Texas Instruments Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Control Mode	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Maximum Input Voltage
TPS3836K33DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING		1.8 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5		1	6 V	1.45 mm	1.6 mm	Not Qualified	1.6 V	RESET THRESHOLD VOLTAGE IS 2.93V		e4		NOT SPECIFIED		260		2.9 mm	NO
BQ34110PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		2	4.5 V	1.2 mm	4.4 mm		2.7 V			e4		30		260		5 mm	NO
TPS259461LRPWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		10	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		6 A	1	1			NO LEAD		12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC10(UNSPEC)			125 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N10		2	23 V	1 mm	2 mm		2.7 V			e4				260	+1.2V	2 mm	YES
TPS259540DSGT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.25 mA	4 A	1	1			NO LEAD		12 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8		1	18 V	.8 mm	2 mm		2.7 V			e4		30		260	+2.54V	2 mm	YES
BQ2057WTSG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	4 mA		1	1	CMOS		GULL WING		5 V	4.5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	70 Cel		-20 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		2	15 V	1.2 mm	3 mm	Not Qualified	4.5 V			e4		30		260		4.4 mm	YES
BQ24123RHLR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HQCCN	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1			NO LEAD				BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N20		2	16 V	1 mm	3.5 mm	Not Qualified	4.35 V			e4		30		260	+3.3V	4.5 mm	NO
BQ24780SRUYR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	QCCN	SQUARE	YES		UNSPECIFIED			1	1			NO LEAD				BUCK	CHIP CARRIER			.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N28		1	24 V	.8 mm	4 mm		4.5 V			e4		30		260		4 mm	YES
BQ25505RGRR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY			1	1			NO LEAD	PULSE FREQUENCY MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20		1	5.1 V	1 mm	3.5 mm		.6 V		.1 V	e4		30		260		3.5 mm	YES	5.1 V
BQ27500DRZT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	12	VSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			NO LEAD		2.5 V			SMALL OUTLINE, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N12		2	2.6 V	1 mm	2.5 mm	Not Qualified	2.4 V			e4		30		260		4 mm	YES
BQ27541DRZT-V200	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	12	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			NO LEAD		3.6 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-N12		2	5.5 V	1 mm	2.5 mm	Not Qualified	2.7 V			e4		NOT SPECIFIED		260		4 mm	YES
BQ51051BYFPT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	28	VFBGA	RECTANGULAR	YES		UNSPECIFIED	10 mA						BALL			4/10		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA28,4X7,16	Power Management Circuits	.4 mm	125 Cel		0 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B28		1		.5 mm		Not Qualified				e1		30		260	+15V
BQ79652PAPRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		64	HTFQFP	SQUARE	YES		PLASTIC/EPOXY			1	12		AEC-Q100	GULL WING					FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ		.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64		3	80 V	1.2 mm	10 mm					e4				260		10 mm	NO
TLC7733QPWRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	CMOS		GULL WING		5 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	125 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8		1	6 V	1.2 mm	3 mm	Not Qualified	2 V	POWER-ON RESET GENERATOR		e4		NOT SPECIFIED		260	+2.93V	4.4 mm	NO
TPS2052ADRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			2				GULL WING					SMALL OUTLINE			1.27 mm				NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1		1.75 mm	3.9 mm	Not Qualified				e4		30		260		4.9 mm
TPS2062CDRBT-2	Texas Instruments	SGL POLE SGL THROW SWITCH	INDUSTRIAL		HVSON	SQUARE	YES		PLASTIC/EPOXY	.001 mA						NO LEAD					SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	SEPARATE OUTPUT	1	5.5 V	1 mm	3 mm		4.5 V		0 V	e4	MAKE-BEFORE-BREAK	30		260		3 mm		5.5 V
TPS2216ADAP	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	32	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	3			GULL WING		3.3 V	3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP32,.3	Power Management Circuits	.65 mm	70 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G32		3	5.25 V	1.2 mm	6.1 mm	Not Qualified	2.7 V	ALSO REQUIRES 5V AND 12V SUPPLY		e4		30		260		11 mm	NO
TPS2421-1DDAR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	8	HLSOP	RECTANGULAR	YES		PLASTIC/EPOXY		5.5 A	1	1			GULL WING		3.3 V	3/20		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	Power Management Circuits	1.27 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8		1	20 V	1.68 mm	3.9 mm	Not Qualified	3 V			e4		30		260		4.89 mm	YES
TPS25942ARVCT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	20	HVQCCN	RECTANGULAR	YES		UNSPECIFIED	.3 mA	5.2 A	1	1			NO LEAD		3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-XQCC-N20		2	18 V	.8 mm	3 mm		2.7 V			e4		NOT SPECIFIED		260	+2.2V	4 mm	YES
TPS3620-33MDGKREP	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	MILITARY	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	1			GULL WING		3.3 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	125 Cel		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8		1	5.5 V	1.1 mm	3 mm	Not Qualified	1.65 V	MANUAL RESET; POWER ON RESET GENERATOR; VOLTAGE MONITOR FOR POWER-FAIL OR LOW-BATTERY MONITORING		e4		30		260	2.93	3 mm	NO
TPS3707-33DGNRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.05 mA		1	1	CMOS		GULL WING		3.3 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8		1	6 V	1.07 mm	3 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.93V; POWER ON RESET GENERATOR; MANUAL RESET INPUT		e4		NOT SPECIFIED		260	+2.93V	3 mm	NO
TPS3803-01QDCKRQ1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	10 mA		1	1	CMOS		GULL WING		1.5 V	1.5/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.08,25	Power Management Circuits	.65 mm	125 Cel		-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	R-PDSO-G5		1	6 V	1.1 mm	1.25 mm	Not Qualified	1.3 V	RESET THRESHOLD VOLTAGE IS 1.226V		e4		NOT SPECIFIED		260	+1.2V	2 mm	YES
TPS3813J25DBVRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1			GULL WING		2.5 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6		1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V	DETECTION THRESHOLD VOLTAGE IS 2.25V; POWER ON RESET GENERATOR		e4		NOT SPECIFIED		260	+2.25V	2.9 mm	NO
TPS6521845RSLT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	2400 kHz	PLASTIC/EPOXY		1.8 A	1	8			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16		.4 mm	105 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48		3	5.5 V	1 mm	6 mm		2.2 V			e4		30	7	260		6 mm	YES
TPS65218B101PHPT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HTFQFP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING		2.4 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH			.5 mm	105 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48		3	3.3 V	1.2 mm	7 mm		2.2 V			e4		30		260		7 mm	YES
BQ2057DGK	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	4 mA		1	1	CMOS		GULL WING		5 V	4.5/15		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	70 Cel		-20 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	S-PDSO-G8		2	15 V	1.1 mm	3 mm	Not Qualified	4.5 V			e4		30		260		3 mm	YES
BQ24232HARGTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD		5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	125 Cel		-5 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16		2	10.2 V	1 mm	3 mm		4.35 V	RECHARGE DETECTION IS 4.21V		e4		30		260	+3.3V	3 mm	YES
BQ24616RGER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	5 mA		1	1			NO LEAD				BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N24		2	28 V	1 mm	4 mm	Not Qualified	5 V			e4		NOT SPECIFIED		260	+3.85V	4 mm	YES
BQ29704DSER	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSON	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		3.6 V			SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N6		1	8 V	.8 mm	1.5 mm		1.5 V	Battery over-voltage protection(Min/Max)(V) : 3.85 and 4.6		e4		30		260		1.5 mm	NO
LM10504TME/NOPB	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	OTHER	34	VFBGA	SQUARE	YES	2300 kHz	PLASTIC/EPOXY	.2 mA	1.6 A	1	1			BALL		5 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA34,7X7,16	Switching Regulator or Controllers	.4 mm	85 Cel	VOLTAGE-MODE	-30 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B34		1	5.5 V	.675 mm	2.81 mm	Not Qualified	3 V			e1		30		260		2.81 mm	YES
TLC7701ID	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	BICMOS		GULL WING		2.7 V	2/6		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8		1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V	POWER-ON RESET GENERATOR		e4		NOT SPECIFIED		260	+1.1V	4.9 mm	NO
TPS2066DRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	1			GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8		1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V	UNDERVOLTAGE LOCKOUT		e4		NOT SPECIFIED		260		4.9 mm	NO
TPS2114APW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.09 mA		1	2			GULL WING		2.8 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1	5.5 V	1.2 mm	3 mm	Not Qualified	1.5 V	CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS		e4		30		260		4.4 mm	YES
TPS259250DRCR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY		5 A	1	1			NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N10		2	5.5 V	1 mm	3 mm		4.5 V			e4		30		260		3 mm	YES
TPS3305-18DGNRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	2	CMOS		GULL WING		3.3 V	3/5		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8		1	6 V	1.07 mm	3 mm	Not Qualified	2.7 V	RESET THRESHOLD IS 2.93V, POWER ON RESET GENERATOR		e4		30		260	+1.68V	3 mm	NO
TPS3710DDCT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	TSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.013 mA		1	1			GULL WING		5 V			SMALL OUTLINE, THIN PROFILE			.95 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		2	18 V	1.1 mm	1.6 mm		1.8 V			e4		30		260		2.9 mm	YES
UCC29002DR/1G4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BICMOS		GULL WING		12 V	12		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	105 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1		1.75 mm	3.9 mm	Not Qualified				e4		30		260		4.9 mm	YES
BQ35100PW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING		3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		2	4.5 V	1.2 mm	4.4 mm		2.7 V			e4		30		260		5 mm	NO
BQ7693006DBTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	30	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G30		2	25 V	1.2 mm	4.4 mm		6 V	DETECTION THRESHOLD VOLTAGE= 0.7V		e4		30		260	+0.7V	7.8 mm	YES
BQ7693007DBTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	30	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G30		2	25 V	1.2 mm	4.4 mm		6 V	DETECTION THRESHOLD VOLTAGE= 0.7V		e4		30		260	+0.7V	7.8 mm	YES
BQ7791508PW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.08 mA		1	6			GULL WING		20 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24		2	25 V	1.2 mm	4.4 mm		3 V	Battery over-voltage protection(Min/Max)(V) : 3 and 4.575		e4		30		260		7.8 mm	YES
LM3658SDX-A/NOPB	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	1000 mA		1	1			NO LEAD		5 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	S-PDSO-N10		1	6 V	.8 mm	3 mm	Not Qualified	4.5 V	RESTART THRESHOLD VOLTAGE IS 4 VOLT		e3		30		260	+4V	3 mm	YES
TL7705ACDE4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	COMMERCIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3 mA		1	1	BIPOLAR		GULL WING		5 V	3.5/18		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	70 Cel		0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8		1	18 V	1.75 mm	3.9 mm	Not Qualified	3.5 V	THRESHOLD VOLTAGE IS 4.55V		e4		NOT SPECIFIED		260	4.55	4.9 mm	NO
TPS3808G18DBVRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.006 mA		1	1			GULL WING		3.3 V	1.8/6.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	125 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6		1	6.5 V	1.45 mm	1.6 mm	Not Qualified	1.7 V	DETECTOR THRESHOLD VOLTAGE IS 1.67V		e4		NOT SPECIFIED		260	+1.67V	2.9 mm	NO
TPS3825-50DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1			GULL WING		3.3 V	1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 4.55V		e4		NOT SPECIFIED		260	+4.55V	2.9 mm	NO
BQ25120AYFPT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	25	VFBGA	RECTANGULAR	YES		UNSPECIFIED			1	4			BALL		5 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel		-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B25		1	5.5 V	.5 mm	2.468 mm		3.4 V			e1		30		260		2.53 mm	YES
BQ25172DSGR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT		8	HVSON	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20		.5 mm	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8		1	18 V	.8 mm	2 mm		3 V			e4				260	+1.33V	2 mm	YES
BQ25890RTWR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD		5 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N24		2	14 V	.8 mm	4 mm		3.9 V			e4		NOT SPECIFIED		260		4 mm	YES
TLV809EA46DBZR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	AUTOMOTIVE	3	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0012 mA		1	1			GULL WING		3.3 V			SMALL OUTLINE	TO-236		.95 mm	125 Cel		-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G3		1	6 V	1.12 mm	1.3 mm		1.7 V			e3		NOT SPECIFIED		260	4.63	2.92 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.