SPINDLE Rotary Switches 6

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	Solderability	AC Maximum Rating R Load (Contact)	Center Contact Plating	Housing Material	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	DC Maximum Power Rating R Load (Contact)	Insulation Resistance	Packing Method	Body Length/Diameter	Body Width	Length (Bushing)	Sealing	No. of Switch Sections	Contact Timing	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Washability	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Manufacturer Series	Contact Resistance	Diameter (Bushing)	End Contact Material	PCB Hole Count	No. of Positions	Maximum DC Contact Voltage	Additional Features	Maximum AC Contact Voltage	JESD-609 Code	Indexing Angle	Type (Bushing)	Terminal Length	Material (Actuator)
CK1060	Lorlin Electronics	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	DP6T	SPINDLE			1A@24VAC	SILVER			BRASS	10000 Cycle(s)		1000000000 ohm		26.2 mm		.315 inch		1	MAKE-BEFORE-BREAK		SILVER	14.1 mm	1A@24VDC		85 Cel	1 A	BRASS	-30 Cel	1.654 inch		LATCHED	1 A	SOLDER		20 mohm		BRASS	14	6	24 V		24 V		30 deg	M10X0.75	.161 inch
CK1029	Lorlin Electronics	ROTARY SWITCH	PANEL MOUNT-THREADED	SP12T	SPINDLE			1A@24VAC	SILVER			BRASS	10000 Cycle(s)		999000000 ohm		26.2 mm		.315 inch		1			SILVER	14.1 mm	1A@24VDC		85 Cel	1 A	BRASS	-30 Cel	1.654 inch		LATCHED	1 A	SOLDER		20 mohm	.394 inch	BRASS		12	24 V		24 V		30 deg	M10X0.75	.157 inch	BRASS
P36SMT303	Apem Components	ROTARY CODED SWITCH	SURFACE MOUNT-STRAIGHT	HEXADECIMAL	SPINDLE			0.1A@42VAC	GOLD OVER NICKEL	STAINLESS STEEL					100000000 ohm	TUBE	7.4 mm	7.4 inch			1		THERMOPLASTIC	GOLD OVER NICKEL	3.85 mm	0.1A@42VDC		125 Cel	.1 A	PHOSPHOR BRONZE	-50 Cel			LATCHED	.1 A	SOLDER		800 mohm		PHOSPHOR BRONZE		16	42 V		42 V					POLYAMIDE46
CK1049	Lorlin Electronics	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	SP12T	SPINDLE			.15A@250VAC					10000 Cycle(s)				26.2 mm				1				14.1 mm	.15A@250VDC		85 Cel	.15 A		-30 Cel		SILVER	LATCHED	.15 A	SOLDER						12	250 V		250 V	e4	30 deg
CK1051	Lorlin Electronics	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	3P4T	SPINDLE			1A@24VAC	GOLD		1500VAC	BRASS	10000 Cycle(s)		999000000 ohm		26.2 mm		.315 inch		1		GLASS FILLED POLYAMIDE66	SILVER	14.1 mm	1A@24VDC		85 Cel	1 A	BRASS	-30 Cel	1.653 inch		LATCHED	1 A	SOLDER		20 mohm		BRASS	15	4	24 V		24 V		30 deg	M10X0.75	.157 inch
PT65301	Apem Components	ROTARY CODED SWITCH	THROUGH HOLE-STRAIGHT	BINARY CODED DECIMAL	SPINDLE	ON-OFF	WAVE		GOLD OVER NICKEL			BRASS	10000 Cycle(s)	1.5VA@24VDC	100000000 ohm	TRAY	10 mm	10 inch	0 inch	MOLDED	1	BREAK-BEFORE-MAKE	THERMOPLASTIC	GOLD OVER NICKEL	6.5 mm	.4A@24VDC	SOLVENT	70 Cel		PHOSPHOR BRONZE	-20 Cel	.287 inch	Matte Tin (Sn)	LATCHED	.4 A	SOLDER	PT65	80 mohm		PHOSPHOR BRONZE	6	10	24 V	O-RING Si RUBBER ACTUATOR SEAL		e3	36 deg		.15 inch	NYLON

Rotary Switches

Rotary switches are electronic switches that are activated by rotating a dial or knob. They are commonly used in a variety of applications, such as audio equipment, industrial control systems, and consumer electronics.

Rotary switches typically consist of a housing, a dial or knob, and a set of electrical contacts. When the dial or knob is rotated, it completes a circuit between the contacts, allowing electrical current to flow through the switch. Some rotary switches also include detents or stops that provide tactile feedback as the dial is rotated.

Rotary switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Rotary switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.