INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Maximum Input Voltage
MP2615GQ	Monolithic Power Systems	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	QCCN	SQUARE	YES	760 kHz	UNSPECIFIED			1	1			NO LEAD		12 V			CHIP CARRIER			.5 mm	85 Cel		-40 Cel	MATTE TIN		QUAD	S-XQCC-N16	1	18 V	1.05 mm	3 mm		4.75 V	12 V	ALSO OPERATES WITH THE BATTERY SUPPLY RANGE OF 2 V TO 8.4 V	4.75 V	e3	40		260		3 mm	YES	18 V
NCP380HSN10AAT1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G5	1	5.5 V	1.1 mm	1.5 mm		2.5 V				e3	NOT SPECIFIED		NOT SPECIFIED		3 mm	NO
S-80832CNUA-B8RT2G	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3		RECTANGULAR	YES		PLASTIC/EPOXY	.0024 mA		1	1	CMOS		FLAT		4.5 V	0.95/10		SMALL OUTLINE, HEAT SINK/SLUG	TO-243	Power Management Circuits	1.5 mm	85 Cel		-40 Cel			DUAL	R-PDSO-F3		10 V	1.6 mm	2.5 mm	Not Qualified	.95 V		DETECTOR THRESHOLD VOLTAGE IS 3.2V			10		260	+3.2V	4.5 mm	NO
S-8254AAVFT-TB-G	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	4			GULL WING		3.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	Tin/Bismuth (Sn/Bi)		DUAL	R-PDSO-G16		24 V	1.1 mm	4.4 mm	Not Qualified	2 V		DETECTION THRESHOLD VOLTAGE IS 4.25V		e6	10		260		5.1 mm	YES
SR2LABU	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			NO LEAD		3 V			SMALL OUTLINE, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel			DUAL	R-PDSO-N6		5.5 V	.6 mm	1.3 mm		1.65 V					NOT SPECIFIED		NOT SPECIFIED		1.6 mm	NO
STBC08PMR	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSON	SQUARE	YES		PLASTIC/EPOXY	.5 mA		1	1			NO LEAD		5 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.12,38	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	S-PDSO-N6	1	6.5 V	1 mm	3 mm	Not Qualified	4.25 V				e3	30		260		3 mm	YES
STM6519ALARUB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSON	RECTANGULAR	YES		PLASTIC/EPOXY	.001 mA		1	1			NO LEAD		3.3 V	2.5/5		SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel			DUAL	R-PDSO-N6		5.5 V	.6 mm	1 mm	Not Qualified	2 V					NOT SPECIFIED		NOT SPECIFIED		1.45 mm	NO
STM6519AUARUB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSON	RECTANGULAR	YES		PLASTIC/EPOXY	.001 mA		1	1			NO LEAD		3.3 V	2.5/5		SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel			DUAL	R-PDSO-N6		5.5 V	.6 mm	1 mm	Not Qualified	2 V					NOT SPECIFIED		NOT SPECIFIED		1.45 mm	NO
TPS2062CDR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.12 mA		1	2			GULL WING		5 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm		4.5 V				e4	NOT SPECIFIED		260		4.9 mm	NO
TPS2330ID	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA	500 A	1	1			GULL WING		4.5 V	3.3/5,3/13		SMALL OUTLINE	SOP14,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G14	1	13 V	1.75 mm	3.9 mm	Not Qualified	3 V		REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2		e4	30		260		8.65 mm	YES
TPS2375PW-1G4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.35 mA		1	1			GULL WING		48 V	48		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	57 V	1.2 mm	3 mm	Not Qualified	0 V				e4	30		260		4.4 mm	NO
TPS3306-25DGK	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	2			GULL WING		3.3 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	6 V	1.1 mm	3 mm	Not Qualified	2.7 V		POWER-ON RESET GENERATOR		e4	30		260	+2.93,2.25V	3 mm	NO
TPS3803G15DCKR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.006 mA		1	1	CMOS		GULL WING		1.5 V	1.5/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Power Management Circuits	.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)		DUAL	R-PDSO-G5	1	6 V	1.1 mm	1.25 mm	Not Qualified	1.3 V		RESET THRESHOLD VOLTAGE IS 1.4V		e4	NOT SPECIFIED		260	+1.4V	2 mm	YES
ADM1266ACPZ-R7	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES		UNSPECIFIED			1	10			NO LEAD		3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.35SQ,20		.5 mm	85 Cel		-40 Cel			QUAD	S-XQCC-N48		3.355 V	.8 mm	9 mm		3.2 V					NOT SPECIFIED		NOT SPECIFIED		9 mm	YES
ADM691AANZ	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY			1	1			THROUGH-HOLE		4.75 V			IN-LINE			2.54 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDIP-T16		5.5 V	5.33 mm	7.62 mm	Not Qualified	0 V		RESET THRESHOLD VOLTAGE IS 4.65V		e3				+4.65V	20.13 mm	NO
ADM706RARZ-REEL7	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.35 mA		1	1			GULL WING		3 V	3/5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V		RESET THRESHOLD VOLTAGE IS 2.63V; MANUAL RESET INPUT		e3	30		260	+2.63V	4.9 mm	NO
AFE3010AIRGTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	105 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	1	26 V	1 mm	3 mm		0 V				e4	30		260		3 mm	YES
APX803S-29SR-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE			.915 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G3		5.5 V	1.1 mm	1.3 mm		1 V		RESET THESHOULD VOLTAGE IS 2.93V		e3			260	+2.93V	2.9 mm	NO
APX803S00-29SA-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE			.915 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G3		5.5 V	1.1 mm	1.3 mm		1 V		RESET THESHOULD VOLTAGE IS 2.93V		e3			260	+2.93V	2.9 mm	NO
APX803S05-31SA-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE			.915 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G3		5.5 V	1.1 mm	1.3 mm		1 V		RESET THESHOULD VOLTAGE IS 3.08V		e3			260	+3.08V	2.9 mm	NO
BQ27426YZFT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	9	VFBGA	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			BALL		3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel		-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)		BOTTOM	R-PBGA-B9	1	4.5 V	.625 mm	1.58 mm		2.45 V				e1	30		260		1.62 mm	NO
BQ294700DSGR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.002 mA						NO LEAD			3/20		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	Power Management Circuits	.5 mm	110 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N8	1	20 V	.8 mm	2 mm	Not Qualified			Battery over-voltage protection(Min/Max)(V) : 3.85 and 4.6		e4	30		260		2 mm
BQ7693002DBTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	30	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G30	2	25 V	1.2 mm	4.4 mm		6 V		DETECTION THRESHOLD VOLTAGE= 0.7V		e4	30		260	+0.7V	7.8 mm	YES
BQ78PL116RGZR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	2			NO LEAD		3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N48	3	4.5 V	1 mm	7 mm	Not Qualified	2.5 V				e4	30		260		7 mm	YES
FFG3105UCX	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			BALL		3.8 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel		-40 Cel	TIN SILVER COPPER		BOTTOM	R-PBGA-B6	1	4.5 V	.625 mm	.96 mm		2.5 V		ALSO HAS 5.5V TO 6V DEVICE PROGRAMMING VOLTAGE		e1	30		260		1.66 mm	YES
LP3910SQX-AP/NOPB	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	2000 kHz	PLASTIC/EPOXY		1 A					NO LEAD		5 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Power Management Circuits	.4 mm	85 Cel	.8 V	-40 Cel	MATTE TIN	3.3 V	QUAD	S-PQCC-N48	1	6 V	.8 mm	6 mm	Not Qualified	2.5 V				e3	30	4	260	+1.9V	6 mm
LTC2974IUP#PBF	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	64	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	4	CMOS		NO LEAD		12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	MATTE TIN		QUAD	S-PQCC-N64		15 V	.8 mm	9 mm		4.5 V		ALSO OPERATES FROM 3.13 TO 3.47 SUPPLY VOLTAGE		e3	30		260		9 mm	YES
LTC4281IUFD#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		NO LEAD		12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	MATTE TIN		QUAD	R-PQCC-N28	1	33 V	.8 mm	4 mm		2.9 V				e3	30		260		5 mm	YES
LTC4361IDC-2#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	1	CMOS		NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	S-PDSO-N8	1	80 V	.8 mm	2 mm	Not Qualified	2.5 V				e3	30		260		2 mm	NO
LTC6810IG-1#3ZZPBF	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	44	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	6	CMOS		GULL WING		20 V			SMALL OUTLINE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G44	1	27.5 V	2 mm	5.3 mm		5 V				e3			260		12.8 mm	YES
MAX1873TEEE	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1		BICMOS		GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel		-40 Cel	TIN LEAD		DUAL	R-PDSO-G16	1		1.73 mm	3.9 mm	Not Qualified		18 V		6 V	e0	20		240		4.89 mm		28 V
MAX1873TEEE+	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1	4	BICMOS		GULL WING	PULSE WIDTH MODULATION	18 V		SINGLE	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.9 mm	Not Qualified	6 V	18 V		6 V	e3	30		260		4.89 mm	YES	28 V
MAX5932ESA-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BICMOS		GULL WING		24 V	24		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1	80 V	1.75 mm	3.9 mm	Not Qualified	9 V				e0			245		4.9 mm	YES
MAX5932ESA+T	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BICMOS		GULL WING		24 V	24		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G8	1	80 V	1.75 mm	3.9 mm	Not Qualified	9 V				e3	30		260		4.9 mm	YES
MAX706RESA-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.5 mA		1	1	CMOS		GULL WING		3 V	3.3/5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD		DUAL	R-PDSO-G8		5.5 V	1.75 mm	3.9 mm	Not Qualified	1.2 V		WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR		e0				+2.63V	4.9 mm	NO
MAX706RESA+T	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.5 mA		1	1	CMOS		GULL WING		3 V	3.3/5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1.2 V		WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR		e3	30		260	+2.63V	4.9 mm	NO
MC34064P5	Motorola	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TO-226	ROUND	NO		UNSPECIFIED	.5 mA		1	1			THROUGH-HOLE		4 V			CYLINDRICAL	SIP3,.1,50			85 Cel		-40 Cel	Tin/Lead (Sn/Pb)		BOTTOM	O-XBCY-T3		6.5 V			Not Qualified	1 V				e0				+4.6V		NO
MCP120T-270I/TT	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.06 mA		1	1	CMOS		GULL WING		5 V	1/5.5		SMALL OUTLINE, THIN PROFILE	TO-236	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1 V				e3	40		260	+2.63V	2.92 mm	NO
MCP73831-5ACI/MC	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1		TS 16949	NO LEAD		5.5 V	3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-N8	1	6 V	1 mm	2 mm	Not Qualified	3.75 V				e3	40		260	+4.50V	3 mm	YES
MCP73838-NVI/MF	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1		TS 16949	NO LEAD		5.35 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	1 mm	3 mm	Not Qualified	4.65 V				e3			260	+4.35V	3 mm	YES
MIC2774N-29YM5	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	2			GULL WING		3.3 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	3.63 V	1.45 mm	1.6 mm	Not Qualified	2.97 V		NOMINAL THRESHOLDVOLTAGE IS 2.93; MANUAL RESET INPUT		e4			260	+2.93V	2.9 mm	YES
MIC2774N-29YM5-TX	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	2			GULL WING		3.3 V			SMALL OUTLINE, LOW PROFILE	TSOP5/6,.11,37		.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5		5.5 V	1.45 mm	1.6 mm		1.5 V		NOMINAL THRESHOLDVOLTAGE IS 2.93; MANUAL RESET INPUT		e4				+2.93V	2.9 mm	YES
NCP305LSQ20T1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0033 mA		1	1	CMOS		GULL WING			0.8/10		SMALL OUTLINE, THIN PROFILE	TSOP4,.08	Power Management Circuits	1.3 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G4	1	10 V	1.1 mm	1.25 mm	Not Qualified	.8 V		DETECTION THRESHOLD VOLTAGE IS 2V		e3	30		260	+2V	2 mm	NO
R3111N301C-TR-FE	Nisshinbo Micro Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING		12 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	10 V	1.2 mm	1.6 mm	Not Qualified	.7 V		DETECTOR THRESHOLD VOLTAGE IS 3V		e3	10		260	+3V	2.9 mm	YES
R3119N120E-TR-FE	Ricoh Electronic Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING		2.2 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	105 Cel		-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	6 V	1.3 mm	1.6 mm	Not Qualified	2.1 V		DETECTOR THRESHOLD VOLTAGE IS 12V		e3	10		260	+12V	2.9 mm	NO
S-80823CNUA-B8IT2G	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3		RECTANGULAR	YES		PLASTIC/EPOXY	.0024 mA		1	1	CMOS		FLAT		3.5 V	0.95/10		SMALL OUTLINE, HEAT SINK/SLUG	TO-243	Power Management Circuits	1.5 mm	85 Cel		-40 Cel			DUAL	R-PDSO-F3		10 V	1.6 mm	2.5 mm	Not Qualified	.95 V		DETECTOR THRESHOLD VOLTAGE IS 2.3V			NOT SPECIFIED		NOT SPECIFIED	+2.3V	4.5 mm	NO
S-8239AAJ-M6T1U	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		3.5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SOP6,.1,37		.95 mm	85 Cel		-40 Cel	TIN		DUAL	R-PDSO-G6		8 V	1.35 mm	1.6 mm		1.5 V				e3					2.9 mm	NO
S-8240AEG-I6T1U	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSOF	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			FLAT		1.8 V			SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	TIN		DUAL	R-PDSO-F6		6 V	.5 mm	1.57 mm		1.5 V				e3					1.6 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.