Texas Instruments Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Maximum On-state Resistance (Ron)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold
TPS22916CNLYFPR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		4	VFBGA	SQUARE	YES		PLASTIC/EPOXY			1	1				BALL		1.2 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA4,2X2,16		.4 mm	85 Cel		-40 Cel	TIN SILVER COPPER		BOTTOM	S-PBGA-B4	1	5.5 V	.5 mm	.78 mm		1 V	HEAT SINK AVAILABLE	e1			260			.78 mm	NO
TPS2553DRV-1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	1				NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel		-40 Cel			DUAL	S-PDSO-N6		6.5 V	.8 mm	2 mm	Not Qualified	2.5 V								2 mm	YES
TPS3847085DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1				GULL WING					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	105 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	2	18 V	1.45 mm	1.6 mm		4.5 V		e4	NOT SPECIFIED		260			2.9 mm	NO
TPS6521815RSLR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	2400 kHz	PLASTIC/EPOXY		1.8 A	1	7				NO LEAD		3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	105 Cel		-40 Cel	NICKEL PALLADIUM GOLD	3.4 V	QUAD	S-PQCC-N48	3	5.5 V	1 mm	6 mm		2.7 V		e4	30	7	260			6 mm	YES
TPS65510RGTT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	750 kHz	PLASTIC/EPOXY	.35 mA	1.2 A	1	1				NO LEAD		3.6 V	3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel	1.2 V	-40 Cel	NICKEL PALLADIUM GOLD	12.5 V	QUAD	S-PQCC-N16	2	5.5 V	1 mm	3 mm	Not Qualified	2.65 V		e4	30	5	260		+2.5V	3 mm	NO
UC2906NG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY			1	1				THROUGH-HOLE		10 V			IN-LINE			2.54 mm	70 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T16		40 V	5.08 mm	7.62 mm	Not Qualified	5 V		e4						19.305 mm	NO
UCC2946DTRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.018 mA		1	1				GULL WING			2.5/5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	2	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.1 V	RESET THRESHOLD VOLTAGE IS 1.235V	e4	NOT SPECIFIED		260		+1.235V	4.9 mm	YES
BQ27500DRZR-V130	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	12	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1				NO LEAD		2.5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-N12	2	2.6 V	1 mm	2.5 mm	Not Qualified	2.4 V		e4	NOT SPECIFIED		260			4 mm	YES
BQ29701DSER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSON	SQUARE	YES		PLASTIC/EPOXY			1	1				NO LEAD		3.6 V			SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N6	1	8 V	.8 mm	1.5 mm		1.5 V	Battery over-voltage protection(Min/Max)(V) : 3.85 and 4.6	e4	30		260			1.5 mm	NO
TPS16413DRCR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		10	HVSON	SQUARE	YES		PLASTIC/EPOXY		1.8 A	1	1				NO LEAD		24 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20		.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N10	2	60 V	1 mm	3 mm		2.7 V		e4			260		+1.53V	3 mm	NO
TPS2384PAPR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	64	HTFQFP	SQUARE	YES		PLASTIC/EPOXY	14 mA		1	4				GULL WING		48 V	48		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	QFP64,.47SQ,20	Power Management Circuits	.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G64	3	57 V	1.2 mm	10 mm	Not Qualified	44 V		e4	30		260			10 mm	NO
TPS3824-33DBVRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1	CMOS			GULL WING		3.3 V	2.5/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 2.93V	e4	NOT SPECIFIED		260		+2.93V	2.9 mm	NO
TPS659122YFFR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	81	VFBGA	RECTANGULAR	YES	2800 kHz	UNSPECIFIED	.055 mA	2.5 A	1	1				BALL					GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	.5 V	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	3.8 V	BOTTOM	R-XBGA-B81	1	5.5 V	.625 mm	3.598 mm		2.7 V		e1	NOT SPECIFIED	14	NOT SPECIFIED		+2.5V	3.654 mm	NO
UCD3138RGCT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE		HVQCCN	SQUARE	YES		PLASTIC/EPOXY	100 mA							NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N64	2		.88 mm	9 mm				e4	30	8	260			9 mm
BQ24392QRSERQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	VQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	.115 mA		1	1		AEC-Q100	1000 kHz	NO LEAD		5 V			CHIP CARRIER, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER		QUAD	R-PQCC-N10	3	5.25 V	.6 mm	1.5 mm		4.75 V		e4	30		260	8 ohm	+3.5V	2 mm	NO
BQ25895MRTWT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	2				NO LEAD				BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N24	2	14 V	.8 mm	4 mm		3.9 V	ADJUSTABLE OUTPUT VOLTAGE RANGE FROM 4.5 VOLT TO 5.5 VOLT	e4	30		260			4 mm	YES
BQ76925PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	20	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	70 mA		1	1				GULL WING		21.6 V	4.2/26.4		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP20,.25,25	Power Management Circuits	.65 mm	85 Cel		-25 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2	26.4 V	1.2 mm	4.4 mm	Not Qualified	4.2 V		e4	30		260			6.5 mm	YES
TL7705BCDR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BIPOLAR			GULL WING		5 V	3.6/18		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	70 Cel		0 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	2	18 V	1.75 mm	3.9 mm	Not Qualified	3.6 V	POWER-ON RESET GENERATOR	e4	30		260		4.55	4.9 mm	YES
TPS2112APWRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	2				GULL WING		2.8 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.2 mm	3 mm	Not Qualified	1.5 V	CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS	e4	30		260			4.4 mm	YES
TPS2113PW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	2				GULL WING		2.8 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.2 mm	3 mm	Not Qualified	1.5 V	CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS	e4	30		260			4.4 mm	YES
TPS2393APWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA	500 A	1	1				GULL WING	-48 V		-48		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G14	1	-20 V	1.2 mm	4.4 mm	Not Qualified	-80 V	-20 V TO -80 V WIDE INPUT SUPPLY RANGE	e4	30		260		+1.35V	5 mm	YES
TPS3306-18DGKRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	2				GULL WING		3.3 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	6 V	1.1 mm	3 mm	Not Qualified	2.7 V	POWER-ON RESET GENERATOR	e4	30		260		+2.93,1.68V	3 mm	NO
TPS3707-33DGN	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.05 mA		1	1	CMOS			GULL WING		3.3 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.63V; POWER ON RESET GENERATOR; MANUAL RESET INPUT	e4	NOT SPECIFIED		260		+2.93V	3 mm	NO
UCD90160RGCR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	AUTOMOTIVE	64	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1				NO LEAD		3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N64	3	3.6 V	1 mm	9 mm	Not Qualified	3 V		e4	30		260			9 mm	YES
BQ25302RTER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1				NO LEAD		5 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	1	6.2 V	.8 mm	3 mm		4 V		e4	30		260		+6.4V	3 mm	YES
BQ27510DRZT-G2	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	12	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1				NO LEAD		3.6 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-N12	2	5.5 V	1 mm	2.5 mm	Not Qualified	2.7 V		e4	30		260			4 mm	YES
TPS2066DR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	1				GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V	UNDERVOLTAGE LOCKOUT	e4	NOT SPECIFIED		260			4.9 mm	NO
TPS25944LRVCR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES		UNSPECIFIED	.3 mA	5.2 A	1	1				NO LEAD		3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	R-XQCC-N20	2	18 V	.8 mm	3 mm		2.7 V		e4	NOT SPECIFIED		260		+2.2V	4 mm	YES
TPS25972ARPWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		10	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		8 A	1	1				NO LEAD		12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC10(UNSPEC)			125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N10	2	23 V	1 mm	2 mm		2.7 V		e4			260		2.54	2 mm	YES
UC2906N	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	DIP	RECTANGULAR	NO		PLASTIC/EPOXY			1	1				THROUGH-HOLE		10 V			IN-LINE			2.54 mm	70 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T16		40 V	5.08 mm	7.62 mm	Not Qualified	5 V		e4						19.305 mm	NO
UCC29002DRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BICMOS			GULL WING		12 V	12		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	105 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified			e4	30		260			4.9 mm	YES
PTPS25972ARPWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		10	BCC	SQUARE	YES		PLASTIC/EPOXY		8 A	1	1				NO LEAD		12 V			CHIP CARRIER				125 Cel		-40 Cel			BOTTOM	S-PBCC-N10		23 V	1 mm	2 mm		2.7 V							2.54	2 mm	YES
TL7700CDGKR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	1 mA		1	1	BIPOLAR			GULL WING		3 V	2/36		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP8,.19,25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	40 V	1.1 mm	3 mm	Not Qualified	1.8 V		e4	30		260		+0.5V	3 mm	YES
TPS2041BDGNG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.07 mA		1	1				GULL WING		3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)		DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.7 V	UNDERVOLTAGE LOCKOUT	e4	NOT SPECIFIED		260			3 mm	NO
TPS22992SRXNR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		8	VQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1				NO LEAD		1.5 V			CHIP CARRIER, VERY THIN PROFILE	LCC8,.05SQ,16		.4 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N8	2	5.5 V	.8 mm	1.25 mm		1 V		e4			260		0.45	1.25 mm	NO
TPS2372-3RGWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1				NO LEAD		10.1 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N20	2	57 V	1 mm	5 mm		8 V		e4	30		260			5 mm	NO
TPS24701DGKR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	1.4 mA	500 A	1	1				GULL WING		12 V	12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-G8	1	18 V	1.1 mm	3 mm	Not Qualified	2.5 V		e4	30		260			3 mm	YES
TPS3305-18DGNR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	2	CMOS			GULL WING		3.3 V	3/5		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2.7 V	RESET THRESHOLD IS 2.93V, POWER ON RESET GENERATOR	e4	30		260		+1.68V	3 mm	NO
TPS3809L30DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1				GULL WING		3 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G3	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.64V	e4	NOT SPECIFIED		260		+2.64V	2.9 mm	NO
TPS3897ADRYR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	VSON	RECTANGULAR	YES		PLASTIC/EPOXY	.012 mA		1	1				NO LEAD		3.3 V			SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20		.5 mm	125 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-N6	1	6.5 V	.6 mm	1 mm	Not Qualified	1.7 V		e4	30		260		+0.5V	1.45 mm	YES
UC2903DW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	18	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	15 mA		1	4	BIPOLAR			GULL WING		15 V			SMALL OUTLINE	SOP18,.4	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G18	2	40 V	2.65 mm	7.5 mm	Not Qualified	8 V		e4	30		260		1.8	11.55 mm	YES
BQ24072TRGTT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1				NO LEAD		5 V	4.5/6.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N16	2	6.4 V	1 mm	3 mm	Not Qualified	4.35 V	DETECTION THRESHOLD VOLTAGE IS 0.08V; I/P ACCEPTS UP TO 26V WITHOUT DAMAGE, BUT OPERATN IS SUSPENDED	e4	NOT SPECIFIED		260		+6.6V	3 mm	YES
BQ294502DRVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY	.002 mA		1	1				NO LEAD		10.8 V	3/15		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N6	1	25 V	.8 mm	2 mm	Not Qualified	3 V	Battery over-voltage protection(Min/Max)(V) : 4.35 and 4.35	e4	NOT SPECIFIED		260			2 mm	NO
LM3525M-H	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1				GULL WING		5 V			SMALL OUTLINE			1.27 mm	125 Cel		-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1	5.5 V	1.7526 mm	3.91 mm	Not Qualified	2.7 V		e0	20		235			4.9 mm	NO
LM3658SD-B/NOPB	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	1000 mA		1	1				NO LEAD		5 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	.8 mm	3 mm	Not Qualified	4.5 V	RESTART THRESHOLD VOLTAGE IS 4 VOLT	e3	30		260		+4V	3 mm	YES
LM5060Q1MMX	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1				GULL WING		14 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	125 Cel		-40 Cel	TIN LEAD		DUAL	S-PDSO-G10		65 V	1.09 mm	3 mm		5.5 V		e0						3 mm	YES
TPS2124YFPR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	VFBGA	RECTANGULAR	YES		PLASTIC/EPOXY	.4 mA		1	1				BALL					GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA20,4X5,16		.4 mm	125 Cel		-40 Cel	TIN SILVER COPPER		BOTTOM	R-PBGA-B20	1	22 V	.5 mm	1.518 mm		2.8 V		e1	30		260			1.918 mm	YES
TPS3808G12DBVTG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0057 mA		1	1				GULL WING		3.3 V	1.8/6.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	125 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G6	1	6.5 V	1.45 mm	1.6 mm	Not Qualified	1.7 V	DETECTOR THRESHOLD VOLTAGE IS 1.12V	e4	NOT SPECIFIED		260		+1.12V	2.9 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.