INDUSTRIAL Switching Regulators & Controllers 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	Maximum Negative Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
TPS54327DDAR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	HLSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY	1.2 mA	3 A	1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	7 V	DUAL	R-PDSO-G8	2		1.7 mm	3.9 mm	Not Qualified		6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76 TO 7V	4.5 V		e4	NOT SPECIFIED	1	260	4.9 mm	5.5 V	18 V
EN5337QI-T	Intel	SWITCHING REGULATOR	INDUSTRIAL	38	HQCCN	RECTANGULAR	YES	5500 kHz	UNSPECIFIED		3 A	1			NO LEAD	PULSE WIDTH MODULATION		BUCK	CHIP CARRIER, HEAT SINK/SLUG	LCC38,.16X.28,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		QUAD	R-XQCC-N38	3		1.9 mm	4 mm	Not Qualified		5.5 V	OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V	2.375 V		e3	30		260	7 mm		5.5 V
UCC28C44DGKRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION		SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Switching Regulator or Controllers	.65 mm	105 Cel		VOLTAGE-MODE	-40 Cel			DUAL	S-PDSO-G8	2		1.1 mm	3 mm	Not Qualified		15 V	ALSO OPERATES IN CURRENT MODE	12 V			30		260	3 mm		18 V
ICL7660SIPAZ	Renesas Electronics	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	10 kHz	PLASTIC/EPOXY			1	CMOS		THROUGH-HOLE			DOUBLER	IN-LINE	DIP8,.3		2.54 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDIP-T8			5.33 mm	7.62 mm			5 V		1.5 V		e3				9.585 mm		12 V
LM2621MMX/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	2000 kHz	PLASTIC/EPOXY		2.85 A	1	BICMOS		GULL WING	HYSTERETIC CURRENT MODE		BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Switching Regulator or Controllers	.65 mm	85 Cel	1.24 V	VOLTAGE-MODE	-40 Cel	MATTE TIN	14 V	DUAL	S-PDSO-G8	1		1.09 mm	3 mm	Not Qualified		3.3 V		1.2 V		e3	30	1	260	3 mm		14 V
REG71050DRVR	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	6	HVSON	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		.06 A	1			NO LEAD			DOUBLER INVERTER	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,25	Other Analog ICs	.65 mm	85 Cel	5 V		-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	S-PDSO-N6	2		.8 mm	2 mm	Not Qualified		3.25 V		2.7 V		e4	30	1	260	2 mm	5 V	5.5 V
TPS54334DDAT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	HLSOP	RECTANGULAR	YES	684 kHz	PLASTIC/EPOXY		3 A	1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G8			1.7 mm	3.9 mm	Not Qualified			ADJUSTABLE OUTPUT MODE FROM 0.8 TO 24V	4.2 V						4.9 mm		28 V
TPS63700DRCR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1380 kHz	PLASTIC/EPOXY		.36 A	1			NO LEAD	PULSE WIDTH MODULATION		INVERTER	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-15 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	-2 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM -2 TO -15V	2.7 V		e4	NOT SPECIFIED		260	3 mm		5.5 V
LM3670MF-3.3/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	1300 kHz	PLASTIC/EPOXY		.75 A	1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.953 mm	85 Cel	.7 V	VOLTAGE-MODE	-40 Cel	Matte Tin (Sn)	3.3 V	DUAL	R-PDSO-G5	1		1.22 mm	1.6 mm	Not Qualified		3.6 V	AUTOMATIC PFM/PWM MODE SWITCHING	3.6 V		e3	NOT SPECIFIED	1	260	2.92 mm		5.5 V
TPS40057PWPR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		20 A	1			GULL WING	PULSE WIDTH MODULATION		PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	.7 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	35 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		24 V		8 V		e4	30	1	260	5 mm	32.2 V	40 V
TPS563209DDCT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	650 kHz	PLASTIC/EPOXY		3 A	1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	85 Cel	.76 V		-40 Cel	MATTE TIN	7 V	DUAL	R-PDSO-G6	1		1.1 mm	1.6 mm			12 V	OUTPUT VOLTAGE IS 0.76 TO 7V	4.5 V		e3	30	1	260	2.9 mm		17 V
UCC28089DG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	9 V	PUSH-PULL	SMALL OUTLINE			1.27 mm	105 Cel	2 V		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified		9 V		8.5 V		e4	30		260	4.9 mm		14 V
UCC2895DWTR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	6 mA	.1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	12 V	PHASE-SHIFT	SMALL OUTLINE	SOP20,.4	Switching Regulator or Controllers	1.27 mm	85 Cel	4.94 V	CURRENT/VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.06 V	DUAL	R-PDSO-G20	2	16.5 V	2.65 mm	7.5 mm	Not Qualified	10 V	12 V	ALSO OPERATES IN CURRENT MODE	10 V		e4	NOT SPECIFIED		260	12.8 mm	5 V	16.5 V
TPS54541DPRR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		5 A	1			NO LEAD	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.16,32	Switching Regulator or Controllers	.8 mm	85 Cel	.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	41 V	DUAL	S-PDSO-N10	2		.8 mm	4 mm	Not Qualified		12 V		4.5 V		e4	NOT SPECIFIED	1	260	4 mm		42 V
TPS65131RGER	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	24	HVQCCN	SQUARE	YES	1500 kHz	PLASTIC/EPOXY		2.2 A	1			NO LEAD	PULSE WIDTH MODULATION		BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Other Analog ICs	.5 mm	85 Cel	3.2 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	15 V	QUAD	S-PQCC-N24	2		1 mm	4 mm	Not Qualified		3.6 V		2.7 V	-2 V	e4	NOT SPECIFIED		260	4 mm		5.5 V
MCP16251T-I/CH	Microchip Technology	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	575 kHz	PLASTIC/EPOXY		.1 A	1		TS 16949	GULL WING	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	85 Cel	1.8 V		-40 Cel	MATTE TIN	5.5 V	DUAL	R-PDSO-G6	1		1.45 mm	1.55 mm			1.5 V		.82 V		e3	40		260	2.9 mm	3.3 V
MCP1640BT-I/CHY	Microchip Technology	SWITCHING REGULATOR	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	575 kHz	PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel	2 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G6	1		1.45 mm	1.55 mm	Not Qualified		1.2 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 2V TO 5.5V			e4			260	2.9 mm	3.3 V
TPS630250RNCR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	14	VQCCN	RECTANGULAR	YES	2500 kHz	PLASTIC/EPOXY		2 A	1			NO LEAD	PULSE WIDTH MODULATION		BUCK-BOOST	CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	2.5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.6 V	QUAD	R-PQCC-N14	1		1 mm	2.5 mm			2.8 V	OPERATES IN ADJUSTABLE MODE FROM 2.3V TO 3.6V; ALSO OPERATES IN PFM MODE	2.3 V		e4	30		260	3 mm		5.5 V
LMZ12002EXTTZE/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7	HSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		2 A	1			GULL WING			BUCK	SMALL OUTLINE, HEAT SINK/SLUG	SMSIP7H,.55,50	Switching Regulator or Controllers	1.27 mm	85 Cel	.8 V	VOLTAGE-MODE	-40 Cel	MATTE TIN	6 V	SINGLE	R-PSSO-G7	3		4.82 mm	9.85 mm	Not Qualified		12 V	ALSO OPRERATES IN ADJUSTABLE MODE FROM 0.8 TO 6 V	4.5 V		e3	30	1	245	10.16 mm	1.8 V	20 V
TPS611781RNWT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	13	QCCN	RECTANGULAR	YES	2500 kHz	PLASTIC/EPOXY		8.7 A	1			NO LEAD	PULSE WIDTH MODULATION		BOOST	CHIP CARRIER				85 Cel	4.5 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	20 V	BOTTOM	R-PBCC-N13	2		1 mm	3 mm			6 V	VOUT RANGE=(4.5-20 VOLT)	2.7 V		e4	NOT SPECIFIED	1	NOT SPECIFIED	3.5 mm	16 V	20 V
MAX17223ENT+	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	2500 kHz	PLASTIC/EPOXY		.575 A	1			BALL	PULSE FREQUENCY MODULATION	1.5 V	BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,16		.4 mm	85 Cel	1.8 V		-40 Cel	TIN SILVER COPPER NICKEL	5 V	BOTTOM	R-PBGA-B6	1		.5 mm	.887 mm			1.5 V	OUTPUT VOLTAGE= 1.8V TO 5V	.4 V		e2	30		260	1.417 mm	3 V	5.5 V
EN5337QI	Intel	SWITCHING REGULATOR	INDUSTRIAL	38	HQCCN	RECTANGULAR	YES	5000 kHz	UNSPECIFIED			1			NO LEAD	PULSE WIDTH MODULATION		BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	Matte Tin (Sn) - annealed		QUAD	R-XQCC-N38	3		1.9 mm	4 mm				ADJUSTABLE OUTPUT VOLTAGE RANGE 0.6 TO 5	2.375 V		e3	30		260	7 mm		5.5 V
TPS61081DRCRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1200 kHz	PLASTIC/EPOXY		1.3 A	1			NO LEAD	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	2.7 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	27 V	DUAL	R-PDSO-N10	2		1 mm	3 mm	Not Qualified		3.6 V		2.5 V		e4	NOT SPECIFIED	1	260	3 mm		6 V
ICL7660SIBAZ	Renesas Electronics	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	35 kHz	PLASTIC/EPOXY			1	CMOS		GULL WING			DOUBLER	SMALL OUTLINE	SOP8,.25		1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm			5 V		1.5 V		e3	30		260	4.9 mm		12 V
LMZ10504TZ-ADJ/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7	HSOP	RECTANGULAR	YES	1160 kHz	PLASTIC/EPOXY		4 A	1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG	SMSIP7H,.55,50TB	Switching Regulator or Controllers	1.27 mm	85 Cel	.8 V	VOLTAGE-MODE	-40 Cel	MATTE TIN	5 V	SINGLE	R-PSSO-G7	3		4.82 mm	9.85 mm	Not Qualified		3.3 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5 V	2.95 V		e3	30	1	245	10.16 mm		5.5 V
TPS61025DRCR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	720 kHz	PLASTIC/EPOXY		1.8 A	1			NO LEAD	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	3.3 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.3 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V		.9 V		e4	NOT SPECIFIED	1	260	3 mm	3.3 V	6.5 V
TPS62160DSG	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY		2.45 A	1			NO LEAD	HYSTERETIC CURRENT MODE		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	S-PDSO-N8			.8 mm	2 mm			12 V	ADJST O/P VOLT FRM 0.9V TO 6V; ALS OPRTS IN VOLT MODE AND PWM CTRL TECHNQ ALS POSBL	3 V						2 mm		17 V
TPS562200DDCT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	650 kHz	PLASTIC/EPOXY		4.3 A	1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	85 Cel	.76 V		-40 Cel	Matte Tin (Sn)	7 V	DUAL	R-PDSO-G6	1		1.1 mm	1.6 mm			12 V	OUTPUT VOLTAGE IS 0.76 TO 7V	4.5 V		e3	NOT SPECIFIED	1	260	2.9 mm		17 V
MAX17223ELT+	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	6	VSON	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		.575 A	1			NO LEAD	PULSE FREQUENCY MODULATION	1.5 V	BOOST	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.08,25		.65 mm	85 Cel	1.8 V		-40 Cel	GOLD NICKEL	5 V	DUAL	S-PDSO-N6	1		.8 mm	2 mm			1.5 V	OUTPUT VOLTAGE= 1.8V TO 5V	.4 V		e4	30		260	2 mm	3 V	5.5 V
MAX17222ELT+	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	6	VSON	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		.575 A	1			NO LEAD	PULSE FREQUENCY MODULATION	1.5 V	BOOST	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.08,25		.65 mm	85 Cel	1.8 V		-40 Cel	GOLD NICKEL	5 V	DUAL	S-PDSO-N6	1		.8 mm	2 mm			1.5 V	OUTPUT VOLTAGE= 1.8V TO 5V	.4 V		e4	30		260	2 mm	3 V	5.5 V
RT8279GSP	Richtek Technology	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	575 kHz	PLASTIC/EPOXY		5 A				GULL WING				SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G8					Not Qualified
TPS53318DQPR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	22	HSON	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		8 A	1			NO LEAD	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG			.5 mm	85 Cel	.6 V		-40 Cel	Matte Tin (Sn)	5.5 V	DUAL	R-PDSO-N22	2		1.5 mm	5 mm			12 V	ALSO REQ VDD 4.5 TO 25 V; ADJUSTABLE OUTPUT MODE FROM 0.6 TO 5.5 V	1.5 V		e3	NOT SPECIFIED	1	260	6 mm		22 V
TPS61090RSARG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		2.5 A	1			NO LEAD	PULSE WIDTH MODULATION		BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified				1.8 V		e4	NOT SPECIFIED	1	260	4 mm		5.5 V
EP5388QI	Intel	SWITCHING REGULATOR	INDUSTRIAL	16	QCCN	SQUARE	YES	4000 kHz	UNSPECIFIED		.8 A	1			NO LEAD	PULSE WIDTH MODULATION		BUCK	CHIP CARRIER	LCC16,.12SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		QUAD	S-XQCC-N16	3		1.15 mm	3 mm	Not Qualified		3.6 V	OUTPUT VOLTAGE RANGE FROM 0.603 V TO 5 V	2.4 V		e3				3 mm		5.5 V
LMZ36002RVQR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	43		SQUARE	YES	1000 kHz	PLASTIC/EPOXY		2 A	1			NO LEAD	PULSE WIDTH MODULATION		BUCK-BOOST	SPECIAL SHAPE				105 Cel	2.5 V		-40 Cel	NICKEL PALLADIUM GOLD	7.5 V	UNSPECIFIED	S-PXSS-N43	3		2.13 mm	10 mm			24 V	SEATED HGT-NOM, ALSO OPTS IN PFM CTRL TCHQ, ALS OPTS IN ADJ MODE FROM 2.5 TO 7.5V	4.5 V		e4	30	1	245	10 mm	5 V	60 V
LT4295IUFD#TRPBF	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	28	HVQCCN	RECTANGULAR	YES	320 kHz	PLASTIC/EPOXY			1			NO LEAD			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		QUAD	R-PQCC-N28	1		.8 mm	4 mm			40 V				e3			260	5 mm		60 V
TPS54229DDAR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	HLSOP	RECTANGULAR	YES	650 kHz	PLASTIC/EPOXY		2 A	1			GULL WING	PULSE WIDTH MODULATION	12 V	BUCK	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	7 V	DUAL	R-PDSO-G8	2		1.7 mm	3.9 mm	Not Qualified		12 V	OPERATES IN ADJUSTABLE MODE FROM 0.76 TO 7V	4.5 V		e4	30	1	260	4.9 mm	5.5 V	18 V
AP3428KTTR-G1	Diodes Incorporated	SWITCHING REGULATOR	INDUSTRIAL	5	VSSOP	RECTANGULAR	YES	1500 kHz	PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION	5 V	BUCK	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel	.6 V		-40 Cel	MATTE TIN	5.5 V	DUAL	R-PDSO-G5			1 mm	1.6 mm			5 V		2.5 V		e3			260	2.9 mm	2.5 V	5.5 V
LT3470ETS8#TRPBF	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES		PLASTIC/EPOXY		.2 A	1			GULL WING	HYSTERETIC CURRENT MODE		BUCK	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.11		.65 mm	85 Cel	1.25 V	CURRENT-MODE	-40 Cel	MATTE TIN	16 V	DUAL	R-PDSO-G8	1		1 mm	1.625 mm	Not Qualified		10 V		4 V		e3	30		260	2.9 mm		40 V
TPS61099YFFT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	3000 kHz	UNSPECIFIED		1.25 A	1			BALL	HYSTERETIC CURRENT MODE		BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	5.5 V	BOTTOM	R-XBGA-B6	1		.625 mm	.884 mm			3.7 V	OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	.7 V		e1	NOT SPECIFIED	1	260	1.226 mm		5.5 V
UCC28600DG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	130 kHz	PLASTIC/EPOXY		1.2 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	15 V	BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified		15 V	RESONANT CONTROL TECHNIQUE IS ALSO AVAILABLE	9.3 V		e4	30		260	4.9 mm		21 V
LM2664M6	Texas Instruments	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	80 kHz	PLASTIC/EPOXY	.5 mA	.04 A	1	CMOS		GULL WING		5 V	DOUBLER INVERTER	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Other Analog ICs	.95 mm	85 Cel	-5.5 V		-40 Cel	TIN LEAD	-1.8 V	DUAL	R-PDSO-G6	1		1.22 mm	1.6 mm	Not Qualified		5 V		1.8 V		e0		1	260	2.92 mm	-5.5 V	5.5 V
TPS62067DSGR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	SQUARE	YES	3400 kHz	PLASTIC/EPOXY		2 A	1			NO LEAD	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	.8 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	6 V	DUAL	S-PDSO-N8	2		.8 mm	2 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 6V; PFM CONTROL TECHNIQUE ALSO POSSIBLE	2.9 V		e4	30	1	260	2 mm		6 V
UC2854BDWG4	Texas Instruments	POWER FACTOR CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	120 kHz	PLASTIC/EPOXY	12 mA	1.5 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION	18 V	BOOST	SMALL OUTLINE	SOP16,.4	Switching Regulator or Controllers	1.27 mm	85 Cel	7.4 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	7.6 V	DUAL	R-PDSO-G16	2	20 V	2.65 mm	7.5 mm	Not Qualified		18 V		10 V		e4	NOT SPECIFIED		260	10.3 mm	7.5 V	20 V
TPS62122DRVT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	HVSON	SQUARE	YES	800 kHz	PLASTIC/EPOXY		.075 A	1			NO LEAD	PULSE WIDTH MODULATION	8 V	BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.2 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	5.5 V	DUAL	S-PDSO-N6	1		.8 mm	2 mm	Not Qualified		8 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE, OUTPUT VOLTAGE RANGE 1.2V TO 5.5V	2 V		e4	NOT SPECIFIED	1	260	2 mm		15 V
ICL7662EBA	Maxim Integrated	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	10 kHz	PLASTIC/EPOXY	.6 mA	.02 A	1	CMOS		GULL WING			DOUBLER INVERTER	SMALL OUTLINE	SOP8,.25	Other Analog ICs	1.27 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified		15 V		4.5 V		e0			245	4.9 mm		20 V
ICL7662EBA+	Analog Devices	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	10 kHz	PLASTIC/EPOXY	.6 mA	.02 A	1	CMOS		GULL WING			DOUBLER INVERTER	SMALL OUTLINE	SOP8,.25	Other Analog ICs	1.27 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified		15 V		4.5 V		e3	30		260	4.9 mm		20 V
TPS62056DGSR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		.8 A	1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel	3.3 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	3.3 V	DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified		7.2 V	ALSO HAS CONTROL TECHNIQUE OF PFM	2.7 V		e4	30	1	260	3 mm	3.3 V	10 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.