Omron Snap Action & Limit Switches 2,400+

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	AC Maximum Rating R Load (Contact)	Dielectric Withstand Volts (V)	Electrical Life	Insulation Resistance	Body Length/Diameter	Body Width	Sealing	Maximum Operating Force	Body Height	DC Maximum Rating R Load (Contact)	Maximum Operating Temperature	Operating Position	Maximum AC Contact Current	Minimum Operating Temperature	Length (Actuator)	Switch Action	Maximum DC Contact Current	Termination Type	Manufacturer Series	Contact Resistance	Actuator Travel (mm)	Maximum DC Contact Voltage	Maximum AC Contact Voltage	Maximum Pre Travel	Terminal Length
D2JW-011	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	PIN PLUNGER			100000 Cycle(s)		12.7 mm	5.3 inch	IP50	2.45 N	9.4 mm	.1A@30VDC	85 Cel			-40 Cel		MOMENTARY	.1 A	SOLDER			.9	30 V		.6 mm
D2LS-21	Omron	SNAP ACTING/LIMIT SWITCH
D2SW-P2L3M	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATED ROLLER LEVER	2A@250VAC		50000 Cycle(s)		19.8 mm	6.4 inch	IP67	.6 N	11 mm	2A@30VDC	70 Cel		2 A	-20 Cel		MOMENTARY	2 A	WIRE	D2SW-P		.8	30 V	250 V
D4NL-1EFA-B	Omron	SNAP ACTING/LIMIT SWITCH																						D4NL
D4NL-2CFG-B	Omron	SNAP ACTING/LIMIT SWITCH																						D4NL
D4NL-4DFG-B	Omron	SNAP ACTING/LIMIT SWITCH																						D4NL
D4NL-4EFA-B	Omron	SNAP ACTING/LIMIT SWITCH																						D4NL
D5B-5011	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT		HEMISPHERIC TYPE			5000000 Cycle(s)		5 mm		IP67	.49 N	16.2 mm	.03A@30VDC	70 Cel			-10 Cel		MOMENTARY	.03 A	WIRE	D5B		1	30 V		.6 mm
SHL-Q2255-01	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPST	ROLLER PLUNGER	.1A@125VAC		500000 Cycle(s)		73.5 mm	17.5 inch		9.81 N	35.9 mm	.1A@30VDC	80 Cel		.1 A	-10 Cel		MOMENTARY	.1 A	SCREW	SHL		3.5	30 V	125 V	1.5 mm
SS-01GL2	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	HINGE ROLLER LEVER	.1A@125VAC	1500VAC	200000 Cycle(s)	100000000 ohm	19.8 mm	6.4 inch	IP40	.49 N	10.2 mm	.1A@30VDC	85 Cel	.33 inch	.1 A	-25 Cel	.571 inch	MOMENTARY	.1 A	SOLDER		100 mohm	2	30 V	125 V	1.2 mm	.138 inch
SS-01GL2-E	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	HINGE ROLLER LEVER	.1A@125VAC		200000 Cycle(s)		19.8 mm	6.4 inch	IP40	.25 N	10.2 mm	.1A@30VDC	85 Cel		.1 A	-25 Cel		MOMENTARY	.1 A	SOLDER			2	30 V	125 V	1.2 mm
WLG2-LD	Omron	SNAP ACTING/LIMIT SWITCH
WLG2-LDS	Omron	SNAP ACTING/LIMIT SWITCH																						WL
WLG2-LDS-DGJS03	Omron	SNAP ACTING/LIMIT SWITCH																						WL
D2F-01-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	PIN PLUNGER			30000 Cycle(s)		12.8 mm	6.5 inch	IP40	1.47 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER			.75	30 V		.5 mm
D2F-01F-D3	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	PIN PLUNGER			30000 Cycle(s)		12.8 mm	5.8 inch	IP40	.74 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER			.75	30 V		.5 mm
D2FS-F-N-A1	Omron	SNAP ACTING/LIMIT SWITCH
D2HW-C203MRS	Omron	SNAP ACTING/LIMIT SWITCH
D2SW-01D	Omron
D2SW-01L3M	Omron
D2SW-3L1H	Omron
D2SW-P2L1D	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-STRAIGHT	SPDT	HINGE LEVER	2A@250VAC		50000 Cycle(s)		19.8 mm	6.4 inch	IP67	.6 N	11 mm	2A@30VDC	70 Cel		2 A	-20 Cel		MOMENTARY	2 A	SOLDER	D2SW-P		.8	30 V	250 V
D2SW-P2L2T	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	HINGE ROLLER LEVER	2A@250VAC		50000 Cycle(s)		19.8 mm	6.4 inch	IP67	.6 N	11 mm	2A@30VDC	70 Cel		2 A	-20 Cel		MOMENTARY	2 A	QUICK CONNECT	D2SW-P		.8	30 V	250 V
D2SW-P2L3T	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATED ROLLER LEVER	2A@250VAC		50000 Cycle(s)		19.8 mm	6.4 inch	IP67	.6 N	11 mm	2A@30VDC	70 Cel		2 A	-20 Cel		MOMENTARY	2 A	QUICK CONNECT	D2SW-P		.8	30 V	250 V
D2SW-P2T	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	PIN PLUNGER	2A@250VAC		50000 Cycle(s)		19.8 mm	6.4 inch	IP67	1.8 N	11 mm	2A@30VDC	70 Cel		2 A	-20 Cel		MOMENTARY	2 A	QUICK CONNECT	D2SW-P		1	30 V	250 V	.6 mm
D2VW-01L1A-1HS	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SHORT HINGE PLUNGER	.1A@125VAC		1000000 Cycle(s)		15.9 mm	10.3 inch	IP50	1.96 N	33 mm	.1A@30VDC	90 Cel		.1 A	-40 Cel		MOMENTARY	.1 A	QUICK CONNECT/SOLDER	D2VW		2.4	30 V	125 V	1.6 mm
D2VW-01L1A-1MS	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SHORT HINGE PLUNGER	.1A@125VAC		1000000 Cycle(s)		15.9 mm	10.3 inch	IP67	1.96 N	33 mm	.1A@30VDC	90 Cel		.1 A	-40 Cel		MOMENTARY	.1 A	WIRE	D2VW		2.4	30 V	125 V	1.6 mm
D3D-113	Omron
D3DC-2	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPST				100000 Cycle(s)		19 mm	8.5 inch	IP00		12.1 mm	.1A@30VDC	85 Cel			-25 Cel		MOMENTARY	.1 A	QUICK CONNECT	D3DC		7	30 V
D3M-01L1	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPST	HINGE LEVER			200000 Cycle(s)		29.2 mm	7 inch	IP00	1 N	10 mm	.1A@30VDC	85 Cel			-25 Cel		MOMENTARY	.1 A	QUICK CONNECT	D3M		.7	30 V
D3SH-A1L1	Omron	SNAP ACTING/LIMIT SWITCH	SURFACE MOUNT-RIGHT ANGLE	SPST				100000 Cycle(s)		3.1 mm	3 inch		.24 N	.9 mm	.001A@5VDC	85 Cel			-25 Cel		MOMENTARY	.001 A	SOLDER			3.8	5 V
D3V-163-1C5	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	LONG HINGE LEVER	16A@250VAC		100000 Cycle(s)		27.8 mm	10.3 inch	IP00	.69 N	15.9 mm	16A@8VDC	105 Cel		16 A	-25 Cel		MOMENTARY	16 A	QUICK CONNECT	D3V		11	8 V	250 V	9 mm
D3V-163-1C5-K	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	LONG HINGE LEVER	16A@250VAC		100000 Cycle(s)		27.8 mm	10.3 inch	IP00	.69 N	15.9 mm	16A@8VDC	105 Cel		16 A	-25 Cel		MOMENTARY	16 A	QUICK CONNECT	D3V		11	8 V	250 V	9 mm
D4F-420-5D	Omron	SNAP ACTING/LIMIT SWITCH																						D4F
D4SL-N2NFG-DN	Omron	SNAP ACTING/LIMIT SWITCH
D4SL-N4FFA-D	Omron	SNAP ACTING/LIMIT SWITCH																						D4SL-N
D4SL-N4GFG-D	Omron	SNAP ACTING/LIMIT SWITCH
D4SL-N4NFG-D	Omron	SNAP ACTING/LIMIT SWITCH
SS-10D	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-STRAIGHT	SPDT	PIN PLUNGER	10.1A@125VAC		50000 Cycle(s)		19.8 mm	6.4 inch	IP40	1.47 N	10.2 mm	10.1A@14VDC	85 Cel		10.1 A	-25 Cel		MOMENTARY	10.1 A	SOLDER			1	14 V	125 V	.6 mm
SS-3GL13PT	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATTED ROLLER LEVER	3A@125VAC		70000 Cycle(s)		19.8 mm	6.4 inch	IP40	.5 N	11 mm	3A@30VDC	85 Cel		3 A	-25 Cel		MOMENTARY	3 A	QUICK CONNECT			1	30 V	125 V
V-103-1A4	Omron	SNAP ACTING/LIMIT SWITCH
B3J-2300	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPST	HINGED TYPE			3000000 Cycle(s)		18 mm	12 inch		1.76 N	3.5 mm	.05A@24VDC	70 Cel			-25 Cel		MOMENTARY-TACTILE	.05 A	SOLDER			.3	24 V		.3 mm
B3J-7100	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPST	HINGED TYPE			3000000 Cycle(s)		18 mm	12 inch		1.76 N	3.5 mm	.05A@24VDC	70 Cel			-25 Cel		MOMENTARY-TACTILE	.05 A	SOLDER			.3	24 V		.3 mm
D2F-01FL-D3	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	HINGE LEVER			30000 Cycle(s)		12.8 mm	5.8 inch	IP40	.74 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER			.55	30 V
D2F-01FL2-D	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	HINGE ROLLER LEVER			30000 Cycle(s)		12.8 mm	5.8 inch	IP40	.74 N	6.5 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER			.55	30 V
D2F-01FL3-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIMULATED ROLLER LEVER			30000 Cycle(s)		12.8 mm	6.5 inch	IP40	.74 N	5.8 mm	.1A@30VDC	65 Cel			-25 Cel		MOMENTARY	.1 A	SOLDER			.5	30 V
D2F-FL30-D	Omron	SNAP ACTING/LIMIT SWITCH	PANEL MOUNT	SPDT	SIMULATED ROLLER LEVER	1A@125VAC		30000 Cycle(s)		12.8 mm	5.8 inch	IP40	.74 N	6.5 mm	.5A@30VDC	65 Cel		1 A	-25 Cel		MOMENTARY	.5 A	SOLDER				30 V	125 V
D2F-L2-A	Omron	SNAP ACTING/LIMIT SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	HINGE ROLLER LEVER	3A@125VAC		30000 Cycle(s)		12.8 mm	6.5 inch	IP40	1.47 N	5.8 mm	2A@30VDC	65 Cel		3 A	-25 Cel		MOMENTARY	2 A	SOLDER			.55	30 V	125 V

Snap Action & Limit Switches

Snap action switches and limit switches are electronic switches that are commonly used in industrial control systems and other applications that require precise and reliable control of mechanical processes.

Snap action switches, also known as micro switches, are electrical switches that use a spring-loaded lever to activate the switch when a certain force or pressure is applied. They are commonly used in applications where a small and precise switch is needed, such as in appliances, vending machines, and automotive control systems.

Limit switches, on the other hand, are electrical switches that are activated when a moving object, such as a conveyor belt or door, reaches a specific position or limit. They are commonly used in industrial control systems to monitor the position of mechanical components and to prevent damage or accidents caused by overrunning or overshooting.

Both snap action switches and limit switches come in a variety of configurations, including normally open or normally closed switches, and can be wired to operate in a variety of ways, such as momentary or latching operation.