INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Nominal Output Voltage	Maximum Input Voltage
STM6600DQ25DM6F	STMicroelectronics	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	12	VSON	RECTANGULAR	YES		PLASTIC/EPOXY	.008 mA		1	1			NO LEAD		2 V	1.8/5		SMALL OUTLINE, VERY THIN PROFILE	SOLCC12,.08,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-N12	1	5.5 V	.8 mm	2 mm	Not Qualified	1.6 V		RESET THRESHOLD VOLTAGE IS 3.3V		e4	30		260	+3.3V	3 mm	NO
STM6777TWWB6F	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.035 mA		1	1			GULL WING		3.3 V	0.8/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	.8 V		RESET THRESHOLD VOLTAGES ARE 3.075V AND 1.665V; MANUAL RESET INPUT		e3			260	+3.075,1.665V	2.9 mm	YES
TL7700CP	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	DIP	RECTANGULAR	YES		PLASTIC/EPOXY	3 mA		1	1	BIPOLAR		THROUGH-HOLE		3 V	2/36		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	DIP8,.3	Power Management Circuits	2.54 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T8		40 V	5.08 mm	7.62 mm	Not Qualified	1.8 V		POWER ON RESET GENERATOR		e4				+0.5V	9.59 mm	YES
TLC7705IPWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	BICMOS		GULL WING		2.7 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	6 V	1.2 mm	3 mm	Not Qualified	2 V		POWER-ON RESET GENERATOR		e4	NOT SPECIFIED		260	+4.55V	4.4 mm	NO
TPS2113PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	2			GULL WING		2.8 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.2 mm	3 mm	Not Qualified	1.5 V		CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS		e4	30		260		4.4 mm	YES
TPS2331ID	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA	500 A	1	1			GULL WING		4.5 V	3.3/5,3/13		SMALL OUTLINE	SOP14,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G14	1	13 V	1.75 mm	3.9 mm	Not Qualified	3 V		REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2		e4	30		260		8.65 mm	YES
TPS3307-33D	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	3	CMOS		GULL WING		3.3 V	2/6		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 4.55V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR		e4	30		260	+1.25,2.93,4.55V	4.9 mm	YES
TPS3705-33DG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.05 mA		1	1	CMOS		GULL WING		3.3 V	2/6		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 2.93V; POWER ON RESET GENERATOR; MANUAL RESET INPUT		e4	NOT SPECIFIED		260	+2.93V	4.9 mm	NO
TPS3801I50DCKRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1	CMOS		GULL WING		3.3 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	6 V	1.1 mm	1.25 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 4.55 V; POWER ON RESET GENERATOR; MANUAL RESET INPUT		e4	NOT SPECIFIED		260	+4.55V	2 mm	NO
TPS3823A-33DBVT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1			GULL WING			1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V		THRESHOLD VOLTAGE 2.93V		e4	NOT SPECIFIED		260	+2.93V	2.9 mm	NO
TPS650002TRTERQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	2410 kHz	PLASTIC/EPOXY		.6 A	1	3			NO LEAD		3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel	1.2 V		-40 Cel	NICKEL PALLADIUM GOLD	2.8 V	QUAD	S-PQCC-N16	2	6 V	.8 mm	3 mm		2.3 V				e4	30	3	260		3 mm	YES
TPS65185RSLR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY			1	1			NO LEAD		3.7 V	3.7		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Power Management Circuits	.4 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N48	3	5.9 V	1 mm	6 mm	Not Qualified	3 V				e4	30	4	260	+2.9V	6 mm	YES
ADL5501AKSZ-R2	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BIPOLAR		GULL WING		3 V	3/5		SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Other Analog ICs	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	5.5 V	1 mm	1.25 mm	Not Qualified	2.7 V				e4			260		2 mm	NO
ADM6316CW25ARJZ-R7	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.02 mA		1	1	CMOS		GULL WING		3.3 V	1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 2.5V		e3	30		260	+2.5V	2.9 mm	NO
APX803S00-26SA-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE			.915 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3		5.5 V	1.1 mm	1.3 mm		1 V		RESET THESHOULD VOLTAGE IS 2.67V		e3			260	+2.67V	2.9 mm	NO
APX803S00-31SA-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE			.915 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3		5.5 V	1.1 mm	1.3 mm		1 V		RESET THESHOULD VOLTAGE IS 3.08V		e3			260	+3.08V	2.9 mm	NO
APX803S00-44SA-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE			.915 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3		5.5 V	1.1 mm	1.3 mm		1 V		RESET THESHOULD VOLTAGE IS 4.38V		e3			260	+4.38V	2.9 mm	NO
APX803S05-23SA-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING					SMALL OUTLINE			.915 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3		5.5 V	1.1 mm	1.3 mm		1 V		RESET THESHOULD VOLTAGE IS 2.25V		e3			260	+2.25V	2.9 mm	NO
BQ24103ARHLT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HQCCN	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY	5 mA	4.5 A	1	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N20	2	16 V	1 mm	3.5 mm	Not Qualified	4.35 V			4.35 V	e4	30		260		4.5 mm	NO	4.2 V	16 V
BQ25883RGET	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		5 V		BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N24	1	6.2 V	1 mm	4 mm		3.9 V				e4	30		260		4 mm	YES
BQ27541DRZT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	12	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			NO LEAD		3.6 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-N12	2	5.5 V	1 mm	2.5 mm	Not Qualified	2.7 V				e4	30		260		4 mm	NO
BQ294712DSGT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.002 mA		1	4			NO LEAD		14.4 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20		.5 mm	110 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N8	2	20 V	.8 mm	2 mm		3 V		Battery over-voltage protection(Min/Max)(V) : 3.85 and 4.6		e4	30		260	+4.125V	2 mm	NO
BQ296216DSGT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.008 mA		1	4			NO LEAD		14.4 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	110 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N8	1	20 V	.8 mm	2 mm		3 V		OVER VOLTAGE AND UNDER VOLTAGE THRESHOLD ARE 4.55 AND 2.5V		e4	NOT SPECIFIED		260	+4.55V	2 mm	NO
BQ7791500PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.08 mA		1	6			GULL WING		20 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G24	2	25 V	1.2 mm	4.4 mm		3 V		Battery over-voltage protection(Min/Max)(V) : 3 and 4.575		e4	30		260		7.8 mm	YES
BQ7791506PW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.08 mA		1	6			GULL WING		20 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G24	2	25 V	1.2 mm	4.4 mm		3 V		Battery over-voltage protection(Min/Max)(V) : 3 and 4.575		e4	30		260		7.8 mm	YES
ISL88011IH531Z-T7A	Renesas Electronics	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0115 mA		1	1			GULL WING		2.5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm		2 V				e3	30		260	+3.09V	2.9 mm	NO
ISL9301IRZ	Renesas Electronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	2			NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	3	10 V	.9 mm	3 mm		4.3 V		RECHARGE VOLTAGE THRESHOLD IS -150 MV;MAXIMUM SUPPLY VOLATGE RANGE IS 28V		e3	30		260		3 mm	YES
ISL94212INZ	Renesas Electronics	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	64	TFQFP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING		39.6 V			FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-PQFP-G64	3	60 V	1.2 mm	10 mm		6 V				e3	30		260		10 mm	YES
LT1511ISW#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	24	SOP	RECTANGULAR	YES	230 kHz	PLASTIC/EPOXY	7 mA	4 A	1	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION	16 V		SINGLE	SMALL OUTLINE	SOP24,.4		1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G24	1	28 V	2.642 mm	7.493 mm	Not Qualified		16 V		11 V	e3	30		260	+7V	15.395 mm	YES	2.465 V	28 V
LTC2937IUHE#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	RECTANGULAR	YES		PLASTIC/EPOXY			1	6	CMOS		NO LEAD		12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	R-PQCC-N28	1	16.5 V	.8 mm	5 mm		4.5 V		THRESHOLD VOLTAGE= 1.2V		e3	30		260	+1.2V	6 mm	YES
LTC2954IDDB-1#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		NO LEAD					SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N8	1	26.4 V	.8 mm	2 mm	Not Qualified	2.7 V				e3	30		260		3 mm	YES
LTC2992IDE-1#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.6 mA		2	4	CMOS		NO LEAD		48 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC16,.12,18		.45 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N16	1	100 V	.8 mm	3 mm		3 V		SEATED HT-CALCULATED		e3	30		260		4 mm	NO
LTC2992IDE-1#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.6 mA		2	4	CMOS		NO LEAD		48 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC16,.12,18		.45 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N16	1	100 V	.8 mm	3 mm		3 V		SEATED HT-CALCULATED		e3	30		260		4 mm	NO
LTC4236IUFD-1#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	4 mA		1	1	CMOS		NO LEAD		12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20		.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	R-PQCC-N28	1	18 V	.8 mm	4 mm		2.9 V				e3			260		5 mm	YES
LTC4368IMS-1#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.1 mA				CMOS		GULL WING		12 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-G10		60 V	1.1 mm	3 mm		2.5 V				e3					3 mm
LTC4421IUHE#TRPBF	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	36	HVQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA		1	2	CMOS		NO LEAD		12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.2X.24,20		.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	R-PQCC-N36		36 V	.8 mm	5 mm		3 V				e3				+2.3V	6 mm
LTM9100IY#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	42	BGA	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			BALL		5 V			GRID ARRAY			1.27 mm	85 Cel			-40 Cel			BOTTOM	R-PBGA-B42		5.5 V	5.41 mm	9 mm		4.5 V					NOT SPECIFIED		NOT SPECIFIED		22 mm	YES
MAX17055EWL+T	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	9	VFBGA	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			BALL					GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel			-40 Cel	TIN SILVER COPPER NICKEL		BOTTOM	R-PBGA-B9	1	4.9 V	.69 mm	1.407 mm		2.3 V				e2	30		260		1.498 mm	NO
MAX6330LUR-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		.05 A	1	1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Voltage References	.95 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G3	1		1.12 mm	1.3 mm	Not Qualified					e0	20		240		2.92 mm	NO	5 V
MAX6330LUR+T	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		.05 A	1	1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Voltage References	.95 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G3	1		1.12 mm	1.3 mm	Not Qualified					e3	30		260		2.92 mm	NO	5 V
MAX705ESA/GH9-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm		1.2 V				e0					4.9 mm	NO
MAX812TEUS-T	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	TSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.015 mA		1	1	CMOS		GULL WING		3.3 V	3.3		SMALL OUTLINE, THIN PROFILE	TO-253LOW	Power Management Circuits	1.9 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G4		5.5 V	1.14 mm	1.3 mm	Not Qualified	1.2 V				e0				+3.08V	2.92 mm	NO
MAX812TEUS+T	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	LSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.01 mA		1	1			GULL WING		3.3 V	3.3		SMALL OUTLINE, LOW PROFILE	TO-253	Power Management Circuits	1.92 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G4	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1.2 V		RESET THRESHOLD VOLTAGE IS 3.08V		e3	30		260	+3.08V	2.92 mm	NO
MAX8724ETI	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	VQCCN	SQUARE	YES		UNSPECIFIED	6 mA		1	1	BICMOS		NO LEAD		18 V	18		CHIP CARRIER, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	TIN LEAD		QUAD	S-XQCC-N28	1	28 V	.8 mm	5 mm	Not Qualified	8 V				e0					5 mm	YES
MAX8724ETI+	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED	6 mA		1	1	BICMOS		NO LEAD		18 V	18		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		QUAD	S-XQCC-N28	1	28 V	.8 mm	5 mm	Not Qualified	8 V				e3	30		260		5 mm	YES
MAX8903JETI+T	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED	4 mA		1	1	BICMOS		NO LEAD		5 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16SQ,16	Power Management Circuits	.4 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		QUAD	S-XQCC-N28	1	16 V	.8 mm	4 mm	Not Qualified	4.15 V				e3	30		260		4 mm	NO
MCP101T-315I/TT	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.06 mA		1	1	CMOS		GULL WING		3 V	1/5.5		SMALL OUTLINE, THIN PROFILE	TO-236	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	1 V				e3	40		260	+3.08V	2.92 mm	NO
MCP73832T-5ACI/OT	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1		TS 16949	GULL WING		5.5 V	3.3/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.65 mm	Not Qualified	3.75 V				e3			260	+4.50V	2.95 mm	YES

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.