Image shown is a representation only.
| Manufacturer | Apem Components |
|---|---|
| Manufacturer's Part Number | 25446NAH |
| Description | Other Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: DPDT; Type (Actuator): SLIDE; Contact Function: ON-ON; Solderability: WAVE; |
| Datasheet | 25446NAH Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 3 A |
| No. of Positions: | 2 |
| Center Contact Plating: | SILVER |
| Center Contact Material: | SILVER |
| Housing Material: | GLASS FILLED NYLON |
| Type (Actuator): | SLIDE |
| Maximum AC Contact Voltage: | 250 V |
| Solderability: | WAVE |
| Terminal Finish: | Silver (Ag) |
| Switch Action: | MAINTAINED |
| Terminal Material: | SILVER |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Manufacturer Series: | 25000N |
| Material (Actuator): | GLASS FILLED POLYAMIDE |
| Contact Resistance: | 10 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | 2 A |
| End Contact Material: | SILVER |
| Angle (Actuator): | 0 deg |
| Maximum DC Contact Voltage: | 30 V |
| DC Maximum Rating R Load (Contact): | 3A@30VDC |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Contact Function: | ON-ON |
| PCB Hole Count: | 6 |
| AC Maximum Rating R Load (Contact): | 2A@250VAC |
| Sealing: | EPOXY |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -40 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 7.493 inch |
| Switch Function: | DPDT |
| Terminal Length: | .15 inch |
| Length (Actuator): | .11 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | THERMOPLASTIC |
| Body Height: | 14.7066 mm |
| Body Length/Diameter: | 14.097 mm |
| Washability: | PARTIAL |
