GULL WING Other Function uPs,uCs & Peripheral ICs 2,400+

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Screening Level	Address Bus Width	No. of Bits	DAC Channels	Bit Size	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	CPU Family	Minimum Operating Temperature	Terminal Finish	ADC Channels	Ultraviolet Erasable	Terminal Position	DMA Channels	Maximum Seated Height	ROM Words	RAM Words	Width	Data EEPROM Size	Additional Features	Peripherals	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	ROM Bits Size	RAM Bytes	Technology	Analog To Digital Convertors	Maximum Supply Current	Nominal Supply Voltage	PWM Channels	Sub-Category	Connectivity	ROM Programmability	Bus Compatibility	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Speed	JESD-609 Code	On Chip Program ROM Width	No. of I/O Lines
NRF5340-QKAA-R7	Nordic Semiconductor Asa	CRYPTOGRAPHIC AUTHENTICATOR		GULL WING	94	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V							CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC94,.27SQ,16	1.7 V	105 Cel		-40 Cel				QUAD		.85 mm			7 mm								7 mm			CMOS			3 V						.4 mm	S-XQCC-N94
NRF5340-QKAA-R	Nordic Semiconductor Asa	CRYPTOGRAPHIC AUTHENTICATOR		GULL WING	94	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V							CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC94,.27SQ,16	1.7 V	105 Cel		-40 Cel				QUAD		.85 mm			7 mm								7 mm			CMOS			3 V						.4 mm	S-XQCC-N94
P82B715DR	Texas Instruments	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V							SMALL OUTLINE		4.5 V	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)			DUAL		1.75 mm			3.9 mm		VCCB(Min)(V) is 3, VCCB(Max)(V) is 12		0	.4 MHz	NOT SPECIFIED	260	4.9 mm			BIPOLAR			5 V					I2C	1.27 mm	R-PDSO-G8	1	Not Qualified		e4
P82B715TD,118	NXP Semiconductors	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V							SMALL OUTLINE		4.5 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD			DUAL		1.75 mm			3.9 mm						30	260	4.9 mm			BIPOLAR			5 V						1.27 mm	R-PDSO-G8	1	Not Qualified		e4
MCP2221-I/SL	Microchip Technology	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	TS 16949						SMALL OUTLINE	SOP14,.24	3 V	85 Cel		-40 Cel	MATTE TIN			DUAL		1.75 mm			3.9 mm								8.65 mm			CMOS			3.3 V						1.27 mm	R-PDSO-G14				e3
AR1100-I/SS	Microchip Technology	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	TS 16949						SMALL OUTLINE, SHRINK PITCH		3.135 V	85 Cel		-40 Cel	MATTE TIN			DUAL		2 mm			5.3 mm		ALSO OPERATES AT 5V SUPPLY				40	260	7.2 mm			CMOS			3.3 V						.65 mm	R-PDSO-G20	2	Not Qualified		e3
PGA460TPWQ1	Texas Instruments	MICROPROCESSOR CIRCUIT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	28 V	AEC-Q100						SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		6 V	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD			DUAL		1.2 mm			4.4 mm		ALSO OPERATES AT 6V-15V FOR TRANSFORMER TOPOLOGY		0		30	260	5 mm			CMOS			12 V					SPI; UART; USART	.65 mm	R-PDSO-G16	2			e4
AR1100-I/SO	Microchip Technology	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	TS 16949						SMALL OUTLINE	SOP20,.4	3.135 V	85 Cel		-40 Cel	MATTE TIN			DUAL		2.65 mm			7.5 mm		ALSO OPERATES AT 5V SUPPLY					260	12.8 mm			CMOS			3.3 V						1.27 mm	R-PDSO-G20	1	Not Qualified		e3
P82B715DRG4	Texas Instruments	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V							SMALL OUTLINE		4.5 V	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)			DUAL		1.75 mm			3.9 mm		VCCB(Min)(V) is 3, VCCB(Max)(V) is 12		0	.4 MHz	NOT SPECIFIED	260	4.9 mm			BIPOLAR			5 V					I2C	1.27 mm	R-PDSO-G8	1	Not Qualified		e4
CY8C3866AXI-039	Infineon Technologies	PROGRAMMABLE SoC	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V						2/5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	1.71 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		N	QUAD		1.6 mm			14 mm						40	260	14 mm	65536 Bits		CMOS			3.3 V		Other uPs/uCs/Peripheral ICs				.5 mm	S-PQFP-G100	3	Not Qualified		e4
ATECC608B-SSHDA-T	Microchip Technology	CRYPTOGRAPHIC AUTHENTICATOR	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V							SMALL OUTLINE	SOP8,.23	2 V	85 Cel		-40 Cel	MATTE TIN			DUAL		1.75 mm			3.9 mm						30	260	4.9 mm			CMOS								I2C	1.27 mm	R-PDSO-G8	1			e3
MCP2221-I/ST	Microchip Technology	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	TS 16949					3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	85 Cel		-40 Cel	MATTE TIN			DUAL		1.2 mm			4.4 mm								5 mm			CMOS		15 mA	3.3 V		Serial IO/Communication Controllers				.65 mm	R-PDSO-G14		Not Qualified		e3
ATECC608B-SSHDA-B	Microchip Technology	CRYPTOGRAPHIC AUTHENTICATOR	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V							SMALL OUTLINE	SOP8,.23	2 V	85 Cel		-40 Cel	MATTE TIN			DUAL		1.75 mm			3.9 mm						30	260	4.9 mm			CMOS								I2C	1.27 mm	R-PDSO-G8	1			e3
CY8C3866AXI-039T	Infineon Technologies	PROGRAMMABLE SoC	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V						2/5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	1.71 V	85 Cel		-40 Cel	PURE TIN		N	QUAD		1.6 mm			14 mm								14 mm	524288 Bits		CMOS			3.3 V		Other uPs/uCs/Peripheral ICs				.5 mm	S-PQFP-G100	3	Not Qualified
FT245RL-REEL	FTDI	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V							SMALL OUTLINE, SHRINK PITCH		3.3 V	85 Cel		-40 Cel				DUAL		2 mm			5.3 mm						40	260	10.2 mm			CMOS									.65 mm	R-PDSO-G28	3	Not Qualified
ATECC608A-SSHDA-B	Microchip Technology	CRYPTOGRAPHIC AUTHENTICATOR	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	TS 16949						SMALL OUTLINE	SOP8,.23	2 V	85 Cel		-40 Cel				DUAL		1.75 mm			3.9 mm								4.9 mm			CMOS									1.27 mm	R-PDSO-G8
FT245BL-REEL	FTDI	MICROPROCESSOR CIRCUIT	COMMERCIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.25 V							FLATPACK, LOW PROFILE		4.35 V	70 Cel		0 Cel	MATTE TIN			QUAD		1.6 mm			7 mm						30	260	7 mm			CMOS			5 V						.8 mm	S-PQFP-G32	3			e3
ATECC608A-SSHDA-T	Microchip Technology	CRYPTOGRAPHIC AUTHENTICATOR	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	TS 16949						SMALL OUTLINE	SOP8,.23	2 V	85 Cel		-40 Cel				DUAL		1.75 mm			3.9 mm								4.9 mm			CMOS									1.27 mm	R-PDSO-G8
AR1100T-I/SS	Microchip Technology	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	TS 16949						SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	3.135 V	85 Cel		-40 Cel	MATTE TIN			DUAL		2 mm			5.3 mm		ALSO OPERATES AT 5V SUPPLY				40	260	7.2 mm			CMOS			3.3 V						.65 mm	R-PDSO-G20	2	Not Qualified		e3
PGA460TPWRQ1	Texas Instruments	MICROPROCESSOR CIRCUIT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	28 V	AEC-Q100						SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		6 V	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD			DUAL		1.2 mm			4.4 mm		ALSO OPERATES AT 6V-15V FOR TRANSFORMER TOPOLOGY		0		30	260	5 mm			CMOS			12 V					SPI; UART; USART	.65 mm	R-PDSO-G16	2			e4
FT245BL	FTDI	MICROPROCESSOR CIRCUIT	COMMERCIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.25 V							FLATPACK, LOW PROFILE		4.35 V	70 Cel		0 Cel	MATTE TIN			QUAD		1.6 mm			7 mm						30	260	7 mm			CMOS			5 V						.8 mm	S-PQFP-G32	3	Not Qualified		e3
CY8C3866AXI-040T	Infineon Technologies	PROGRAMMABLE SoC	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V						2/5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	1.71 V	85 Cel		-40 Cel	PURE TIN		N	QUAD		1.6 mm			14 mm								14 mm	65536 Bits		CMOS			3.3 V		Other uPs/uCs/Peripheral ICs				.5 mm	S-PQFP-G100	3	Not Qualified
P82B715D	Texas Instruments	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V							SMALL OUTLINE		4.5 V	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)			DUAL		1.75 mm			3.9 mm		VCCB(Min)(V) is 3, VCCB(Max)(V) is 12		0	.4 MHz	NOT SPECIFIED	260	4.9 mm			BIPOLAR			5 V					I2C	1.27 mm	R-PDSO-G8	1	Not Qualified		e4
CY8C3866AXI-040	Infineon Technologies	PROGRAMMABLE SoC	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V						2/5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	1.71 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD		N	QUAD		1.6 mm			14 mm						40	260	14 mm	65536 Bits		CMOS			3.3 V		Other uPs/uCs/Peripheral ICs				.5 mm	S-PQFP-G100	3	Not Qualified		e4
DS28CM00R-A00+T	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V							SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		1.62 V	85 Cel		-40 Cel	Matte Tin (Sn) - annealed			DUAL		1.45 mm			1.625 mm		IT ALSO OPERATE AT 1.8 V SUPPLY				30	260	2.9 mm			CMOS			5 V						.95 mm	R-PDSO-G5	1	Not Qualified		e3
PGA460TPWR	Texas Instruments	MICROPROCESSOR CIRCUIT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	28 V							SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		6 V	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD			DUAL		1.2 mm			4.4 mm		ALSO OPERATES AT 6V-15V FOR TRANSFORMER TOPOLOGY		0		30	260	5 mm			CMOS			12 V					SPI; UART; USART	.65 mm	R-PDSO-G16	2			e4
ATECC608B-SSHCZ-T	Microchip Technology	CRYPTOGRAPHIC AUTHENTICATOR	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V							SMALL OUTLINE	SOP8,.23	2 V	85 Cel		-40 Cel				DUAL		1.75 mm			3.9 mm								4.9 mm			CMOS								1-WIRE	1.27 mm	R-PDSO-G8
FT245RL	FTDI	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	28	SSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V							SMALL OUTLINE, SHRINK PITCH		3.3 V	85 Cel		-40 Cel				DUAL		2 mm			5.3 mm						40	260	10.2 mm			CMOS									.65 mm	S-PDSO-G28	3
ATECC608B-SSHCZ-B	Microchip Technology	CRYPTOGRAPHIC AUTHENTICATOR	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V							SMALL OUTLINE	SOP8,.23	2 V	85 Cel		-40 Cel				DUAL		1.75 mm			3.9 mm								4.9 mm			CMOS								1-WIRE	1.27 mm	R-PDSO-G8
FT245RL-TUBE	FTDI	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V							SMALL OUTLINE, SHRINK PITCH		3.3 V	85 Cel		-40 Cel				DUAL		2 mm			5.3 mm								10.2 mm			CMOS									.65 mm	R-PDSO-G28		Not Qualified
MSP430F67791AIPEUR	Texas Instruments	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		0		NO	16		FLATPACK, LOW PROFILE, FINE PITCH		2.4 V	85 Cel	MSP430	-40 Cel	NICKEL PALLADIUM GOLD	YES		QUAD	YES	1.6 mm	524288	32	14 mm	0	IT ALSO OPERATES IN 1.8V MINIMUM SUPPLY	BOR, COMPARATOR(3), DMA(3), RTC, TIMER(4), WDT	0	.032768 MHz	30	260	20 mm		32768	CMOS	6-Ch 10-Bit		3.3 V	YES		I2C(2), IRDA(4), SPI(6), UART(4)	FLASH	I2C; SPI; UART	.5 mm	R-PQFP-G128	3		25 rpm	e4	8	90
ATSHA204A-SSHDA-T	Microchip Technology	CRYPTOGRAPHIC AUTHENTICATOR		GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	TS 16949						SMALL OUTLINE	SOP8,.25	2 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD			DUAL		1.75 mm			3.9 mm						40	260	4.9 mm			CMOS			3.3 V						1.27 mm	R-PDSO-G8	3
P82B715DG4	Texas Instruments	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V							SMALL OUTLINE		4.5 V	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)			DUAL		1.75 mm			3.9 mm		VCCB(Min)(V) is 3, VCCB(Max)(V) is 12		0	.4 MHz	NOT SPECIFIED	260	4.9 mm			BIPOLAR			5 V					I2C	1.27 mm	R-PDSO-G8	1	Not Qualified		e4
FT245BL-T/R	FTDI	MICROPROCESSOR CIRCUIT	COMMERCIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.25 V							FLATPACK, LOW PROFILE		4.35 V	70 Cel		0 Cel	MATTE TIN			QUAD		1.6 mm			7 mm						30	260	7 mm			CMOS			5 V						.8 mm	S-PQFP-G32	3			e3
ATECC608B-SSVDA-T	Microchip Technology	CRYPTOGRAPHIC AUTHENTICATOR	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V							SMALL OUTLINE	SOP8,.23	2 V	100 Cel		-40 Cel	NICKEL PALLADIUM GOLD			DUAL		1.75 mm			3.9 mm						30	260	4.9 mm			CMOS								I2C	1.27 mm	R-PDSO-G8				e4
MCP25020-I/SL	Microchip Technology	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	TS 16949		8			3/5	SMALL OUTLINE	SOP14,.24	2.7 V	85 Cel		-40 Cel	Matte Tin (Sn)			DUAL		1.75 mm			3.9 mm							260	8.65 mm			CMOS			5 V		Parallel IO Port				1.27 mm	R-PDSO-G14	1	Not Qualified		e3
PGA460TPW	Texas Instruments	MICROPROCESSOR CIRCUIT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	28 V							SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		6 V	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD			DUAL		1.2 mm			4.4 mm		ALSO OPERATES AT 6V-15V FOR TRANSFORMER TOPOLOGY		0		30	260	5 mm			CMOS			12 V					SPI; UART; USART	.65 mm	R-PDSO-G16	2			e4
MSP430F6779AIPEUR	Texas Instruments	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		0		NO	16		FLATPACK, LOW PROFILE, FINE PITCH		2.4 V	85 Cel	MSP430	-40 Cel	NICKEL PALLADIUM GOLD	YES		QUAD	YES	1.6 mm	524288	32	14 mm	0	IT ALSO OPERATES IN 1.8V MINIMUM SUPPLY	BOR, COMPARATOR(3), DMA(3), RTC, TIMER(4), WDT	0	.032768 MHz	30	260	20 mm		32768	CMOS	6-Ch 10-Bit		3.3 V	YES		I2C(2), IRDA(4), SPI(6), UART(4)	FLASH	I2C; SPI; UART	.5 mm	R-PQFP-G128	3		25 rpm	e4	8	90
SLB9665TT20FW563XUMA3	Infineon Technologies	CRYPTOGRAPHIC AUTHENTICATOR		GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V							SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V	85 Cel		-20 Cel	TIN			DUAL		1.1 mm			4.4 mm								9.7 mm			CMOS			3.3 V						.65 mm	R-PDSO-G28	3			e3
CY8C4247AZS-M485	Infineon Technologies	PROGRAMMABLE SoC		GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	AEC-Q100						FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	1.71 V	105 Cel		-40 Cel				QUAD		1.6 mm			10 mm								10 mm			CMOS			1.8 V						.5 mm	S-PQFP-G64	3
MCP25050-I/SL	Microchip Technology	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	TS 16949		8			3/5	SMALL OUTLINE	SOP14,.24	2.7 V	85 Cel		-40 Cel	Matte Tin (Sn)			DUAL		1.75 mm			3.9 mm								8.65 mm			CMOS			5 V		Parallel IO Port				1.27 mm	R-PDSO-G14	1	Not Qualified		e3
ATSHA204A-SSHDA-B	Microchip Technology	CRYPTOGRAPHIC AUTHENTICATOR		GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	TS 16949						SMALL OUTLINE	SOP8,.25	2 V	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD			DUAL		1.75 mm			3.9 mm								4.9 mm			CMOS			3.3 V						1.27 mm	R-PDSO-G8	3
CY8C4024AZI-S413	Infineon Technologies	PSoC	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V							FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	1.71 V	85 Cel		-40 Cel	PURE TIN			QUAD		1.6 mm			7 mm								7 mm			CMOS			1.8 V						.5 mm	S-PQFP-G48	3
W5300	Wiznet	MICROPROCESSOR CIRCUIT	COMMERCIAL EXTENDED	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V							FLATPACK, LOW PROFILE, FINE PITCH		3 V	80 Cel		0 Cel				QUAD		1.6 mm			14 mm						40	260	14 mm			CMOS			3.3 V						.5 mm	S-PQFP-G100	3
ATSAM4C16CB-AUR	Microchip Technology	SoC	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1.32 V							FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	1.08 V	85 Cel		-40 Cel	MATTE TIN			QUAD		1.6 mm			14 mm						40	260	14 mm			CMOS			1.2 V						.5 mm	S-PQFP-G100	3			e3
ATSHA204A-STUCZ-T	Microchip Technology	CRYPTOGRAPHIC AUTHENTICATOR		GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	TS 16949						SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TO-236	2 V	85 Cel		-40 Cel	MATTE TIN			DUAL		1.12 mm			1.3 mm						40	260	2.9 mm			CMOS			3.3 V						.95 mm	R-PDSO-G3	1			e3
UCD3138128PFC	Texas Instruments	MICROPROCESSOR CIRCUIT	AUTOMOTIVE	GULL WING	80	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V							FLATPACK, THIN PROFILE, FINE PITCH		3 V	125 Cel		-40 Cel	NICKEL PALLADIUM GOLD	YES		QUAD		1.2 mm			12 mm						30	260	12 mm			CMOS			3.3 V						.5 mm	S-PQFP-G80	3			e4
D2-92633-LR	Renesas Electronics	SoC	OTHER	GULL WING	128	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1.9 V							FLATPACK, LOW PROFILE, FINE PITCH		1.7 V	85 Cel		-10 Cel	MATTE TIN			QUAD		1.6 mm			14 mm						30	260	14 mm			CMOS			1.8 V						.4 mm	S-PQFP-G128	3			e3

Other Function uPs,uCs & Peripheral ICs

Other function uPs, uCs, and peripheral ICs refer to a wide range of integrated circuits that perform a variety of functions beyond the traditional microprocessor and microcontroller roles. These ICs can be found in a variety of electronic devices, including computers, smartphones, automotive systems, and industrial control systems.

Examples of other function ICs include data acquisition and conversion ICs, which are used to convert analog signals into digital data that can be processed by a microcontroller or microprocessor. These ICs are commonly used in industrial control systems and medical equipment, among other applications.

Another example is interface and communication ICs, which facilitate communication between different electronic devices. These ICs can include Ethernet controllers, USB controllers, and serial communication interfaces, among others.

Power management ICs are another important category of other function ICs. These ICs are used to regulate and manage the power supply to electronic devices, ensuring that they operate efficiently and safely. Power management ICs can include voltage regulators, power controllers, and battery management ICs.