSO-G8	2	5.5 V	1.1 mm	3 mm		2 V		DETECTION THRESHOLD VOLTAGE IS 2.866		e3	30	260	+2.866V	3 mm	YES
LTC2954IDDB-2#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		NO LEAD					SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-N8	1	26.4 V	.8 mm	2 mm	Not Qualified	2.7 V				e3	30	260		3 mm	YES
LTC4364IS-1#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING		12 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	80 V	1.752 mm	3.9 mm		4 V		RESET THRESHOLD VOLTAGE IS 2.2 VOLT		e3	30	260	+2.2V	9.906 mm	YES
MAX708ESA-TG	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.028 mA		1	1			GULL WING		3.3 V	1/5.5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1 V				e3	30	260	+4.38V	4.9 mm	NO
MAX745EAP	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			GULL WING		18 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	24 V	1.99 mm	5.29 mm	Not Qualified	6 V				e0				7.2 mm
MAX745EAP+	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			GULL WING		18 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Power Management Circuits	.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	24 V	1.99 mm	5.29 mm	Not Qualified	6 V				e3	30	260		7.2 mm
S-1011A70-M6T1U4	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING		4.5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	Tin (Sn)	DUAL	R-PDSO-G6		36 V	1.35 mm	1.6 mm		1.8 V		DETECTION VOLTAGE 7.0 V		e3	10	260	+7.0V	2.9 mm	NO
TL7700CDGKR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	1 mA		1	1	BIPOLAR		GULL WING		3 V	2/36		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP8,.19,25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	40 V	1.1 mm	3 mm	Not Qualified	1.8 V				e4	30	260	+0.5V	3 mm	YES
TPS2041BDGNG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES	PLASTIC/EPOXY	.07 mA		1	1			GULL WING		3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED	260		3 mm	NO
TPS24701DGKR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	1.4 mA	500 A	1	1			GULL WING		12 V	12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	S-PDSO-G8	1	18 V	1.1 mm	3 mm	Not Qualified	2.5 V				e4	30	260		3 mm	YES
TPS3305-18DGNR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES	PLASTIC/EPOXY	.04 mA		1	2	CMOS		GULL WING		3.3 V	3/5		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2.7 V		RESET THRESHOLD IS 2.93V, POWER ON RESET GENERATOR		e4	30	260	+1.68V	3 mm	NO
TPS3809L30DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.025 mA		1	1			GULL WING		3 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G3	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 2.64V		e4	NOT SPECIFIED	260	+2.64V	2.9 mm	NO
UC2903DW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	18	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	15 mA		1	4	BIPOLAR		GULL WING		15 V			SMALL OUTLINE	SOP18,.4	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G18	2	40 V	2.65 mm	7.5 mm	Not Qualified	8 V				e4	30	260	1.8	11.55 mm	YES
XC8111AA010R-G	Torex Semiconductor	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	VFBGA	SQUARE	YES	PLASTIC/EPOXY			1	1			BALL		3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA4,2X2,.14		.35 mm	105 Cel		-40 Cel		BOTTOM	S-PBGA-B4		6 V	.5 mm	.82 mm		0 V					NOT SPECIFIED	NOT SPECIFIED		.82 mm	NO
ADM708ARZ-REEL	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.25 mA		1	1			GULL WING		5 V	5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 4.4V; MANUAL RESET INPUT		e3	30	260	+4.4V	4.9 mm	NO
APX824-26W5G-7	Diodes Incorporated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA		1	1			GULL WING			1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	3	5.5 V	1.3 mm	1.6 mm	Not Qualified	1.1 V		MANUAL RESET INPUT; RESET THRESHOLD VOLTAGE IS 2.63V		e3	30	260	+2.63V	3 mm	NO
BQ24072TRGTT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD		5 V	4.5/6.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	6.4 V	1 mm	3 mm	Not Qualified	4.35 V		DETECTION THRESHOLD VOLTAGE IS 0.08V; I/P ACCEPTS UP TO 26V WITHOUT DAMAGE, BUT OPERATN IS SUSPENDED		e4	NOT SPECIFIED	260	+6.6V	3 mm	YES
BQ294502DRVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES	PLASTIC/EPOXY	.002 mA		1	1			NO LEAD		10.8 V	3/15		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N6	1	25 V	.8 mm	2 mm	Not Qualified	3 V		Battery over-voltage protection(Min/Max)(V) : 4.35 and 4.35		e4	NOT SPECIFIED	260		2 mm	NO
CAT811STBI-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	LSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.015 mA		1	1			GULL WING		3.3 V	3.3		SMALL OUTLINE, LOW PROFILE	TO-253	Power Management Circuits	1.92 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G4	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1.2 V		RESET THRESHOLD VOLTAGE IS 2.93V; MANUAL RESET INPUT		e4	30	260	+2.93V	2.9 mm	NO
LM3658SD-B/NOPB	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY	1000 mA		1	1			NO LEAD		5 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	S-PDSO-N10	1	6 V	.8 mm	3 mm	Not Qualified	4.5 V		RESTART THRESHOLD VOLTAGE IS 4 VOLT		e3	30	260	+4V	3 mm	YES
LTC2907ITS8#TRMPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	2			GULL WING		2.5 V			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1		1 mm	1.625 mm	Not Qualified					e3		260		2.9 mm	YES
LTC4006EGN-6#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	5 mA		1	1			GULL WING		20 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.899 mm	Not Qualified	6 V				e3	30	260	+4.7V	4.8895 mm	YES
MAX1736EUT42-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1				GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1		1.45 mm	1.625 mm	Not Qualified		10 V		4.7 V	e0		245		2.9 mm		22 V
MAX1736EUT42+T	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1				GULL WING					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm				Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6	1		1.45 mm	1.625 mm						e3	30	260		2.9 mm
MCP73831-2ATI/MC	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA		1	1		TS 16949	NO LEAD		5.2 V	3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-N8	1	6 V	1 mm	2 mm	Not Qualified	3.75 V				e3	40	260	+4.20V	3 mm	YES
MIC2775-29YM5	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			GULL WING		3.3 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	1	3.63 V	1.45 mm	1.6 mm	Not Qualified	2.97 V		NOMINAL THRESHOLDVOLTAGE IS 2.93; MANUAL RESET INPUT		e3			+2.93V	2.9 mm	NO
MIC2775-29YM5TX	Micrel	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING		3.3 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	3.63 V	1.45 mm	1.6 mm	Not Qualified	2.97 V				e4			+2.93V	2.9 mm	NO
MIC2775-29YM5-TX	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING		3.3 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	3.63 V	1.45 mm	1.6 mm		2.97 V				e4			+2.93V	2.9 mm	NO
NCP367DPMUECTBG	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY	.13 mA		1	1			NO LEAD		5 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-N8	1	28 V	1 mm	2 mm	Not Qualified	1.2 V				e3	30	260		2.2 mm	YES
STC4054GR	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA		1	1	CMOS		GULL WING		5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	6.5 V	1.1 mm	1.6 mm	Not Qualified	4.25 V				e4				2.9 mm	YES
TPS3836K33DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING		1.8 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.6 mm	Not Qualified	1.6 V		RESET THRESHOLD VOLTAGE IS 2.93V		e4	NOT SPECIFIED	260		2.9 mm	NO
AP2331W-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			GULL WING		5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G3	1	5.2 V	1.4 mm	1.6 mm		2.7 V				e3	30	260		3 mm	NO
APX824-40W5G-7	Diodes Incorporated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA		1	1			GULL WING			1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	3	5.5 V	1.3 mm	1.6 mm	Not Qualified	1.1 V		MANUAL RESET INPUT; RESET THRESHOLD VOLTAGE IS 4V		e3	30	260	+4V	3 mm	NO
APX824-44W5G-7	Diodes Incorporated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA		1	1			GULL WING			1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	3	5.5 V	1.3 mm	1.6 mm	Not Qualified	1.1 V		MANUAL RESET INPUT; RESET THRESHOLD VOLTAGE IS 4.38V		e3	30	260	+4.38V	3 mm	NO
APX824-46W5G-7	Diodes Incorporated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.04 mA		1	1			GULL WING			1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	3	5.5 V	1.3 mm	1.6 mm	Not Qualified	1.1 V		MANUAL RESET INPUT; RESET THRESHOLD VOLTAGE IS 4.63V		e3	30	260	+4.63V	3 mm	NO
BQ34110PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			GULL WING		3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	4.5 V	1.2 mm	4.4 mm		2.7 V				e4	30	260		5 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.