MHSS1104 by Apem Components | Switches

Image shown is a representation only.

Manufacturer	Apem Components
Manufacturer's Part Number	MHSS1104
Description	SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): SLIDE; Solderability: WAVE; Switch Action: MOMENTARY-TACTILE;
Datasheet	MHSS1104 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.3 A
No. of Positions:	2
Center Contact Plating:	SILVER
Housing Material:	GLASS FILLED NYLON
Type (Actuator):	SLIDE
Solderability:	WAVE
Terminal Finish:	Silver (Ag)
Switch Action:	MOMENTARY-TACTILE
Termination Type:	SOLDER
Electrical Life:	5000 Cycle(s)
Maximum Operating Temperature:	70 Cel
Material (Actuator):	NYLON
Contact Resistance:	60 mohm
Insulation Resistance:	100000000 ohm
Angle (Actuator):	0 deg
Other Names:	MHSS1104-ND 679-1848
Maximum DC Contact Voltage:	6 V
DC Maximum Rating R Load (Contact):	.3A@6VDC
Dielectric Withstand Volts (V):	100VAC
PCB Hole Count:	6
Switch Type:	SLIDE SWITCH
Sealing:	EPOXY
JESD-609 Code:	e4
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	3.5 inch
Switch Function:	SPDT
Terminal Length:	.118 inch
Length (Actuator):	.079 inch
End Contact Plating:	SILVER
Insulator Material:	GLASS FILLED NYLON
Body Height:	3.5 mm
Body Length/Diameter:	8.5 mm
Washability:	PARTIAL

Popular Products

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.