Omron Snap Action & Limit Switches 2,400+

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	AC Maximum Rating R Load (Contact)	Angle (Actuator)	Dielectric Withstand Volts (V)	AC Maximum Rating M Load (Contact)	Electrical Life	Insulation Resistance	Body Length/Diameter	Body Width	Length (Bushing)	Sealing	Contact Timing	Maximum Operating Force	Body Height	DC Maximum Rating R Load (Contact)	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Manufacturer Series	Contact Resistance	Actuator Travel (mm)	End Contact Material	Maximum DC Contact Voltage	Additional Features	Maximum AC Contact Voltage	Maximum Pre Travel	JESD-609 Code	Terminal Length
D2F-01L-T	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-STRAIGHT	SPDT	HINGE LEVER						30000 Cycle(s)		12.8 mm	5.8 inch		IP40		1.47 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER			.55		30 V
SS-5GLT	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	HINGE LEVER		5A@125VAC				200000 Cycle(s)		19.8 mm	6.4 inch		IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel			MOMENTARY	5 A	QUICK CONNECT			2		14 V		125 V	1.2 mm
D4NL-4AFA-B	Omron	SNAP ACTING/LIMIT SWITCH
D2F-01L2-D3	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	HINGE ROLLER LEVER						30000 Cycle(s)		12.8 mm	5.8 inch		IP40		1.47 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER			.55		30 V
D2F-01L30-D3	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATED ROLLER LEVER						30000 Cycle(s)		12.8 mm	5.8 inch		IP40		1.47 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER					30 V
D4NL-4FFG-B	Omron	SNAP ACTING/LIMIT SWITCH																												D4NL
D2F-L-D3	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	HINGE LEVER		3A@125VAC				30000 Cycle(s)		12.8 mm	5.8 inch		IP40		1.47 N	6.5 mm	2A@30VDC	65 Cel	3 A		-25 Cel			MOMENTARY	2 A	SOLDER			.55		30 V		125 V
D2D-1000	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	PLUNGER	N.O.-N.C.	16A@250VAC	0 deg	2000VAC	4A@380VAC	100000 Cycle(s)	100000000 ohm	30 mm	13 inch	0 inch	IP40	DOUBLE BREAK	5.88 N	33.6 mm		85 Cel	16 A		-25 Cel	.417 inch		MOMENTARY		QUICK CONNECT		50 mohm	2.3			SCREW MOUNT	250 V			0 inch
D2F-L-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER		3A@125VAC				30000 Cycle(s)		12.8 mm	6.5 inch		IP40		1.47 N	5.8 mm	2A@30VDC	65 Cel	3 A		-25 Cel			MOMENTARY	2 A	SOLDER			.55		30 V		125 V
D2F-01FL-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER						30000 Cycle(s)		12.8 mm	6.5 inch		IP40		.74 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER			.55		30 V
D4SL-N4HFG-D	Omron	SNAP ACTING/LIMIT SWITCH
SS-5GL111-F	Omron	SNAP ACTING/LIMIT SWITCH
D4MC-5020	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	ROLLER PLUNGER		10A@250VAC				500000 Cycle(s)		55 mm	21.7 inch		IP67		5.88 N	45 mm	10A@14VDC	80 Cel	10 A		-10 Cel			MOMENTARY	10 A	SCREW			6.6		14 V		250 V	1.6 mm
SS-5GL13D	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-STRAIGHT	SPDT	SIMULATED ROLLER LEVER		5A@125VAC				200000 Cycle(s)		19.8 mm	6.4 inch		IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel			MOMENTARY	5 A	SOLDER			2		14 V		125 V	1.2 mm
D2F-FL2	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-STRAIGHT	SPDT	HINGE ROLLER LEVER		1A@125VAC				30000 Cycle(s)		12.8 mm	5.8 inch		IP40		.74 N	6.5 mm	.5A@30VDC	65 Cel	1 A		-25 Cel			MOMENTARY	.5 A	SOLDER			.55		30 V		125 V
D2F-L3-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER		3A@125VAC				30000 Cycle(s)		12.8 mm	6.5 inch		IP40		1.47 N	5.8 mm	2A@30VDC	65 Cel	3 A		-25 Cel			MOMENTARY	2 A	SOLDER			.5		30 V		125 V
SS-5GL111-FT	Omron	SNAP ACTING/LIMIT SWITCH
B3J-3100	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPST	HINGED TYPE						3000000 Cycle(s)		18 mm	12 inch				1.76 N	3.5 mm	.05A@24VDC	70 Cel			-25 Cel			MOMENTARY-TACTILE	.05 A	SOLDER			.3		24 V			.3 mm
D2HW-BR201DR	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER						100000 Cycle(s)		13.3 mm	6.5 inch		IP50		.75 N	5.3 mm	2A@12VDC	85 Cel			-40 Cel			MOMENTARY	2 A	SOLDER			1.4		12 V
D3V-165-1C5	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SHORT HINGE ROLLER LEVER		16A@250VAC				100000 Cycle(s)		27.8 mm	10.3 inch		IP00		2.35 N	15.9 mm	16A@8VDC	105 Cel	16 A		-25 Cel			MOMENTARY	16 A	QUICK CONNECT	D3V		2.4		8 V		250 V	1.6 mm
SS-5GL2D2	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE ROLLER LEVER		5A@125VAC				200000 Cycle(s)		19.8 mm	6.4 inch		IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel			MOMENTARY	5 A	SOLDER	SS		2		14 V		125 V	1.2 mm
D2F-FL-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER		1A@125VAC				30000 Cycle(s)		12.8 mm	6.5 inch		IP40		.74 N	5.8 mm	.5A@30VDC	65 Cel	1 A		-25 Cel			MOMENTARY	.5 A	SOLDER			.55		30 V		125 V
SS-5GL13	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATED ROLLER LEVER		5A@125VAC				200000 Cycle(s)		19.8 mm	6.4 inch		IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel			MOMENTARY	5 A	SOLDER			2		14 V		125 V	1.2 mm
D2F-01	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-STRAIGHT	SPDT	PIN PLUNGER						30000 Cycle(s)		12.8 mm	5.8 inch		IP40		1.47 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER			.75		30 V			.5 mm
D2HW-BL201DL	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER						100000 Cycle(s)		13.3 mm	6.5 inch		IP50		.75 N	5.3 mm	2A@12VDC	85 Cel			-40 Cel			MOMENTARY	2 A	SOLDER			1.4		12 V
Z-15GD-B	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SHORT SPRING PLUNGER		15A@250VAC				500000 Cycle(s)		49.2 mm	17.45 inch		IP00		3.43 N	25.5 mm	15A@14VDC	80 Cel	15 A		-25 Cel			MOMENTARY	15 A	SCREW			2		14 V		250 V	.4 mm
D2F-L3-D	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATED ROLLER LEVER		3A@125VAC				30000 Cycle(s)		12.8 mm	5.8 inch		IP40		1.47 N	6.5 mm	2A@30VDC	65 Cel	3 A		-25 Cel			MOMENTARY	2 A	SOLDER			.5		30 V		125 V
D2HW-A221D	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-STRAIGHT	SPDT	LONG HINGE LEVER						100000 Cycle(s)		13.3 mm	5.3 inch		IP50		.5 N	6.5 mm	2A@12VDC	85 Cel			-40 Cel			MOMENTARY	2 A	SOLDER			2.5		12 V
D2F-01L-A1	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE LEVER		A@VAC				30000 Cycle(s)		12.8 mm	6.5 inch		IP40		1.47 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER			.55		30 V
SS-5GLD	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-STRAIGHT	SPDT	HINGE LEVER		5A@125VAC		1500VAC	2A@250VAC	200000 Cycle(s)	100000000 ohm	19.8 mm	6.4 inch		IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A	SILVER	-25 Cel	.57 inch	Silver (Ag)	MOMENTARY	5 A	SOLDER			2	SILVER	14 V		125 V	1.2 mm	e4
SS-5GL13T	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATED ROLLER LEVER		5A@125VAC				200000 Cycle(s)		19.8 mm	6.4 inch		IP40		.49 N	10.2 mm	5A@14VDC	85 Cel	5 A		-25 Cel			MOMENTARY	5 A	QUICK CONNECT			2		14 V		125 V	1.2 mm
B3J-1100	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPST	HINGED TYPE						3000000 Cycle(s)		18 mm	12 inch				1.76 N	3.5 mm	.05A@24VDC	70 Cel			-25 Cel		Silver (Ag)	MOMENTARY-TACTILE	.05 A	SOLDER			.3		24 V			.3 mm	e4
D2F-L2	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-STRAIGHT	SPDT	HINGE ROLLER LEVER		3A@125VAC				30000 Cycle(s)		12.8 mm	5.8 inch		IP40		1.47 N	6.5 mm	2A@30VDC	65 Cel	3 A		-25 Cel			MOMENTARY	2 A	SOLDER			.55		30 V		125 V
SSG-5H	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	PIN PLUNGER		5A@125VAC				200000 Cycle(s)		19.8 mm	6.4 inch		IP00		1.5 N	9.9 mm	5A@14VDC	125 Cel	5 A		-25 Cel			MOMENTARY	5 A	SOLDER	SSG		1		14 V		125 V	.6 mm
SS-5GL111-FD	Omron	SNAP ACTING/LIMIT SWITCH
D2F-01FL3-D3	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATED ROLLER LEVER						30000 Cycle(s)		12.8 mm	5.8 inch		IP40		.74 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER			.5		30 V
D2F-01L-D3	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	HINGE LEVER						30000 Cycle(s)		12.8 mm	5.8 inch		IP40		1.47 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER			.55		30 V
SS-5GL111-F-3T	Omron	SNAP ACTING/LIMIT SWITCH
ZC-W2155	Omron	SNAP ACTING/LIMIT SWITCH																												ZC
D2VW-5L3-1MS	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATED ROLLER LEVER		5A@250VAC				100000 Cycle(s)		15.9 mm	10.3 inch		IP67		1.18 N	33 mm	5A@30VDC	90 Cel	5 A		-40 Cel			MOMENTARY	5 A	WIRE	D2VW		5.6		30 V		250 V	4 mm
SS-5GL111-F-2D	Omron	SNAP ACTING/LIMIT SWITCH
D2F-01FL3	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-STRAIGHT	SPDT	SIMULATED ROLLER LEVER						30000 Cycle(s)		12.8 mm	5.8 inch		IP40		.74 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER			.5		30 V
D2F-01FL3-D	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATED ROLLER LEVER						30000 Cycle(s)		12.8 mm	5.8 inch		IP40		.74 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER			.5		30 V
D2FS-FL-N-A1	Omron	SNAP ACTING/LIMIT SWITCH
SS-5GL111-F-2	Omron	SNAP ACTING/LIMIT SWITCH
D2F-01L3-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER						30000 Cycle(s)		12.8 mm	6.5 inch		IP40		1.47 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel			MOMENTARY	.1 A	SOLDER			.5		30 V
D4C-1603	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	CROSSROLLER PLUNGER		5A@250VAC				200000 Cycle(s)		40 mm	16 inch		IP67		6.86 N	51.5 mm	4A@30VDC	70 Cel	5 A		-10 Cel			MOMENTARY	4 A	WIRE	D4C		4.8		30 V	ELECTRICAL LIFE IS CALCULATED AT AN OPERATING TEMPERATURE 5 DEGREE TO 35 DEGREE	250 V	1.8 mm
SHL-Q2255	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPST	ROLLER PLUNGER		10A@250VAC				500000 Cycle(s)		73.5 mm	17.5 inch				9.81 N	35.9 mm	10A@14VDC	80 Cel	10 A		-10 Cel			MOMENTARY	10 A	SCREW	SHL		3.5		14 V		250 V	1.5 mm

Snap Action & Limit Switches

Snap action switches and limit switches are electronic switches that are commonly used in industrial control systems and other applications that require precise and reliable control of mechanical processes.

Snap action switches, also known as micro switches, are electrical switches that use a spring-loaded lever to activate the switch when a certain force or pressure is applied. They are commonly used in applications where a small and precise switch is needed, such as in appliances, vending machines, and automotive control systems.

Limit switches, on the other hand, are electrical switches that are activated when a moving object, such as a conveyor belt or door, reaches a specific position or limit. They are commonly used in industrial control systems to monitor the position of mechanical components and to prevent damage or accidents caused by overrunning or overshooting.

Both snap action switches and limit switches come in a variety of configurations, including normally open or normally closed switches, and can be wired to operate in a variety of ways, such as momentary or latching operation.