INDUSTRIAL Switching Regulators & Controllers 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	Maximum Negative Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
UCC2808D-2G4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	20 mA	1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	10 V		PUSH-PULL	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	14 V	1.75 mm	3.9 mm	Not Qualified	5 V	10 V		4.3 V		e4	30		260	4.9 mm		14 V
FAN4860UMP5X	Onsemi	POWER FACTOR CONTROLLER WITH POST REGULATOR	INDUSTRIAL	6	HVSON	SQUARE	YES	3000 kHz	PLASTIC/EPOXY		1.32 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE	SOLCC6,.08,25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N6	1		.55 mm	2 mm	Not Qualified		3.6 V	ALSO HAS CONTROL TECHNIQUE OF PFM	2.3 V		e4	30		260	2 mm	5.05 V	4.5 V
TPS62133RGTR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	5 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5 V	QUAD	S-PQCC-N16	2		1 mm	3 mm	Not Qualified		12 V	ALSO OPERATES IN CURRENT MODE	3 V		e4	NOT SPECIFIED	1	260	3 mm	5 V	17 V
TPS63700DRCRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1380 kHz	PLASTIC/EPOXY		1.14 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-15 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	-2 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM -2 TO -15V	2.7 V		e4	NOT SPECIFIED		260	3 mm		5.5 V
AP3440FNTR-G1	Diodes Incorporated	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	2000 kHz	UNSPECIFIED		4 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-XQCC-N16	1		.65 mm	3 mm			5 V		2.95 V		e4	30		260	3 mm		5.5 V
REG710NA-5/3K	Texas Instruments	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		.03 A	1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Other Analog ICs	.95 mm	85 Cel	5 V		-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	R-PDSO-G6	1		1.45 mm	1.6 mm	Not Qualified		3.25 V		2.7 V		e4	30	1	260	2.9 mm	5 V	5.5 V
TPS60402DBVRG4	Texas Instruments	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	80 kHz	PLASTIC/EPOXY		.06 A	1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	-5.25 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	-1.6 V	DUAL	R-PDSO-G5	1		1.45 mm	1.6 mm	Not Qualified		5 V		1.8 V		e4	NOT SPECIFIED	1	260	2.9 mm		5.25 V
TPS23770PWP	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	565 kHz	PLASTIC/EPOXY		1.3 A	1			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified		48 V		0 V		e4	30		260	6.5 mm		67 V
TPS62112RSAT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	1100 kHz	PLASTIC/EPOXY		1.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel	5 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		12 V	PFM MODE IS ALSO AVAILABLE	3.1 V		e4	NOT SPECIFIED	1	260	4 mm	5 V	17 V
TPS630250YFFR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	20	VFBGA	RECTANGULAR	YES	2500 kHz	UNSPECIFIED		2 A	1			BALL	PULSE WIDTH MODULATION			BUCK-BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	2.5 V	CURRENT-MODE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	3.6 V	BOTTOM	R-XBGA-B20	1		.625 mm	1.766 mm			2.8 V	OPERATES IN ADJUSTABLE MODE FROM 2.3V TO 3.6V; ALSO OPERATES IN PFM MODE	2.3 V		e1	30		260	2.086 mm		5.5 V
TPS61090RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		2.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified				1.8 V		e4	NOT SPECIFIED	1	260	4 mm		5.5 V
NCP1529ASNT1G	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	2200 kHz	PLASTIC/EPOXY		1 A	1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1		1.1 mm	1.5 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 3.9V; IT CAN ALSO OPERATE WITH PFM MODE	2.7 V		e3	30		260	3 mm		5.5 V
TC1044SEOA	Microchip Technology	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	45 kHz	PLASTIC/EPOXY	.18 mA		1			GULL WING				DOUBLER INVERTER	SMALL OUTLINE	SOP8,.25		1.27 mm	85 Cel	-1.5 V		-40 Cel	MATTE TIN	-12 V	DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified		5 V		1.5 V		e3	40		260	4.9 mm		12 V
TPS62150ARGTT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		1 A	1			NO LEAD	PULSE WIDTH MODULATION	12 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	.9 V	CURRENT/VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	6.3 V	QUAD	S-PQCC-N16	2		1 mm	3 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 6V	3 V		e4	30	1	260	3 mm		17 V
UCC2804DTR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	25 mA	1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	10 V		BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	12 V	1.75 mm	3.9 mm	Not Qualified	12.5 V	10 V		9 V		e4	NOT SPECIFIED		260	4.9 mm		12 V
FSL136HRLX	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	110 kHz	PLASTIC/EPOXY						GULL WING					SMALL OUTLINE	GWDIP8,.4	Switching Regulator or Controllers	2.54 mm	105 Cel		CURRENT-MODE	-40 Cel	TIN		DUAL	R-PDSO-G8	3				Not Qualified						e3	30		250
LMZ31506RUQR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL		HQCCN	RECTANGULAR	YES	780 kHz	PLASTIC/EPOXY		6 A	1			NO LEAD				BUCK	CHIP CARRIER, HEAT SINK/SLUG				85 Cel	.6 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	R-PQCC-N47	3		2.9 mm						2.95 V		e4	30	1	245			14.5 V
TPS40200DRBR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	HVSON	SQUARE	YES	500 kHz	PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel	.7 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	46 V	DUAL	S-PDSO-N8	2		1 mm	3 mm	Not Qualified		12 V		4.5 V		e4	30	1	260	3 mm		52 V
TPS84620RUQR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	47	QCCN	SQUARE	YES	560 kHz	PLASTIC/EPOXY		6 A	1			NO LEAD				BUCK	CHIP CARRIER	LCC47(UNSPEC)	Switching Regulator or Controllers	.9 mm	85 Cel	1.2 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	S-PQCC-N47	3		2.9 mm	9 mm	Not Qualified		12 V		4.5 V		e4	30	1	245	15 mm	1.8 V	14.5 V
LM2623AMMX/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	2000 kHz	PLASTIC/EPOXY		2.2 A	1	BICMOS		GULL WING	PULSE FREQUENCY MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Switching Regulator or Controllers	.65 mm	85 Cel	1.24 V	VOLTAGE-MODE	-40 Cel	MATTE TIN	14 V	DUAL	S-PDSO-G8	1		1.09 mm	3 mm	Not Qualified		3.3 V		.8 V		e3	30	1	260	3 mm		14 V
MIC3809YM-TR	Microchip Technology	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	20 mA	1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE	SOP8,.25		1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1		1.879 mm	3.9 mm	Not Qualified		10 V		4.3 V		e4	30		260	4.9 mm
NCP1532MUAATXG	Onsemi	DUAL SWITCHING CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	2700 kHz	UNSPECIFIED		.6 A	1			NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-XDSO-N10	1		.55 mm	3 mm	Not Qualified		3.6 V	PFM CONTROL TECHNIQE ALSO POSSIBLE, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 3.3V	2.7 V		e3	30		260	3 mm		5.5 V
TPS61030RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		4.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		2.4 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.8V TO 5.5V	1.8 V		e4	30	1	260	4 mm		5.5 V
TPS61252DSGR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	SQUARE	YES	3500 kHz	PLASTIC/EPOXY		1.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	3 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	6.5 V	DUAL	S-PDSO-N8	2		.8 mm	2 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 3 TO 6.5V, ALSO HAS CONTROL TECHNIQUE OF PFM	2.3 V		e4	30	1	260	2 mm	5 V	6 V
TPS65100RGER	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	24	HVQCCN	SQUARE	YES	2100 kHz	PLASTIC/EPOXY	.9 mA	2.6 A	1	CMOS		NO LEAD	PULSE WIDTH MODULATION	3.3 V	3.3	BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N24	2		1 mm	4 mm	Not Qualified		3.3 V		2.7 V	-2 V	e4	30		260	4 mm	3.3 V	5.8 V
LM2660MX/NOPB	Texas Instruments	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	40 kHz	PLASTIC/EPOXY		.1 A	1	CMOS		GULL WING				DOUBLER INVERTER	SMALL OUTLINE	SOP8,.25	Other Analog ICs	1.27 mm	85 Cel	-5.5 V		-40 Cel	MATTE TIN	11 V	DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified		5 V		1.5 V		e3	30	1	260	4.9 mm		5.5 V
TPS65145PWPR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	24	HTSSOP	RECTANGULAR	YES	2100 kHz	PLASTIC/EPOXY	.9 mA	1.56 A	1	CMOS		GULL WING	PULSE WIDTH MODULATION	3.3 V	3.3	BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Power Management Circuits	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G24	2		1.2 mm	4.4 mm	Not Qualified		3.3 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 5V TO 15V	2.7 V	-2 V	e4	30		260	7.8 mm	3.3 V	5.5 V
UCC2803PWTR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY	25 mA	1 A	1	BICMOS		GULL WING	PULSE WIDTH MODULATION	10 V		BUCK-BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	2	12 V	1.2 mm	3 mm	Not Qualified	4.1 V	10 V		4 V		e4	NOT SPECIFIED		260	4.4 mm		12 V
ADP3050ARZ	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	240 kHz	PLASTIC/EPOXY		2.1 A	1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified		10 V	OUTPUT VOLTAGE IS ADJUSTABLE FROM 1.25 TO 12V	3.6 V		e3	30		260	4.9 mm		30 V
LMZ22003TZ/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	7	HSOP	RECTANGULAR	YES	950 kHz	PLASTIC/EPOXY		3 A	1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG			1.27 mm	85 Cel	.8 V	CURRENT-MODE	-40 Cel	MATTE TIN	6 V	SINGLE	R-PSSO-G7	3		4.82 mm	9.85 mm			12 V	OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 6V	6 V		e3	30	1	245	10.16 mm	3.3 V	20 V
UCC28600TDRQ1	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	130 kHz	PLASTIC/EPOXY		1.2 A	1		AEC-Q100	GULL WING	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified		15 V				e4	30		260	4.9 mm		21 V
PTN78000AAS	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	5		RECTANGULAR	YES	660 kHz	PLASTIC/EPOXY		1.5 A	1	HYBRID		BALL				BUCK-BOOST	MICROELECTRONIC ASSEMBLY				85 Cel	-15 V		-40 Cel	Tin/Lead (Sn/Pb)	-3 V	DUAL	R-PDMA-B5	1		9.09 mm	12.57 mm	Not Qualified		12 V	OUTPUT VOLTAGE ADJUST RANGE -15 TO -3	7 V		e0	20	1	235	18.92 mm	-5 V	28.7 V
REG71050DRVRG4	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	6	HVSON	SQUARE	YES	1000 kHz	PLASTIC/EPOXY			1			NO LEAD				DOUBLER INVERTER	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,25	Other Analog ICs	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N6	2		.8 mm	2 mm	Not Qualified		3.25 V		2.7 V		e4	30		260	2 mm	5 V	5.5 V
TPS63030DSK	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	2600 kHz	PLASTIC/EPOXY		1.1 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	S-PDSO-N10			.8 mm	2.5 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.2 V TO 5.5 V	1.8 V						2.5 mm		5.5 V
NCV890430MW50TXG	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	SQUARE	YES	2000 kHz	PLASTIC/EPOXY		1.9 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N8	1		1 mm	3 mm			13.2 V		3.5 V		e3	30		260	3 mm	5 V	37 V
ADUM5211ARSZ-RL7	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	125000 kHz	PLASTIC/EPOXY			1	CMOS		GULL WING	PULSE WIDTH MODULATION	5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Other Analog ICs	.65 mm	105 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G20	1		2 mm	5.3 mm	Not Qualified		3.3 V		3 V		e3	30		260	7.2 mm	3.3 V	3.6 V
LMZ31503RUQT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	47	HQCCN	RECTANGULAR	YES	780 kHz	PLASTIC/EPOXY		3 A	1			NO LEAD				BUCK	SPECIAL SHAPE	LCC47(UNSPEC)	Switching Regulator or Controllers	.9 mm	85 Cel	.8 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	UNSPECIFIED	R-PXSS-N47	3		2.9 mm	9 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V, ALSO REQUIRE 1.6 TO 14.5V INPUT	4.5 V		e4	30	1	245	15 mm	1.8 V	14.5 V
PAM2306AYPKE	Diodes Incorporated	DUAL SWITCHING CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	1500 kHz	PLASTIC/EPOXY			1			NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	S-PDSO-N12			.8 mm	3 mm			3.6 V	VOUT1=3.3 VOLT	2.5 V					260	3 mm	1.8 V	5.5 V
PTH08080WAH	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	5		RECTANGULAR	NO	300 kHz	PLASTIC/EPOXY		2.25 A	1	HYBRID		THROUGH-HOLE				BUCK	MICROELECTRONIC ASSEMBLY				85 Cel	.9 V	VOLTAGE-MODE	-40 Cel	Matte Tin (Sn)	5.5 V	DUAL	R-PDMA-T5			8.18 mm		Not Qualified		12 V	OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 18V	4.5 V		e3	NOT SPECIFIED	1	NOT SPECIFIED		3.3 V	18 V
RT7272BGSP	Richtek Technology	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	550 kHz	PLASTIC/EPOXY		3 A	1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE	SOP8,.25		1.27 mm	85 Cel	.8 V	CURRENT-MODE	-40 Cel		30 V	DUAL	R-PDSO-G8			1.753 mm	3.905 mm			12 V		4.5 V			NOT SPECIFIED		NOT SPECIFIED	4.9025 mm		36 V
TPS62113RSAT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	1100 kHz	PLASTIC/EPOXY		1.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel	1.2 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	16 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.2V TO 16V ; PFM MODE IS ALSO AVAILABLE	3.1 V		e4	NOT SPECIFIED	1	260	4 mm		17 V
TPS65100PWPRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	24	HTSSOP	RECTANGULAR	YES	2100 kHz	PLASTIC/EPOXY	.9 mA	2.6 A	1	CMOS		GULL WING	PULSE WIDTH MODULATION	3.3 V	3.3	BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Power Management Circuits	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G24	2		1.2 mm	4.4 mm	Not Qualified		3.3 V		2.7 V		e4	30		260	7.8 mm		5.8 V
LM3671MF-1.25/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	2600 kHz	PLASTIC/EPOXY		1.15 A	1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.953 mm	85 Cel	1.1 V	VOLTAGE-MODE	-40 Cel	Matte Tin (Sn)	3.3 V	DUAL	R-PDSO-G5	1		1.22 mm	1.6 mm	Not Qualified		3.6 V	PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE	2.7 V		e3	NOT SPECIFIED	1	260	2.92 mm		5.5 V
NCP3232NMNTXG	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	40	HVQCCN	SQUARE	YES	500 kHz	UNSPECIFIED		15 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		QUAD	S-XQCC-N40	3		1 mm	6 mm	Not Qualified		12 V		4.5 V		e3	30		260	6 mm		21 V
TPS51116PWPR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY		6 A	1			GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G20	2		1.2 mm	4.4 mm	Not Qualified		5 V		3 V		e4	NOT SPECIFIED		260	6.5 mm		28 V
TPS54610PWPR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		6 A	1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	.9 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	4.5 V	DUAL	R-PDSO-G28	2		1.2 mm	4.4 mm	Not Qualified		5.5 V		3 V		e4	30	1	260	9.7 mm		6 V
TPS62290DRVR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	HVSON	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		1 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel	.6 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	6 V	DUAL	S-PDSO-N6	1		.8 mm	2 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 6V; PFM CONTROL TECHNIQUE ALSO AVAILABLE	2.3 V		e4	30	1	260	2 mm		6 V
UC3845BVD1R2G	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	275 kHz	PLASTIC/EPOXY		1 A	1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1		1.75 mm	3.9 mm	Not Qualified		15 V		12 V		e3	30		260	4.9 mm		25 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.